Novotel 4510L stuck in download mode

[jwynegar]

Not from a mifi device although the internal menus let you do quite a bit

elisa191

So I Think What Bricked This One Is When I Tried To Restore NV Items To It What Is The Proper Way To Restore Those From A Backup In DFS

[elisa191]

So I Think What Bricked This One Is When I Tried To Restore NV Items To It What Is The Proper Way To Restore Those From A Backup In DFS

Well I don't usually "RESTORE" them that way

When restoring a device I usually run new firmware on it because I do things that can corrupt the firmware but not the NV's. If I were going to do something that could corrupt the NV files like we used to do on the 2200 to change the MEID's I would back up the NV's on that device and save them so I could write them back to the device in the event I screwed something up.

Doing this always worked.

What didn't always work was when I screwed up a 2200 and then pulled the NV's from ANOTHER 2200 and wrote them to the one I screwed up.

Most of the time I would end up with a Brick.

Thats why I started backing them up off the device BEFORE messing with it.

I know DFS includes some standered NV sets you can download from their servers you can try them.

Hope this helps

elisa191

[elisa191]

So I Think What Bricked This One Is When I Tried To Restore NV Items To It What Is The Proper Way To Restore Those From A Backup In DFS

Sorry I didn't answer your question in the last post

To restore the NV items to a device in DFS

1 - connect to the 4510 status port

2 - on the DFS menus click on NV

3 - on the right side of the screen make sure your in your local folder not their server

4 - then on the upper right side click on Import and select your backup NV Set

5 - Now you will see your Backup NV Set in the LOCAL NV List in DFS

6 - Click your Backup NV Set in the LOCAL NV List in DFS and all the NV's will load into the NV Screen in the middle of DFS

7 - Now click Wright Range at the top of DFS

8 - Pray

9 - Reboot device

10 - See if it works

hope this helps

elisa191

[JaiFar1996]

Why so much work? Lol I just run the DUU
and then flash it

[jwynegar]

I Got The MiFi Out Of Download Mode But Now I Dont Know The SPC Is There Anyway To Read It And Also Even After Using DUU Its Not Coming On Fully

[elisa191]

Why so much work? Lol I just run the DUU
and then flash it

I wasn't talking about FLASHING the device this is how you RESTORE THE NV FILES on the device

Completely different things hence it is different then how you flash them