Okay so I got really bored and bought a Kyocera Rise from eBay, searched everywhere for an SPC and gave up. In the mainland there's CricKet, in Hawaii, there's Mobi PCS. I work as their technician and I figured out how to unlock this thing for our company. So here's a tut of how to do it. This might work with the one for Virgin but I haven't tried yet. Bear with me, this is my first tut so if you have any questions, ask below. Here it goes!! (Please also note that this tut has stuff for Mobi PCS, if your flashing to CricKet, flash it with CricKet info instead of Mobi)

1. Make sure phone is charged and has a memory card in it.

2. Connect phone to WiFi. Go to Settings > Security and make sure that the "Unknown Sources" is checked off.

3. Go to [Only registered and activated users can see links. ] and let the app download.

4. Install the app then open it. Then click "Read SPC" and take note of the SPC.

5. Next, hit ##3424# (##DIAG#) and have it say "Enabled". DO NOT LEAVE THIS SCREEN AFTERWARDS OR Workshop will not recognize the port.

6. Open CDMA Workshop. I use the most recent 3.9. Connect to the Kyocera Serial Port. Go to the "Security" tab and insert that SPC you got from that MSL program on the phone.

7. Write your PRL in the "Other" tab

8. and program the phone like how you usually would.

If you have any other questions, post on the bottom. Peace out!