Join Today













Site Sponsor
Results 1 to 6 of 6
  1. #1
    Newb
    Join Date
    Oct 2010
    Posts
    6
    Rep Power
    0

    Default COM Port/Driver problem - QPST - Evo Shift not recognized with diag drivers

    Basically, When i install the HTC Diag drivers for an Evo Shift I'm attempting to do an MEID repair on, the port does not show up on device manager under COM ports. Under modems -> device properties for the HTC USB Modem that comes up, a port number is assigned. CDMAWS finds the port fine. When In QPST config, the port does not show up unless I uncheck the box that says "Show serial and USB/QC diagnostic ports only"

    When I do uncheck that box and select the port, it recognizes that it is plugged in and shows the ESN, but none of the QPST clients are able to communicate with it. I don't get error messages or anything along those lines, just.. no action. A few will load me in and only give me the 'work in offline mode' option. For all intents and purposes, this phone is dead to QPST, but works everywhere else.

    I've tried multiple downloads of the HTC diag drivers from different sources, hoping one will populate a slot in device manager under Com ports and in QPST.. No luck there. Wondering if there is an easy fix for this or if someone could point me in the right direction.

    I'm thinking this belongs in this forum, but feel free to move this if you think its more of an HTC problem than a QPST one.

    Thanks in advance - and thanks for keeping this forum up. I'm no pro - amateur/hobbiest/poor guy trying to get by at best.. but you guys have been a great resource for me and are routinely the first place i turn to when.. tinkering

  2. #2
    Newb
    Join Date
    Mar 2011
    Posts
    16
    Rep Power
    0

    Default Re: COM Port/Driver problem - QPST - Evo Shift not recognized with diag drivers

    Same thing happened to me, but this works 90% of the time, reboot computer and your phone, now plug your phone into the computer and ##etc# to put device into diag mode, do these steps every time you install a new driver to your pc!

  3. #3
    Android device Moderator Scuba's Avatar
    Join Date
    Nov 2010
    Location
    GA
    Posts
    203
    Rep Power
    133

    Default Re: COM Port/Driver problem - QPST - Evo Shift not recognized with diag drivers

    Ok guys there is an easy fix for this problem...Just go download a newer version of QPST and it will see the Evo Shift fine...I have QPST 2.7 Build 366
    and it works fine on it...Good luck

  4. #4
    Newb
    Join Date
    Mar 2011
    Posts
    16
    Rep Power
    0

    Default Re: COM Port/Driver problem - QPST - Evo Shift not recognized with diag drivers

    What is the best qxdm version to use on the evo shift or does it not matter!

  5. #5
    Newb
    Join Date
    Jun 2011
    Location
    the bright side of everything
    Posts
    1
    Rep Power
    0

    Default Re: COM Port/Driver problem - QPST - Evo Shift not recognized with diag drivers

    Hello, I'm having the same trouble but none of the mentioned ssolutions are working. I have tried just about all htc diag drivers I can find anywhere and no luck can't get the EVO shift on a port I have HTC sync installed, I did my friends EVO and it worked time bit now iv been trying for two.days can anyone help me figure out what I need to do?

  6. #6
    Newb
    Join Date
    Dec 2013
    Posts
    7
    Rep Power
    0

    Default Re: COM Port/Driver problem - QPST - Evo Shift not recognized with diag drivers

    Thank you for info


 

Similar Threads

  1. Replies: 1
    Last Post: 12-02-2011, 02:23 PM
  2. Possible to get VM Samsung Intercept into diag mode?
    By alnova1 in forum General Disscusion
    Replies: 3
    Last Post: 10-05-2011, 02:02 AM
  3. droid eris diag drivers
    By cassidy89 in forum [cricKet] HTC Eris
    Replies: 13
    Last Post: 12-04-2010, 10:23 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •