Join Today













Site Sponsor
Results 1 to 1 of 1
  1. #1
    Old Timer
    Join Date
    Jul 2010
    Posts
    2
    Rep Power
    0

    Default EVO Design full flash to cricket tutorial

    First off this tutorial is comprised of info from many source cu.com, xda, gurus, cellphone-gurus.com, sdk, and many others. This will give you root and full flash.
    Root methods I experimented with
    [Only registered and activated users can see links. ] the Frigid's HTC Super Tool v2 works OK but was a different user interface.
    That will get you rooted, s-off, recovery, etc.

    Now the flash, full flash to cricket for the HTC EVO Design 4G from Sprint or HTC Hero S from US Cellular

    I tried a couple methods to write this and maybe help future users. The first method I tried was the professional method using a paid version of CDMA WS. 3.6 and had no issues with the SPC. It worked good. Also used a paid method for MMS. (sold by Rich)

    Then I used the following from cu.com and have modified it to be better explained and tweaked a couple things.
    ********************************************
    install drivers
    Download drivers and unzip to a location on your harddrive.
    Open dialer and diall ##3424#, and that should put your phone in diag mode.


    Connect your phone to computer and let it try to install drivers.
    Now go to Start>rightclick My computer> Device Manager and right click Htc diag> Update Driver Software>Browse computer for driver software>Let me pick from a list of Device drivers on my computer>Have disk and browse to the unzip folder on your harddrive and look for (htcdiag in 32 bit) or (HtcUsbMdmV64 in 64 bit) and install drivers

    Get Msl
    Install Revskill (free version) and go to Menu>Hardware Forensic>Port Utils>Qc + At-cmd
    open and look for the port of diag mode phone(This app sopposedly works on all htc devices to change spc to 000000)
    Now go to code tab and click on Htc:Unlock spc
    Then click on Change Spc and your done with revskill. Close app

    program phone
    This is the point where you will be using QPST
    Install qpst
    open qpst configuration
    click on add port and add Usb/Qc diagnostic port (your phone diag port)
    Click on start Clients>Service Programming
    Phone should show up in menu and press ok
    Click on read from phone and send spc 000000 press ok
    Click on CDMA tab
    go to Directory# and put in your phone number.
    go to IMSI_S and put your min number
    click on roam tab and click on Browse and load your prl file
    Click on M.I.P tab and go to User profile 0
    fill in Nai "xxxxxxxxx@mycricket.com" X being your phone number
    do the same for Tethered Nai
    click on both enter text string bubbles and type cricket on both spaces
    MN-HA SPI= 12c
    MN-AAA SPI= 2
    DMU Public= 10
    Do the same for User profile 1
    now on M.I.P tab go to Active user and choose 0
    on Mobile IP Behavior change to Simple IP only
    Click on PPP config Tab
    press Um Button
    fill in tethered Nai to "xxxxxxxxx@mycricket.com" X being your phone number
    do the same for User ID
    password put in cricket
    now click on AN button
    fill in User Id to "xxxxxxxxx@mycricket.com" X being your phone number
    and password cricket
    Now while in QPST, find the EVRC area, and change all the setting to EVRC (if they are not already) this will prevent the problem of no outgoing calls in some areas.
    now click on write to phone and wait for it to reboot you should have (talk, text, and internet working)

    MMS
    This method I did not have success with and used Rich's app.

    install Apn Backup and restore on your phone and astro file manager from the market to your phone
    open apn Backup and restore and click on backup apn and save it
    open astro file manager and to to the saved xml file in the apnbackupand restore folder and open as test
    in the Production part of the apns
    find MMS PROXY and put "null" between quotes
    do the same for MMS PORT
    In the mmsc fill in "http://mms.mycricket.com/servlets/mms"
    now save file
    close astro file manager and open apnbackupandrestore again
    click on delete apns and delete apns
    now click on restore apn and choose the apn you just modified
    now open up messaging app and go to settings
    scroll down to Maximum message size and choose 500k

    If youtube won't load videos

    open dialer and dial ##3282#
    click on edit and type in 000000 for code
    now click on advanced
    Scroll down to RTSP/HTTP Settings
    Delete RTSP proxy ip and HTTP proxy ip info
    and change both ports to zero now backup to main screen and reboot your phone
    Source for this portion:[Only registered and activated users can see links. ]
    ********************************************
    If done correctly you will have a fully flashed EVO Design or Hero S to cricket.

    For the f'ing idiot that will come along and say give credit you obviously did not read and should return to school and learn.

    I will be adding more tutorials in the next weeks to come as I get more devices in. I will make the threads similar, as for root, flash and what worked and didn't.
    Last edited by cricketandroid; 05-31-2012 at 02:21 PM.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •