Join Today













Site Sponsor
Results 1 to 1 of 1

Thread: Root HTC Aria

Hybrid View

  1. #1
    Premium Member Pac3comm1's Avatar
    Join Date
    May 2010
    Location
    Atlanta Ga
    Posts
    748
    Rep Power
    732

    Default Root HTC Aria

    [hide-thanks]
    Requirements

    Note: If you're in Linux, you only need to do Step 4, Step 6, and Step 7.

    Step 0.
    Download and install HTC Sync: [Only registered and activated users can see links. ]

    Step 1.
    Download and unzip the Android SDK: [Only registered and activated users can see links. ]


    Step 2.
    Go into the folder where you unzipped the Android SDK and open "SDK Setup.exe".
    If you aren't greeted with a failed to fetch URL error, proceed to Step 3. If you did receive this error, go to Settings in

    the "Choose Packages to Install" window and check "Force https;//... sources to be fetched using http://..."
    Close and re-open "SDK Setup.exe".

    Step 3.
    When the "Choose Packages to Install" window pops up, make sure the package "Usb Driver package, revision x" is checked. You

    can uncheck everything else. Click Install. After it downloads and installs, close "Android SDK and AVD Manager".

    Step 4.
    With your device unplugged from your computer, go to Settings > Application > Development on your device and turn on USB

    Debugging.

    Step 5.
    Now plug your device in to your computer. This is just to make sure the USB drivers are installed.
    Once they are installed, unplug your device and turn it off.

    Step 6.
    This step is optional, but it may prevent an error later on in the process. If you've never formatted your SD card from a

    computer, remove it from the phone and format it in Windows or OSX with an external card reader. Then place the formatted

    card back in your phone, but leave the phone off.

    Step 7.
    Download the updated Root.zip from eugene373's guide:

    [Only registered and activated users can see links. ]


    Now let's get started...

    Step 0.
    Unzip Root.zip - Download

    Step 1.
    Place the contents ("update.zip", "ota.zip", and "loop") into the Android SDK tools folder.

    Step 2.
    Open Command Prompt or Terminal and CD to the SDK tools directory.

    Step 3.
    Power on your device into the bootloader by holding the "Volume Down" key and simultaneously pressing Power.
    Once you're in the bootloader, wait about 30 seconds until some diagnostic checking is done.
    Press "Volume Down" to highlight Recovery, but do not push Power to execute just yet.

    Step 4.
    Now run your loop file from the prompt (either type "loop" in Windows or "./loop.sh" in Linux) (refer to ice3186's post for

    Mac instructions)
    Note: The loop does nothing but show you the connection status of your phone. It's not technically required, but we'll use it

    in this guide.

    Step 5.
    Once the loop is running in your prompt, get ready to connect the phone to the computer with the USB cable, but don't connect

    one end quite yet. With Recovery still highlighted on your phone, you will need to push the Power button and then immediately

    plug in the other end of the USB cord.

    Step 6.
    After a few seconds, you should see your device listed in the loop.

    Step 7.
    Unplug the USB cable from the bottom of your phone and plug it back in. You probably don't need to do this, but let's be

    safe. Wait for your device to show up in the loop again. Hit CTRL-C to terminate the loop.

    Step 8.
    You should see a triangle/exclaimation over a phone graphic.
    Hold the "Volume Up" key (note it's Volume UP this time) and simultaneously press Power.
    After the menu comes up, use the volume and power buttons to select and run update.zip. (This will fail, but we already know

    that! Select it anyway.)

    Step 9.
    Paste the following command into your prompt and press Enter.
    adb push ota.zip /sdcard/update.zip (*OSX users add a ./ in front of all terminal commands please)

    Step 10.
    This is very important!! Have this next command ready in your prompt before running update.zip again!!
    This is the command. Paste it into your prompt, but DO NOT press Enter yet.
    adb push update.zip /sdcard

    Step 11.
    Run update.zip and as soon as you see a faint progress bar appear behind the text at the bottom of the screen, push Enter to

    execute the command in your prompt.

    Step 12.
    If successful, you should see Clockwork Recovery and you now have Su and Superuser.apk installed! You can now reboot your

    phone into the OS to verify. If unsuccessful, repeat steps 11 and 12.

    Credit goes to gtg465x at XDA-Developers for the write up and tutorial. Credit goes to Unrevoked team for rooting the device.

    DISCLAIMER: Unrevoked, XDA Developers and RootzWiki are not liable or responsible for any damages to your phones, this is

    solely the users decision to "root" their phone. Enjoy!
    [/hide-thanks]
    Last edited by Pac3comm1; 09-28-2010 at 12:24 PM.


 

Similar Threads

  1. HTC Eris ROOT for EVERYONE!!!
    By lj27416 in forum HTC Eris
    Replies: 18
    Last Post: 08-10-2017, 02:07 AM
  2. [ROOT] 1 click root Huawei ascent
    By ownmart in forum Ascend
    Replies: 2
    Last Post: 11-27-2011, 08:52 PM
  3. How to root evo 4g
    By Genuwine1976 in forum EVO 4G (Wimax &LTE)
    Replies: 10
    Last Post: 04-07-2011, 01:53 PM
  4. *Confirmed* Root on the Epic - adb root exploit
    By Genuwine1976 in forum Moment
    Replies: 0
    Last Post: 08-27-2010, 06:04 PM
  5. New root method for EVO 4G And Hero: UnrEVOked Is Here- One Touch Root
    By Genuwine1976 in forum EVO 4G (Wimax &LTE)
    Replies: 15
    Last Post: 07-24-2010, 03:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •