This is some info for FG2000
I am working on this device, is anyone else?
some info for it
I have the comports enabled now
Hardware id's are as follows
900E
USB\VID_05C6&PID_900E&REV_0000
USB\VID_05C6&PID_900E

HID
USB\VID_1410&PID_B010&REV_0414&MI_00
USB\VID_1410&PID_B010&MI_00
===================================
ADB
USB\VID_05C6&PID_90B6&REV_0414&MI_04
USB\VID_05C6&PID_90B6&MI_04

MODEM
USB\VID_05C6&PID_90B6&REV_0414&MI_02
USB\VID_05C6&PID_90B6&MI_02

DIAG
USB\VID_05C6&PID_90B6&REV_0414&MI_03
USB\VID_05C6&PID_90B6&MI_03

USB COMPOSITE DEVICE
USB\VID_05C6&PID_90B6&REV_0414
USB\VID_05C6&PID_90B6

HID
USB\VID_05C6&PID_90B6&REV_0414&MI_05
USB\VID_05C6&PID_90B6&MI_05

Remote NDIS
USB\VID_05C6&PID_90B6&REV_0414&MI_00
USB\VID_05C6&PID_90B6&MI_00
========================================

and partitions
this one has the older 26-partition layout/build
dev: size erasesize name
mtd0: 00280000 00040000 "sbl"
mtd1: 00280000 00040000 "mibib"
mtd2: 01500000 00040000 "efs2"
mtd3: 001c0000 00040000 "tz"
mtd4: 00100000 00040000 "tz_devcfg"
mtd5: 00180000 00040000 "ddr"
mtd6: 00100000 00040000 "apdp"
mtd7: 00100000 00040000 "xbl_config"
mtd8: 00100000 00040000 "multi_image"
mtd9: 00100000 00040000 "aop"
mtd10: 00100000 00040000 "qhee"
mtd11: 00100000 00040000 "abl"
mtd12: 00280000 00040000 "uefi"
mtd13: 00180000 00040000 "toolsfv"
mtd14: 00180000 00040000 "loader_sti"
mtd15: 00d00000 00040000 "boot"
mtd16: 00100000 00040000 "scrub"
mtd17: 06b40000 00040000 "modem"
mtd18: 001c0000 00040000 "misc"
mtd19: 00180000 00040000 "devinfo"
mtd20: 01900000 00040000 "recovery"
mtd21: 001c0000 00040000 "fota"
mtd22: 02b00000 00040000 "recoveryfs"
mtd23: 00100000 00040000 "sec"
mtd24: 00100000 00040000 "fotacookie"
mtd25: 11200000 00040000 "system"

====================================
I am working today to compile firmware for this device and will add to this when complete
EDIT---It is complete now

ubi info for system and the modem

UBI version: 1
Count of UBI devices: 2
UBI control device major/minor: 10:54
Present UBI devices: ubi0, ubi1

ubi0
Volumes count: 1
Logical eraseblock size: 253952 bytes, 248.0 KiB
Total amount of logical eraseblocks: 1096 (278331392 bytes, 265.4 MiB)
Amount of available logical eraseblocks: 0 (0 bytes)
Maximum count of volumes 128
Count of bad physical eraseblocks: 0
Count of reserved physical eraseblocks: 40
Current maximum erase counter value: 70
Minimum input/output unit size: 4096 bytes
Character device major/minor: 502:0
Present volumes: 0

Volume ID: 0 (on ubi0)
Type: dynamic
Alignment: 1
Size: 1052 LEBs (267157504 bytes, 254.8 MiB)
State: OK
Name: rootfs
Character device major/minor: 502:1

===================================

ubi1
Volumes count: 1
Logical eraseblock size: 253952 bytes, 248.0 KiB
Total amount of logical eraseblocks: 429 (108945408 bytes, 103.9 MiB)
Amount of available logical eraseblocks: 0 (0 bytes)
Maximum count of volumes 128
Count of bad physical eraseblocks: 0
Count of reserved physical eraseblocks: 40
Current maximum erase counter value: 8
Minimum input/output unit size: 4096 bytes
Character device major/minor: 501:0
Present volumes: 0

Volume ID: 0 (on ubi1)
Type: dynamic
Alignment: 1
Size: 385 LEBs (97771520 bytes, 93.2 MiB)
State: OK
Name: modem
Character device major/minor: 501:1

IMEI, MEID, ESN, and FID repairs working now
TTL repair working
I have compiled a working system and modem firmware now.
working to make the other partitions now.

Version: chimay-insg-1.0

[Only registered and activated users can see links. ]