Step 1.

Remove your MicroSD card and plug the phone into your PC via USB cable then open
RUN THE PHONE THREW HOUDINI SOFT FIRST
THEN NAM PROGRAM THE PHONE ##000000#
First send the SPC CODE
USE CDMA-WORKSHOP AND WRITE THE EVDO TAB

ppp user is [Only registered and activated users can see links. ] PAP User [Only registered and activated users can see links. ]
ppp pass is 10Digitnumber PAP Pass 10Digitnumber
HDR USER [Only registered and activated users can see links. ] HDR User [Only registered and activated users can see links. ]
HDR PASS 10DigitNumber HDR Pass 10Digitnumber

CHANGE THE MOBILE IP TO SIMPLE. PROFILE ON 0 AND ACTIVE IS ON 0

once you are completed with this make sure you write to the phone and move on to the next step..

Step 2.

click on phone icon (on the phone)
click on the dialer..
enter ##3282#
click user name
click edit
enter your spc which should already be 000000 by now

Here are the settings:
User Name "10DigitNumber@1x.pocket.com"
SPI MN-HA "1234"
SPI MN-AAA "1234"
M Home Address "209.004.229.240"
Prim Ha Ip "064.034.197.141"
Sec Ha Ip "083.170.090.100"
Rev Tunneling "Off"
AAA Password "MIN # FROM POCKET "
HA Password "MIN # FROM POCKET ""

click done and allow the phone to reboot...


Step 3.

Now do ##3282# again.. this time go to browser
click edit
enter spc
youll see gateway1 and gateway2, under both of these
you will see primary and secondary,,, set primary and secondary ip`s for both gateways to 209.004.229.042,, they will all be the same ip address,, and set the Port 9200 and secure Port 443 for all gatways to ,, hit done and reboot.

THERE IS NO MMS SETTING AT THIS TIME THAT WORK SORRY