Join Today













Site Sponsor
Results 1 to 6 of 6
  1. #1
    Premium Member
    Join Date
    Jan 2010
    Location
    Virginia Beach, Virginia, United States
    Posts
    267
    Rep Power
    186

    Default Palm Pre/BB/Hero/Moment and other Smartphone Settings for PP

    These have all worked for the Palm Pre, BB, Hero, and Samsung Moment to get full internet on Page Plus. Special thanks to younggunna23 for his helpful post on HoFo.

    1) Read phone with Service Programming (QPST)

    2) Under MIP tab set phone to SIMPLE IP behavior.

    3) Edit Profile 1 (not Profile 0) and only that one. Change the NAI to [Only registered and activated users can see links. ] (sets provisioning)

    4)Enable and Edit Profile 2 this is where you input our settings
    User Profile 2

    Profile Enabled: yes
    NAI: [Only registered and activated users can see links. ]
    Tethered NAI: [Only registered and activated users can see links. ] (NOTE: This resets to myphonenumber after every write)
    Rev Tunnel Preferred: yes
    Home address: 0.0.0.0
    Primary HA address: 255.255.255.255
    Seconday HA address: 255.255.255.255
    MN-HA SPI: 12C
    MN-AAA SPI: 2
    DMU Public Key ID: 10
    DMU Mobile Authenticator: (empty)
    HA Shared Secret: (empty)
    AAA Shared Secret: (empty)
    Active User Profile: 2 (this appears to reset to 0 after every write)

    5) Go to PPP tab, change username and password to [Only registered and activated users can see links. ] pw vzw for both UM/AN sections
    (repeat writes on this may be required for it to stick)

    6) Go to ROAM tab, write your PRL..


    Obviously, this is not a complete guide just the internet setup to get these phones correctly functioning on PP. With the BB, you will have to have a custom service book. There is a copy of one on HOFO.
    To simply seek is overrated. That's why you have search.

  2. #2
    Newb
    Join Date
    Feb 2010
    Posts
    19
    Rep Power
    0

    Default

    Quote Originally Posted by meanngreen04 View Post
    These have all worked for the Palm Pre, BB, Hero, and Samsung Moment to get full internet on Page Plus. Special thanks to younggunna23 for his helpful post on HoFo.

    1) Read phone with Service Programming (QPST)

    2) Under MIP tab set phone to SIMPLE IP behavior.

    3) Edit Profile 1 (not Profile 0) and only that one. Change the NAI to [Only registered and activated users can see links. ] (sets provisioning)

    4)Enable and Edit Profile 2 this is where you input our settings
    User Profile 2

    Profile Enabled: yes
    NAI: [Only registered and activated users can see links. ]
    Tethered NAI: [Only registered and activated users can see links. ] (NOTE: This resets to myphonenumber after every write)
    Rev Tunnel Preferred: yes
    Home address: 0.0.0.0
    Primary HA address: 255.255.255.255
    Seconday HA address: 255.255.255.255
    MN-HA SPI: 12C
    MN-AAA SPI: 2
    DMU Public Key ID: 10
    DMU Mobile Authenticator: (empty)
    HA Shared Secret: (empty)
    AAA Shared Secret: (empty)
    Active User Profile: 2 (this appears to reset to 0 after every write)

    5) Go to PPP tab, change username and password to [Only registered and activated users can see links. ] pw vzw for both UM/AN sections
    (repeat writes on this may be required for it to stick)

    6) Go to ROAM tab, write your PRL..


    Obviously, this is not a complete guide just the internet setup to get these phones correctly functioning on PP. With the BB, you will have to have a custom service book. There is a copy of one on HOFO.
    did all this and AN sections is resetting.. another thing.. do i put pw vzw in the password section or just vzw..

  3. #3
    BANNED
    Join Date
    May 2010
    Posts
    7
    Rep Power
    0

    Default

    just put vzw in the password section.

  4. #4
    Newb
    Join Date
    Feb 2010
    Posts
    19
    Rep Power
    0

    Default

    Ok.. Did that but UM/AN sections.. AN sections keep resetting but to sprint... one more thing.. where u have [Only registered and activated users can see links. ] i replace myphonenumber with my mobile number... right
    Last edited by antivirus1; 05-11-2010 at 03:53 PM.

  5. #5
    Premium Member
    Join Date
    Feb 2010
    Location
    Ventura, CA
    Age
    48
    Posts
    145
    Rep Power
    62

    Default

    Quote Originally Posted by antivirus1 View Post
    Ok.. Did that but UM/AN sections.. AN sections keep resetting but to sprint... one more thing.. where u have [Only registered and activated users can see links. ] i replace myphonenumber with my mobile number... right

    yes, put in your 10 digit number

  6. #6
    Newb
    Join Date
    Nov 2010
    Posts
    1
    Rep Power
    0

    Default

    no word on the an section reverting back to sprint? I too have the same problem


 

Similar Threads

  1. HTC Hero PST settings!!(Data Settings for Cricket)to get WEB to work
    By bigglou23 in forum Flashing Android to Metro PCS
    Replies: 18
    Last Post: 12-27-2011, 07:32 AM
  2. HTC Hero PST settings!!(Data Settings for Cricket)to get WEB to work
    By bigglou23 in forum Flashing Android to Metro PCS
    Replies: 46
    Last Post: 05-27-2011, 01:04 AM
  3. Replies: 55
    Last Post: 12-02-2010, 10:58 AM
  4. The new Blackberry/Palm/misc. smartphone ban on Page Plus What works/doesn't.
    By identified800 in forum Page Plus Billing/Rumors/New Products
    Replies: 1
    Last Post: 08-19-2010, 11:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •