Samsung U360 Talk/Text/WAP/MMS Solution *NO DLL NEEDED*

[TimV26]

What you need:

CDMA WS 2.7 or 3.4.5
QPST 2.7 build 215
WinHEX
Cricket 1x PRL file
RG0.reg file
RG3.reg file


Open phone up in CDMA Workshop
Select correct port for phone and hit read.
Then go to security tab.
Send the following 16 digit password: 1945081520081106
This will pop the SPC up in the SPC area.
Click on SPC and hit send.
Then change the SPC to 000000. Hit SPC and select write. This will change SPC to 00000.
Close CDMA WS and say no when it asks to to a mode reset.
Open QPST 2.7 build 215
Select the port the phone is on.
Start Serivce programming.
For the Base Model, use SURFR6100-ZRF6155
Read phone.
Go to CDMA tab and program in MDN and MIN
Go to System tab and enter SID
Go to Roam and select your 1x PRL.
Go to M.IP tab and change to Simple IP only
Edit profile 0 so that NAI is [Only registered and activated users can see links. ] and the Tehtered NAI is [Only registered and activated users can see links. ]
go to PPP tab.
Hit Um button and ender [Only registered and activated users can see links. ] for Tethered NAI and User ID. Enter cricket for password.
Hit AN button and enter [Only registered and activated users can see links. ] for User ID. Enter cricket for password.
Click on write phone.
Close out of QPST for the time being.
Now you need to use WinHEX to modify the RG0.reg and RG3.reg files. These are located in the zip file that you need to hit thanks to see the link.Open the RG0.reg file
Go to View and select Text Display only
Where it says BROWSER_PROXY_USERNAME, change the 10 digits to the MDN
Save the changes and close the file.
Now open RG3.reg
where it says MMS_USERNAME, change the first 10 digits to the MDN
Where it says MMS_USERNAME_COMMERICAL, change the first 10 digits to the MDN
Save the changes and close RG0
After it finishes writing, close service programming.
Open QPST EFS Explorer
This will read the filesystem from the phone.
Go to Registry folder.
On the right side of the window, it will show the list of files.
Go to My Computer and open the folder where you have saved the registry keys.
You will need to drag the the 2 files to the right side of the EFS Explorer where it lists the files on the phone.
It will ask you to overwrite the files. Say yes.
Close EFS explorer.
Power cycle phone.
Try phone out.

If it does not work after writing the files, *228 the phone and start from the beginning. One other suggestion is to Write the PRL first, then *228 the phone. Then go ahead with the flash from the beginning. Both ways seem to get the phone working properly.


[hide-thanks][Only registered and activated users can see links. ][/hide-thanks]

[Pac3comm1]

to make your link clickable, put [url]your link goes here.com[ /url]. make sure you take the space out of the[ /. I just did it so you can see it. Nice guide.

[caaach]

great guide will this work for other samsungs as well

[rich hathaway]

most simple samsungs settings and data menu's are the same. you may run into a few that you will need the dll for because the some fields will revert back to defaults without using samsung pst with the proper dll's.

[TimV26]

this actually only works on newer samsung phones that have the same file system as the u360 and u820. If they have the same folders, chances it will work. You will have to pull original reg files from the phone and modify them rather than using these. I think it will also work on the samsung intensity II as well, but never tested that.

[ogad80]

Need help with Samsung Exclaim trying to full flash from Sprint to Cricket.