Join Today













Site Sponsor
Results 1 to 4 of 4
  1. #1
    Apprentice
    Join Date
    Jun 2010
    Posts
    62
    Rep Power
    120

    Default CDMA Workshop 3.5 latest version flashing Blackberries HOWTO

    Something similar may be posted but this is my own howto I figured the menus out on my own

    MANUAL PROGRAM CODES

    ##000000 send button -- NAM PROGRAMMING also change sid here
    SID LIST = [Only registered and activated users can see links. ]

    #4357* send button -- Gives prl and sid info

    LEGACY MODE FOR SERVICE BOOK TRANSFTER
    options>advanced options>service books.
    Hold ALT, and hit S/B/E/B




    USED CDMA WORKSHOP 3.5

    connect phone with desktop mgr
    choose correct com port in main click connect (This only connects to comm port)
    click read under main tab (Info should come up on left)
    click mode under main tab and offline -d
    click security tab under spc make sure spc / user lock is set to default (nv_read)
    type spc code 000000
    click spc button and send 000000
    go to other tab under prl section click write browse to prl click ok
    in nam programming program min and dir_number accordingly or ##000000 to program nam from phone
    from main click mode then reset

  2. #2
    ?LOST? whitey10tc's Avatar
    Join Date
    Jan 2010
    Location
    Sandy, Utah, United States
    Age
    50
    Posts
    1,701
    Rep Power
    880

    Default

    Quote Originally Posted by decadude View Post
    Something similar may be posted but this is my own howto I figured the menus out on my own

    MANUAL PROGRAM CODES

    ##000000 send button -- NAM PROGRAMMING also change sid here
    SID LIST = [Only registered and activated users can see links. ]

    #4357* send button -- Gives prl and sid info

    LEGACY MODE FOR SERVICE BOOK TRANSFTER
    options>advanced options>service books.
    Hold ALT, and hit S/B/E/B




    USED CDMA WORKSHOP 3.5

    connect phone with desktop mgr
    choose correct com port in main click connect (This only connects to comm port)
    click read under main tab (Info should come up on left)
    click mode under main tab and offline -d
    click security tab under spc make sure spc / user lock is set to default (nv_read)
    type spc code 000000
    click spc button and send 000000
    go to other tab under prl section click write browse to prl click ok
    in nam programming program min and dir_number accordingly or ##000000 to program nam from phone
    from main click mode then reset
    Moved to the Blackberry forum. Please review the posted rules, posts in the incorrect forums will be deleted. 2nd warning.

  3. #3
    Apprentice
    Join Date
    Jun 2010
    Posts
    62
    Rep Power
    120

    Default

    Sorry I notified Dex on this he is who referred me to the forums, I realized it after I posted and was like DOh

  4. #4
    Apprentice
    Join Date
    Jun 2010
    Posts
    62
    Rep Power
    120

    Default

    I left this part out in the earlier

    you will want to get service books and upload them to the phone via blackberry desktop manager tutorials are out there i want to make this cdma workshop only to get evdo enabled and web working on the phone after you upload service books do the following this costed me some valuable time today figuring out but may save some some time

    EVDO

    go EVDO TaB
    write [Only registered and activated users can see links. ] in PPP User,HDR User, HDR user and PAP user
    password will be cricket for all
    for revision just select automatic
    switch IP Behaviour to SIMPLE IP


 

Similar Threads

  1. Moved>>> Using qxdm and qpst to flash blackberries HOWTO
    By decadude in forum Flashing Blackberries to Cricket
    Replies: 3
    Last Post: 04-19-2014, 03:54 PM
  2. CDMA Workshop
    By Pac3comm1 in forum CDMA Flashing Software
    Replies: 4
    Last Post: 07-07-2010, 10:37 AM
  3. connecting to treo 700w with cdma workshop (paid version)
    By THX1138 in forum Palm Flashing Software
    Replies: 1
    Last Post: 05-21-2010, 10:39 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •