Something similar may be posted but this is my own howto I figured the menus out on my own

MANUAL PROGRAM CODES

##000000 send button -- NAM PROGRAMMING also change sid here
SID LIST = [Only registered and activated users can see links. ]

#4357* send button -- Gives prl and sid info

LEGACY MODE FOR SERVICE BOOK TRANSFTER
options>advanced options>service books.
Hold ALT, and hit S/B/E/B




USED CDMA WORKSHOP 3.5

connect phone with desktop mgr
choose correct com port in main click connect (This only connects to comm port)
click read under main tab (Info should come up on left)
click mode under main tab and offline -d
click security tab under spc make sure spc / user lock is set to default (nv_read)
type spc code 000000
click spc button and send 000000
go to other tab under prl section click write browse to prl click ok
in nam programming program min and dir_number accordingly or ##000000 to program nam from phone
from main click mode then reset