Samsung Moment Diag and Basic Flash (ANOTHER METHOD)

[lj27416]

Here is another way to basic flash the Samsung Moment.
What you will need:


a) CDMA Workshop (haven't tried it on the cracked version, registered is recommended)

b)Samsung Moment Android Drivers (Download [Only registered and activated users can see links. ])
[Only registered and activated users can see links. ] Drivers are useful too.



Here it is:

(Install drivers but Do not plug in phone yet)

1)Turn off your phone and press [send + center button + pwr] (in that order).

2)Hold them down untill you see a Selft Test Menu.

3) With the center trackpad, slide down and select option 12. (USB)

4)USB Test Menu will open. You will see 2 options: Highlight the second option (down key) PHONE............(0)

5)Make sure the second option is highlighted, Connect the usb cable now.

6)If the drivers had not been previously installed wait till they install.

7)Once that is done. Connect with CDMAWS. Go to the Security Tab and in the 16 digit password section, send the "Samsung Default Password" and the SPC will be revealed.

8)Change the SPC to zeros "000000" (or whatever u want)

9) Write your prl, and evdo settings.

10)Go to Main Tab and click "Mode Reset"

11)Done.

For Wap, follow the HTC Hero Wap Procedure.


Enjoy! and click Thanks button!

[qwestmogul]

After endless search on the simplest way to put the phone on diag mode so that I could use CDMA and also QPST,you are the one who has offered the simplest solution,for that please accept my sincere appreciation

[meanngreen04]

Just go to wireless connections and turn on Dial Up Networking...this should make the modem drivers visible in cdma workshop.

[oriax123]

hmmm seems easy bu is it?

[lj27416]

Some moments i've gotten don't have that option.
However my method works on all.

[hectorgg17]

very very ussefully, thanks a lot, my phone don´t enter in oder mode, only this helpme, thank you againt.