INSEEGO wavemaker FW2000e AND FW2000 HACKING AND INFO THREAD

[rich hathaway]

I just got one of these a few days ago and have been at it for a few days now.
This thing is a beast!
Here are some facts about it taken from the official datasheet which I will attach for reference.

Network Connectivity*
• 5G sub-6 GHz
• 4G LTE Cat 22
• 4x4 MIMO sub-6 GHz
• 256 QAM sub-6 GHz
Bands Supported
• 5G NR: n1/n2/n3/n5/n7/n12/n20/n25/n28/n38/
n40/n41/n46/n48/n66/n71/n77/n78
• 4G LTE: B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/
B17/B20/B25/B26/B28/B29/B30/B32/B38/B39/
B40/B41/B42/B43/B46/B48/B66/B71
• Band support varies by regional SKU
Chipset
• Qualcomm® Snapdragon™ SDX55
Ports
• (1) 5Gbps Ethernet LAN port
Power
• Power over Ethernet (PoE) - 802.3bt Type 3
High Gain Antennas
• 14dBi: 3.3GHz - 4.2GHz
• 12dBi: 1.7GHz - 2.7GHz
• 5dBi: 1.5GHz
• 0-4dBi: 600MHz - 1.0GHz
=================================
its big, bulky and heavy, weighing in at about 10 lbs, but this enclosure has it all (imho) if you can get by the size
and weight, I have it inside my house at the moment and it works just fine, hope it not giving me brain cancer or something with its awesome power lolol.
So the guy that sent it to me was wanting me to perform some magic with the IMEI, ESN, MEID & FID and then make a patch and hard code the TTL and then there are some functions missing from the admin page such as IPPT, APN, Network Technologies etc. That needed to be added back in so the end user can adjust as needed.
this device basically has the same firmware as the M2000 and is even byte by byte identical in most/alot of it.
It even references itself as a M2000 and in some cases A mifi 8xxx.
It came with the ports enabled already via the micro usb port so that cut out alot of work right there.

Most of the technical stuff is similar to all the new class of inseego devices as far as reading/writing to the baseband with the exception of the user interface has a watchdog now. I guess this what they are calling their
"
Security
• 3rd Party cybersecurity penetration testing verified
• Security hardened web interface "

what I say to that is
lets rebrand it!


[Only registered and activated users can see links. ]


and added some of the fields they left out
such as MDN,MEID,ESN,SID,ERI,PRL



[Only registered and activated users can see links. ]

enabled some hidden menus


[Only registered and activated users can see links. ]

They had the IPV6 boolean blocked, I enabled it and made it visible again

[Only registered and activated users can see links. ]


They hid the advanced menu so I un-hid it


[Only registered and activated users can see links. ]

so after all this and with the magic and TTL patch done this thing is blazing fast, I am in the middle of the woods in Kansas
and this is what I am getting with 2 bars of signal (-122)

[Only registered and activated users can see links. ]

I flashed one remotely for the guy that sent me this one and here is his results


[Only registered and activated users can see links. ]
continued in next post