WHAT YOU WILL NEED:

1. Samsung USB Drivers -http://www.smscaster.com/download/Samsung_USB_Driver_Installer.exe

2. QPST found here - [Only registered and activated users can see links. ]

3. CDMA Workshop 2.7 or Later

4. Metro PCS PRL (search this site)


GUIDE

1. Remove the MicroSD card from the phone

2. plug the phone into the pc via usb

3. Find the COM Port ur phone is on (Right-click My Computer->Manage->Device Manager->Ports)

4. Open CDMA Workshop and read your phone by selecting the COM Port your phone is connected to, then click Read

5. Find the SPC (easy enuff right? if u can't find out how to ask a Guru)

6. Exit CDMA WS, then open QPST Configuration

7. Select your phone from the list of COM Ports given

8. Click "Start Clients" and open "SERVICE PROGRAMMING"

9. Click the "Roam" Tab

10. Navigate to the Preffered Roaming box

11. Browse for the Metro PCS PRL u downloaded and write it to the phone, it will as for the SPC...input the SPC and the phone will restart DO NOT RESPOND TO ANY ERRORS THAT COME UP ON QPST

12. Go to the "PPP Config" Tab then click on the little box that says "Um"

13. change the Username to your 10 digit metro [Only registered and activated users can see links. ]

14. change the password to metropcs

15. change both the primary and secondary DNS to 255.255.255.255 etc...

16. write to phone and wait for a restart.

**THE REST IS DONE FROM YOUR PHONE

17. press *228 and download the latest prl

18. Be happy

**this should work for all or most Samsung phones that don't run on Android firmware.