Treo 800w

[kc720]

**Mod Edit**
Non working links removed.
***********

Treo 800w Full Falsh - Thanks to tonycortes (a.k.a. supernine) for doing this amazing solution.

First you will need to get all of the files form the link below:
**Link removed**

Cricket 800w solution
BY SUPERNINE
Credits: Beezlewaxin for great drivers, Randomwit for great CAB ideas.

0) Before anything, I recommend executing a hard reset to avoid any issues (##RTN#)

1) Place phone in DIAG PASSTHRU by dialing ##3424#

2) Connect phone via USB cable

3) Instal Beezle's Treo DIAG drivers for the new hardware detected

4) Retrieve SPC from memory read at the following address:
Address: 0x00790000-007A0000

5) After retrieving SPC, set it to zeros using CDMA Workshop. Also load your PRL.

6) Using NV Items Write feature under memory tab, apply the IOTA Bypass (800W_IOTA_Bypass.txt)

7) Then using the Authentication feature under EVDO tab, edit fields to match:

Username: [Only registered and activated users can see links. ]
Password: cricket
IP Behaviour: Simple IP
Active: 0

8) Perform a mode reset, phone will not reboot, just radio.

9) After mode reset, make sure you disable DIAG PASSTHRU and transfer the provided CAB (CKT800W[S9]) via ActiveSync

10) Using File Explorer, launch the CAB, accept any warning or prompts. After it successfully installs, it will ask to reboot device.

11) Once phone is rebooted, your device is ready to use. First time use of WAP will ask for username (phonenumber@mycricket.com) and password (cricket). And if you wish, remove the Sprint contact in the phonebook.

12) Enjoy the fully flashed phone with EVDO, WAP, and MMS.


Palm Centro IOTA + Provisioning Bypass - Thanks to insanecain for doing this solution. This was a long awaited one for many. All my other carrier Centro solutions are based off this.

First get the file from the link below:
**Link Removed**
Now just use CDMA Workshop to write these nv items to your device under the "Memory" tab.

Next, you will need to make sure that your "NAM" and "EVDO" tabs are programmed correctly.

[funkkkiii]

hi can you plz update file link ........is not working .......... thanx

[bigglou23]

here u go: [Only registered and activated users can see links. ] all my links work

[thenoblemobile]

Is there any other way to write NV items to treo 800w without cdma workshop? I have the iota fix, and I have a fully flashed treo 800w to take nv items off of, but cdma workshop server is either down or i am missing something. Any ideas on writing the nv items with qpst or cdma workshop 2.7? Im struggling here.

[whitey10tc]

Is there any other way to write NV items to treo 800w without cdma workshop? I have the iota fix, and I have a fully flashed treo 800w to take nv items off of, but cdma workshop server is either down or i am missing something. Any ideas on writing the nv items with qpst or cdma workshop 2.7? Im struggling here.

Have you tried WS 2.7 I use it all the time to write NV's back to the phone after editing.

[thenoblemobile]

Thats what I thought to, but 2.7 didnt like it, but i took your adviceon using 2.7. I read the NV from my flashed 800, and then compared it to the NV items in the ckt800iota file, and made sure they were identical. I think the ne reason 2.7 didnt like the regular ckt800iota file is because their were only 28 items and they were not all in a row. So i ended up reading/writing 69 items. thx1