Yes I did, but it didn't help... tried to search on other forums but, there are people having the same problem and still didn't get any solutions
OK so if you list what you have done that works and what you've done that doesn't work. I might be able to point you in a direction. Also list tools that you are using like QPST, CDMA workshop. Builds and if they are cracked or paid versions.
Ok, what I've done so far is some EPST settings tune ups:
USERNAME:
[Only registered and activated users can see links. ]
SPI MN-HA - 12c
SPI MN-AAA - 2
Reverse Tunnel Preffered - Enable
Home IP Address - 0.0.0.0
Primary Home Agent - 68.28.15.12
Second Home Agent - 62.28.31.12
DSA Server URL - left as is
ADVANCED:
P_REV IS-2000 (6)
SCM - 58
Slot Mode - Enable
Slot Cucle Index 2
MCC(Mobile Country Code) - 310
MCN(Mobile Network Code) - 00
ACCOLC(Access Overload Class) - 2
Vocoder - Disable
Home Orig - EVRC
Roam Orig - 13K
Home Sys Registration - Enable
Foreign SID Registration - Enable
Foreign NID Registration - Enable
MN HA SPI Set - Enable
MN AAA SPI Set - Enable
Home SID/NID #1 - 6503/65535
All that I've done through EPST Edit Mode on my phone. Also put my active account settings(username: [Only registered and activated users can see links. ], password: metropcs) with QPST Service Programming(version 2.7 build 323, don't know whether it hacked or not but it works). It appears that mobile network is working as 1x symbols show up on top. I've created a proxy settings shortcut with anycut and put HostName: wap.metropcs.net and Port 3128. But I still cannot load any web page.
Some of the setting that you have are for cricket try the following in EPSTOk, what I've done so far is some EPST settings tune ups:
USERNAME:
[Only registered and activated users can see links. ]
SPI MN-HA - 12c
SPI MN-AAA - 2
Reverse Tunnel Preffered - Enable
Home IP Address - 0.0.0.0
Primary Home Agent - 68.28.15.12
Second Home Agent - 62.28.31.12
DSA Server URL - left as is
ADVANCED:
P_REV IS-2000 (6)
SCM - 58
Slot Mode - Enable
Slot Cucle Index 2
MCC(Mobile Country Code) - 310
MCN(Mobile Network Code) - 00
ACCOLC(Access Overload Class) - 2
Vocoder - Disable
Home Orig - EVRC
Roam Orig - 13K
Home Sys Registration - Enable
Foreign SID Registration - Enable
Foreign NID Registration - Enable
MN HA SPI Set - Enable
MN AAA SPI Set - Enable
Home SID/NID #1 - 6503/65535
All that I've done through EPST Edit Mode on my phone. Also put my active account settings(username: [Only registered and activated users can see links. ], password: metropcs) with QPST Service Programming(version 2.7 build 323, don't know whether it hacked or not but it works). It appears that mobile network is working as 1x symbols show up on top. I've created a proxy settings shortcut with anycut and put HostName: wap.metropcs.net and Port 3128. But I still cannot load any web page.
Found these setting in the metro forum at Ho-Fo give them a try [Only registered and activated users can see links. ] Also you may want to double check that you have WAP on the account and it is provisioned.Originally Posted by http://howardforums.comM.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = [Only registered and activated users can see links. ]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
and double check these setting from post 1 above
Originally Posted by post17. Press ##DATA# (##3282#) And Setup your Data for your phone and press menu and Commit So your phone Will Reboot
8. Install BetterCut or AnyCut on your phone and open it Press New ShortCut And Go To Activity It make take a couple of minutes for it to appear but when it Does Go down to Proxy Setting and Click It. It Will Ask for a Name make it whatever you want to. It should say shortcut created sucessfully. Go to your Home Screen and it should be somewhere on there press it and Edit it For Cricket It should be HostNAME: wap.mycricket.com And Port Should be 8080 and for Metropcs HostName: wap.metropcs.net and Port Should Be 3128.
Didn't help either. I've heard something about cab-file which contains all the web settings and can be loaded on the phone. Is it possible to do it with my phone, where can I get that file?
Sorry cab files are for Windows Mobile. If I come up with any other suggestions I'll let you know.
Bookmarks