Join Today













Site Sponsor
Results 1 to 6 of 6
  1. #1
    Apprentice
    Join Date
    Feb 2010
    Location
    INDIANA
    Posts
    40
    Rep Power
    0

    Default Samsung Moment to PagePlus

    Credit goes to "zfxp" on [Only registered and activated users can see links. ] For the guide

    A guide I used with CDMA WS but you don't have to have it with guide.

    First and foremost, you need to have your moment ESN activated on p+

    next step, download this prl file, unzip it into a place you'll remember! [Only registered and activated users can see links. ]

    Next step download QPST 2.7.323 Google it!!!

    Assuming you have all of the samsung drivers for your phone to use as a modem. If not search this forum, you'll find them! Connect your phone, then Settings -> wireless* -> Check Dial-up networking.

    Now open "Qpst configuration" then add port, add your port that your phone is connected to.

    You'll need your MSL code, to obtain it, download "connectbot" from Marketplace, open connectbot, choose "local" hit enter, then type getprop, and look for "r1l.MSL", the 6-digit number is your MSL.

    next step is to enter your MSL on connection to qpst, by selecting your phone in qpst configuration, then hit "start clients" and click "Service programming", then hit okay, then click "Read from phone" then change it by viewing in qpst "service code" change it to 000000. Then proceed to "Roam" and upload the PRL you had previously downloaded at the beggining of the post, then at the bottom right, click "Write to phone"

    Your phone will restart, then once your phone has started dial *22890, programming will go through once it's finished restart your phone.

    Next step repeat to connect to QPST, goto mip tab edit profile "1" changed NAI and Tether NAI to Yourphonenumber(at)vzw3g.com
    Rev Tunnel Preferred: yes
    Home address: 0.0.0.0
    Primary HA address: 255.255.255.255
    Seconday HA address: 255.255.255.255
    MN-HA SPI: 12C
    MN-AAA SPI: 2
    DMU Public Key ID: 10
    DMU Mobile Authenticator: (empty)
    HA Shared Secret: (empty)
    AAA Shared Secret: (empty)
    Active User Profile: 1 (this appears to reset to 0 after every write)

    Now click the PPP Tab and change AN/UM to Yourphonenumber(at)vzw3g.com and use password "vzw" without th quotes, then go back to MIP tab, and change to Simple IP only.

    Then disable EVDO by going to dial pad dialing ##33284#, enter MSL which now should be "000000", hit HDR/1X Selection. Then choose CDMA only Mode hit okay then hit your home button.

    Restart and you SHOULD have internet.


    MMS! goto dialer, Dial ##DATA# goto MMSC URL, type MSL which should be "000000" at this point, replace your url with "http://mms.vtext.com/servlets/mms" press okay. and hit your home button.
    Last edited by 4MUSKRAT; 08-18-2010 at 02:35 PM.

  2. #2
    BABY NEWB captbob544's Avatar
    Join Date
    Jan 2011
    Location
    Dothan, Al.
    Posts
    15
    Rep Power
    0

    Default Re: Samsung Moment to PagePlus

    What is the password?

  3. #3
    Newb
    Join Date
    Nov 2012
    Posts
    2
    Rep Power
    0

    Default Re: Samsung Moment to PagePlus

    Can i please have the password?

  4. #4

    iPhone Moderator, Trusted Guru &
    CDMA GURUS Booster
    rich hathaway's Avatar


    Join Date
    Apr 2010
    Location
    kansas city
    Posts
    2,962
    Rep Power
    5945

    Default Re: Samsung Moment to PagePlus

    guys you see how old this thread is.lol. just use any vzw prl there are many out there,if the one you use doesnt seem to get good service just try another.but pp=vzw
    Custom tools and custom phone & mifi firmwares built to your specs.Contact me !

    I WILL NOT ANSWER SUPPORT QUESTIONS THRU PRIVATE MSG.
    See mifis.us for unlimited data on vzw-AT&T-TMO-or some MVNO's (Resellers welcome)

    www.mifis.us <--get yer unlimited data mifis here

  5. #5
    Newb
    Join Date
    Nov 2012
    Posts
    2
    Rep Power
    0

    Default Re: Samsung Moment to PagePlus

    ok can someone tell me what i did wrong. i followed the instructions but when i did the over the air programming the call drops and i have no signal. please some one help.

  6. #6

    iPhone Moderator, Trusted Guru &
    CDMA GURUS Booster
    rich hathaway's Avatar


    Join Date
    Apr 2010
    Location
    kansas city
    Posts
    2,962
    Rep Power
    5945

    Default Re: Samsung Moment to PagePlus

    you need to not only write your prl but your sid also,if you still have the sprint sid,ota wont work.so change it to one of the vzw sid's like 59 or 22 or for that matter you could probly leave it blank,just dont leave the sprint sid in there.
    Custom tools and custom phone & mifi firmwares built to your specs.Contact me !

    I WILL NOT ANSWER SUPPORT QUESTIONS THRU PRIVATE MSG.
    See mifis.us for unlimited data on vzw-AT&T-TMO-or some MVNO's (Resellers welcome)

    www.mifis.us <--get yer unlimited data mifis here


 

Similar Threads

  1. Samsung r100 on pageplus
    By captainkirks in forum General Disscusion
    Replies: 2
    Last Post: 01-30-2012, 12:46 AM
  2. Samsung Moment SMS FIX!!!!!
    By Wrecked Johnson in forum [cricKet] Moment
    Replies: 3
    Last Post: 03-23-2011, 03:41 PM
  3. how to fully flash the samsung free II sch-r360 to pageplus
    By amirs10000 in forum General Disscusion
    Replies: 0
    Last Post: 03-09-2011, 09:49 PM
  4. Samsung Moment(M900) On to PagePlus
    By 4MUSKRAT in forum Moment
    Replies: 5
    Last Post: 10-19-2010, 06:32 PM
  5. Replies: 2
    Last Post: 03-23-2010, 01:52 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •