Evo Talk, Text, Web and all apps

[ztahoez]

How to flash a Sprint Evo to Cricket with talk, text, and web
Put Phone in diag mode ##DIAG#
1. Use cdma workshop to get spc using the default read option change the SPC to 000000.
2. Write you nam and evdo tab as usuall and your desired prl.
3. Restart phone.
4. Using the provided CricketEVO.qcn load it using QPST then change the your10digit#@mycricket.com to your actual phone numbers on the MIP tab and the PPP UM and An tabs. Write to phone.
5. Close qpst and re-open workshop. On the EVDO TAB only write your numbers and cricket for the passwords in and click write. And set to simple ip.
6. If you have a 3g icon you are done with the manual programming. If not repeat steps 5 and 6. Now for rooting the device.
1. Copy PC36IMG.zip and Supersonic_1.32.651.1_rooted.zip to the root of your sd card.
2. Put the PC36IMG.zip on the root of your sdcard
3. Code:
4. adb push PC36IMG.zip /sdcard
5. - Power off the phone - Hold volume down while powering the phone on. continue to hold volume down until you see the WHITE bootloader screen. - After a few seconds it will begin to checking for files, and find PC36IMG.zip. while its doing this it will show a blue progress bar while its checking. (this takes 30 - 60 seconds to finish) - It will then list all the images in the zip and ask you if want to flash. SAY YES - When its finished it will ask you if you would like to reboot. AGAIN... SAY YES - At this point it will boot into a rooted rom. - YOU ARE NOW ROOT!!! - rename the PC36IMG.zip on your sdcard: - plug your phone into a usb port on your desktop and do:
6. Code:
7. adb shell mv /sdcard/PC36IMG.zip /sdcard/root-PC36IMG.zip
8. RECOVERY INSTRUCTIONS: - Extract the evorecovery.zip to your desktop - plug your phone into a usb port on your desktop - In a shell:
9. Code:
10. adb reboot recovery
11. - this will reboot your EVO into recovery mode. at this point turn your attention to the directory u extracted the evorecovery.zip to.
12. Code:
13. For Windows XP ~~> Run recovery-windows.bat at this point turn your attention to the phone and navigate to create a Nandriod Backup. you can now flash custom roms, write, and make changes to system. - to flash a custom rom put the rom on the root of your sdcard. wipe data, dalvic cache and chose the option to flash update.zip from sdcard. RECOVERY NAVIGATION: - Code: Volume up/down moves through the list and Power selects.
After entering recovery.
1. Select wipe and press the power button
2. On the next menu select wipe data/factory reset. After that finishes also wipe Dalvik-cache. Then select return.
3. Scroll down to Flash zip from sdcard and select Supersonic_1.32.651.1_rooted.zip and hit the power button.
4. Reboot device after update.zip completes.
Wap Programming
1. Run the EVO.Bat file once that completes the device will reset.
2. After reset you will get a prompt hit always allow.
3. In the application’s drawer run the WifiTether Program, press the green start tethering icon and hit always allow in the popup window.
4. Hit the green tethering icon again to stop tethering and hit always allow.
5. Restart your device 6. Enjoy Your Talk, Text, and Full web evo. here is the link [hide-thanks] [Only registered and activated users can see links. ] [/hide-thanks] My solution does contain U2nl which was compiled by to0 without his work on android none of the android solutions would be possible.
password is: omgevooncricket