Join Today













Site Sponsor
Results 1 to 5 of 5
  1. #1
    Newb
    Join Date
    Jul 2010
    Posts
    9
    Rep Power
    0

    Default Com Port issue, M900

    So after a bunch of frustration, I finally got talk and text working on my Moment M900 on the Cricket network (still waiting for some more official Cricket ROMs to leak to set up WAP and MMS). At any rate, after I OTA'd the phone, I wanted to do something in QPST, so I hooked up the phone in diag mode (##8778# to put it into Modem mode, Debugging active and Dial Up Networking). The phone connected in diagnostic mode, but connected to a different port than before I had OTA'd it, and QPST wouldn't connect or recognize it anymore. Oddly, CDMA Workshop would connect, but still wouldn't read it.
    Seeing as how the port it connected to was com port 8, I changed it to a lower port number (port number 2), because I had heard CDMA Workshop sometimes has issues with anything above port 6. Still no luck.
    The weird thing is that the port I was using it on before I OTA'd (port1) claimed it was still in use. In a last ditch attempt to get it working, I connected to port 1 anyway, and still had no luck.
    Anyone have any ideas?

    Thanks in advance!

    M.

  2. #2
    Apprentice Guest's Avatar
    Join Date
    Aug 2010
    Location
    USA
    Posts
    64
    Rep Power
    70

    Default M900 Not Talking to QPST / CDMA Workshop

    CDMA Workshop would connec
    You should be able to Connect to any available port, it's pointless. I think it just means it can OPEN the port.

    The phone connected in diagnostic mode, but connected to a different port
    This can happen if you just use a different USB port and the drivers are requested/auto-loaded again. Did the hardware wizard come up? I assume you are on a Windows machine.

    Exactly what titles show up in Windows Device Manager (<Windows>-<R>, devmgmt.msc <ENTER>) related to your phone?

    CDMA Workshop sometimes has issues with anything above port 6
    I don't doubt what you say, just never heard of it before.

    Randomly trying ports probably will not help. Look in Device Manager and go with the port for the proper title.
    Code:
    ADB831A7FDD83DD1E2A309CE7591DFF8518ED29525738CEBDAC49C49E60EA9D303C7C0ACE395D80182DB07AE2C30F034
    70EFDF2EC9B086079795C442636B55FBC51CE410C124A10E0DB5E4B97FC2AF396F4922F45568161A8CDF4AD2299F6D23
    E4DA3B7FBBCE2345D7772B0674A318D570EFDF2EC9B086079795C442636B55FB5058F1AF8388633F609CADB75A75DC9D
    7F46165474D11EE5836777D85DF2CDAB106A6C241B8797F52E1E77317B96A2015058F1AF8388633F609CADB75A75DC9D
    0B3B97FA66886C5688EE4AE80EC0C3C2

  3. #3
    Apprentice
    Join Date
    Mar 2010
    Location
    Lincoln, NE
    Posts
    56
    Rep Power
    67

    Default

    Try just rebooting your pc. I doubt it has anything to do with the OTAP. Sounds like port conflicts which a reboot will clear out. Could be a cable going bad too. Hope it helps.

  4. #4
    Premium Member Wrecked Johnson's Avatar
    Join Date
    Mar 2010
    Location
    Bogata Columbia
    Posts
    426
    Rep Power
    254

    Default

    Manually assign the port and like drummerboy said restart the machine you should have no problems unless your cable is bad but doesnt sound like thats the case. Good luck!

  5. #5
    Newb
    Join Date
    Jul 2010
    Posts
    9
    Rep Power
    0

    Default

    Gonna be a little while before I can try any of these suggestions, but thanks everyone!

    Yeah, I was thinking either a reboot or at the very very least uninstall the drivers, clean out the registry and start from scratch. Just curious to know if there was a known issue before I started pulling my hair out and doing stuff I couldn't backtrack through.

    Thanks again!

    M.


 

Similar Threads

  1. Stock Firmware for Samsung Moment M900
    By Pac3comm1 in forum Moment
    Replies: 9
    Last Post: 01-15-2012, 02:11 PM
  2. Samsung Moment SPH-M900 Basic Flash How To
    By pctech101 in forum Moment
    Replies: 6
    Last Post: 10-24-2011, 12:41 PM
  3. Samsung M900 Firmware needed
    By poison_ivy in forum Samsung Bins and DLL's
    Replies: 3
    Last Post: 10-23-2010, 10:53 AM
  4. Samsung Moment(M900) On to PagePlus
    By 4MUSKRAT in forum Moment
    Replies: 5
    Last Post: 10-19-2010, 06:32 PM
  5. Little help unlocking my M900?
    By mort_subite in forum General Disscusion
    Replies: 7
    Last Post: 08-25-2010, 11:47 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •