Flash HTC Mogul w/o CDMA Workshop

[ljay67]

WOOHOO! I wrote another. any pointers for editing this guide?

[Mr._Pseudonym]

;^) My favorite pointer is: Back up, back up, back up. Always keep copies of anything important that you post. You'll never know when you might want to re-post it somewhere else, for example....

[Dex]

well i added hide thanks once again and as u can see it worked properly

[ljay67]

ok as long as it works lol I'm fine, I can never hold anything against u guys cuz u helped me thru a lot of phone probs

[Pac3comm1]

Not bad for your first tutorial Ljay. You did leave out a few things, such as once the Prl is written, and ESN added to the inventory, they can call *228 and follow prompts to activate the device on their account. This is a clear alternitive to using CDMA WS. Now that the phone is active, lets add internet. For this you will need the following...

[hide-thanks]CM Proxy Killer
[Only registered and activated users can see links. ]

Arcsoft MMS Cab
[Only registered and activated users can see links. ]

Resco RegistryEditor
[Only registered and activated users can see links. ]

Resco explorer
[Only registered and activated users can see links. ]
[/hide-thanks]






Open the task manager to and look for a running process HTC_CM_Guardian. If it is not present, then its not running currently and you can proceed. If it is running, highlight it and kill task.
Now this is the tricky part. Be very careful when editing the registry. Once the programs above are installed, open the resco registry editor and click the binoculars at the bottom of the screen. When the search menu appears, type in CM Guardian. It will search thru the registry until it is located. Once it is located, on the lower left hand part of the screen you will see the word "up". Press it once and it will take you to the folder list where CM Guardian is located. Press the CM guardian folder until a menu pops up that says actions. Select actions and then delete the entire folder. It should give you the option to "Delete All". Do so. You have now removed .exe that gives you all sorts of trouble when trying to edit.

Finally,
WAP

1: Goto settings -> Connections -> Connections
2: Remove any connections that are there
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.

4: Set the following values:

M.IP Settings:
MIP_MODE = Simple IP Only

M.IP Default Profile:
NAI = [Only registered and activated users can see links. ]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)

Security:
HDR AN AUTH User Id = [Only registered and activated users can see links. ]
PPP USER ID = [Only registered and activated users can see links. ]
PPP PASSWORD = metropcs

5: Goto Connections and delete any existing connections and setup a new one using the following settings:

Number to dail = #777
Username: [Only registered and activated users can see links. ]
Password: metropcs
Domain: (Leave Blank)

Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)

6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.

Example if you leave as Sprint then choose that one as your internet connection and do it for both settings.

MMS

MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!

Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.

1: Install Arcsoft MMS version 5.0.70.24 from Verzion.

2: Open your Messaging and click on the SMS/MMS option.

3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.

4: Add a new server with the following settings:

Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: [Only registered and activated users can see links. ]
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K

5: Click "Done" and then set the new server as default.

6: Using a Registry Editor edit the following values:

[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]

DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )

[ljay67]

thanks Pace, forgot web so when r u gonne get started on that CDMA Workshop guide?