Join Today













Site Sponsor
Results 1 to 6 of 6
  1. #1
    Newb
    Join Date
    May 2011
    Posts
    4
    Rep Power
    0

    Default Slow 3G after changes

    I had gotten an evo flashed to cricket and all services were working properly, but I was getting error 67 left and right, literally whenever i tried to use any service, it would still work, but this would pop up, so I changed my setting from:

    Active Profile: 1
    Username: [Only registered and activated users can see links. ]
    SPI MN-HA: 4D2
    SPI MN-AAA: 4D2
    Reverse Tunnel Preffered: Enable
    Home IP Adress: 0.0.0.0
    Primary Home Agent: 255.255.255.255
    Second Home Agent: 68.28.177.76
    HA Shared Secret: ******
    AAA Shared Secret: ******
    DSA Server URL: [Only registered and activated users can see links. ]

    MEID(HEX): A100000D9D7E4E
    P_REV: IS-2000 (6)
    SCM: 58
    Slot Mode: Enable
    Slot Cycle Index: 2
    MCC: 310
    MNC: 00
    ACCOLC: 0
    Vocoder: Enable
    Roam Orig: Voice 13k
    LBS PDE IP: <Not available>
    LBS PDE Port: <Not available>
    Home sys Reg: Enable
    Foreign Sys Reg: Enable
    Foreign NID Reg: Enable
    DDTM: Disable
    Home SID/NID #1: 5033/65535
    MMS Server URL: [Only registered and activated users can see links. ]
    RTSP Proxy Port: 554
    RTSP Proxy Address: rtsp.vog.sprintpcs.com
    HTTP PD Proxy Port: 8085
    HTTP PD Proxy Address: pd.vog.sprintpcs.com

    to

    Active Profile:1
    UserName:yourtendigitnumber@mycricket.com
    Spi MN:HA: 12c
    spi mn:AAA:2
    Reverse Tunel:Enable
    home IP:0.0.0.0
    Primary Home:68.28.15.12
    Second Home:68.28.31.12
    HA Shared Secret:cricket
    AAA shared cricket:cricket
    DSA:Leave it as it is

    Slot Cycle Index:
    MCC:310
    MNC:00
    ACCOLC:2
    Vocoder:Enable
    EVRC-B: Disable
    Home Orig:Voice 13k
    Roam Orig:Voice 13k
    LBS PDE IP: Blank
    LBS PDE Port: BLANK
    Home Sys Reg:enable
    Foreign SID reg:enable
    Foreign NID Reg: Enable
    MMS Server URL: [Only registered and activated users can see links. ]
    RTSP Proxy: 8080
    RTSP Proxy Address: wap.mycricket.com
    HTTP PD Proxy Port: 8080
    HTTP PD Proxy Address: wap.mycricket.com


    as recommended on this forum. Technically everything still works, as far as I can tell, but my internet and youtube etc have slowed to a crawl. Any advice is greatly appreciated. Thank you in advance.

    EDIT: ALSO, STILL GETTING ERROR 67, AND NOW ALSO 131. Mostly when i activate the hotspot.
    Last edited by Ravenouschaos; 05-14-2011 at 09:13 PM.

  2. #2
    Newb
    Join Date
    Jan 2010
    Location
    Denver, CO.
    Posts
    20
    Rep Power
    0

    Default Re: Slow 3G after changes

    Are u on a proxy flash?

  3. #3

    iPhone Moderator, Trusted Guru &
    CDMA GURUS Booster
    rich hathaway's Avatar


    Join Date
    Apr 2010
    Location
    kansas city
    Posts
    2,962
    Rep Power
    5945

    Default Re: Slow 3G after changes

    error 67 is an error from sprint,i had a custy in here with the same prob. saturday,when the phone gets its 3g signal it is trying to connect to data services and uses the homepage @sprintpcs.com--- hence the user name and pass error 67 from sprint, so change your homepage to anything but sprint, and it wont keep trying to connect to sprint data services rejecting your user and pass throwing that error.( i changed to google for the homepage)
    Custom tools and custom phone & mifi firmwares built to your specs.Contact me !

    I WILL NOT ANSWER SUPPORT QUESTIONS THRU PRIVATE MSG.
    See mifis.us for unlimited data on vzw-AT&T-TMO-or some MVNO's (Resellers welcome)

    www.mifis.us <--get yer unlimited data mifis here

  4. #4
    Newb
    Join Date
    May 2011
    Posts
    4
    Rep Power
    0

    Default Re: Slow 3G after changes

    Not sure what a proxy flash is, sorry, and my web page is set to google as well. After some closer observation the errors come up when I toggle mobile networks or wifi. Sometimes it is there when I go to unlock the phone, or when I bring up the android market. Some forums are saying this may be caused by a setting in the m.ip tab in QPTS. According to them it's because the authentification setting is set to simp+mob instead of just simp. I have qpst and the diag drivers, but does anyone know if I can edit just that setting without a full reflash? Since all services work i'd rather not mess that up, thanks for the responses.

  5. #5

    iPhone Moderator, Trusted Guru &
    CDMA GURUS Booster
    rich hathaway's Avatar


    Join Date
    Apr 2010
    Location
    kansas city
    Posts
    2,962
    Rep Power
    5945

    Default Re: Slow 3G after changes

    if your on the 60z plan you are not using a proxy,if your on the 45 dollar plan you are going thru a proxy to connect to the internet.
    i have'nt used qpst to flash one because we have workshop,but i will tell you every one we have done we use mip+sip
    if it were mine i would check the evdo tab w/workshop.
    the updates sprint is sending is messing with alot of phones
    Custom tools and custom phone & mifi firmwares built to your specs.Contact me !

    I WILL NOT ANSWER SUPPORT QUESTIONS THRU PRIVATE MSG.
    See mifis.us for unlimited data on vzw-AT&T-TMO-or some MVNO's (Resellers welcome)

    www.mifis.us <--get yer unlimited data mifis here

  6. #6
    Newb
    Join Date
    May 2011
    Posts
    4
    Rep Power
    0

    Default Re: Slow 3G after changes

    Ah, ok, no, then im not on a proxy flash. I heard the simp auth only applies to evos flashed to cricket. I will dl workshop and see what it says then get back to you, thanks.


 

Similar Threads

  1. Slow upload speeds (HTC EVO on Cricket)
    By CLH in forum [cricket] HTC Evo
    Replies: 4
    Last Post: 05-28-2011, 06:10 PM
  2. Slow 3G after changes
    By Ravenouschaos in forum [cricket] Droid
    Replies: 0
    Last Post: 05-14-2011, 08:23 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •