Little help unlocking my M900?

[mort_subite]

So I'm not new to phone flashing and unlocking, but this is definitely my first Android. Currently, I'm kind of stuck trying to find my MSL. I've read it can be done from SDK, but I'm brand new to the software and only just now getting it installed. I've heard another way to find your MSL is to boot into self-test mode and connect via CDMA-Workshop (which I have), as per these instructions: [Only registered and activated users can see links. ]. However, I rooted my phone with Zefies Kernel before I started the unlocking process, and when I try to boot into self-test mode it just gives me the option to boot to system or to the recovery console.

At any rate, what I'd like to know is if there's a way to select the USB Test Menu from Zefies Recovery Console, or if I need to reflash the stock ROM and just start from scratch.

Thank you!

M.

[kc720]

on the phone, enable dialup networking under (menu/settings/wireless controls) and connect to cdma workshop and send 16 digit password (01F2030F5F678FF9)
there is your spc

[mort_subite]

Thank you very much for your help so far, and I hate to come off as such a n00b, but I connected to com6 (which is what port my phone is listed as connected to), entered the password and got the error "Failed... phone does not answer". Are there any other settings I'm missing? M.

[mort_subite]

Got, it! Thank you, btw.

For those having the same problem, 38400 needs to be selected as the baud rate in AT mode (the one listed below the Com port selection menu).

For those that are interested, I might actually put together a full tutorial for flashing to cricket once I finally get this thing completely done.

M.

[thephoneguy913]

Reboot System and Reboot phone...then start over...

[thephoneguy913]

There is a few Tutorials in how to flash most of the Android Phones...so I guess there is no need for another tutorial...but you are more than welcome to add your experiences about your flashing....