Slow 3G after changes

[Ravenouschaos]

I had gotten an evo flashed to cricket and all services were working properly, but I was getting error 67 left and right, literally whenever i tried to use any service, it would still work, but this would pop up, so I changed my setting from:

Active Profile: 1
Username: [Only registered and activated users can see links. ]
SPI MN-HA: 4D2
SPI MN-AAA: 4D2
Reverse Tunnel Preffered: Enable
Home IP Adress: 0.0.0.0
Primary Home Agent: 255.255.255.255
Second Home Agent: 68.28.177.76
HA Shared Secret: ******
AAA Shared Secret: ******
DSA Server URL: [Only registered and activated users can see links. ]

MEID(HEX): A100000D9D7E4E
P_REV: IS-2000 (6)
SCM: 58
Slot Mode: Enable
Slot Cycle Index: 2
MCC: 310
MNC: 00
ACCOLC: 0
Vocoder: Enable
Roam Orig: Voice 13k
LBS PDE IP: <Not available>
LBS PDE Port: <Not available>
Home sys Reg: Enable
Foreign Sys Reg: Enable
Foreign NID Reg: Enable
DDTM: Disable
Home SID/NID #1: 5033/65535
MMS Server URL: [Only registered and activated users can see links. ]
RTSP Proxy Port: 554
RTSP Proxy Address: rtsp.vog.sprintpcs.com
HTTP PD Proxy Port: 8085
HTTP PD Proxy Address: pd.vog.sprintpcs.com

to

Active Profile:1
UserName:yourtendigitnumber@mycricket.com
Spi MN:HA: 12c
spi mn:AAA:2
Reverse Tunel:Enable
home IP:0.0.0.0
Primary Home:68.28.15.12
Second Home:68.28.31.12
HA Shared Secret:cricket
AAA shared cricket:cricket
DSA:Leave it as it is

Slot Cycle Index:
MCC:310
MNC:00
ACCOLC:2
Vocoder:Enable
EVRC-B: Disable
Home Orig:Voice 13k
Roam Orig:Voice 13k
LBS PDE IP: Blank
LBS PDE Port: BLANK
Home Sys Reg:enable
Foreign SID reg:enable
Foreign NID Reg: Enable
MMS Server URL: [Only registered and activated users can see links. ]
RTSP Proxy: 8080
RTSP Proxy Address: wap.mycricket.com
HTTP PD Proxy Port: 8080
HTTP PD Proxy Address: wap.mycricket.com


as recommended on this forum. Technically everything still works, as far as I can tell, but my internet and youtube etc have slowed to a crawl. Any advice is greatly appreciated. Thank you in advance.

EDIT: ALSO, STILL GETTING ERROR 67, AND NOW ALSO 131. Mostly when i activate the hotspot.