Join Today













Site Sponsor
Page 1 of 4 1234 LastLast
Results 1 to 6 of 24
  1. #1
    Premium Member bigglou23's Avatar
    Join Date
    Jan 2010
    Location
    Colorado
    Age
    49
    Posts
    342
    Rep Power
    1459

    Default Treo 800w full flash

    Treo 800w Full Falsh - Thanks to tonycortes (a.k.a. supernine) for doing this amazing solution.

    First you will need to get all of the files from the link below:


    [hide-thanks][Only registered and activated users can see links. ][/hide-thanks]


    Then just follow the guide that is included with the files. Below is a copy of that guide.

    Cricket 800w solution
    BY SUPERNINE
    Credits: Beezlewaxin for great drivers, Randomwit for great CAB ideas.

    0) Before anything, I recommend executing a hard reset to avoid any issues (##RTN#)

    1) Place phone in DIAG PASSTHRU by dialing ##3424#

    2) Connect phone via USB cable

    3) Instal Beezle's Treo DIAG drivers for the new hardware detected: [Only registered and activated users can see links. ]



    4) Retrieve SPC from memory read at the following address:
    Address: 0x00790000-007A0000

    5) After retrieving SPC, set it to zeros using CDMA Workshop. Also load your PRL.

    6) Using NV Items Write feature under memory tab, apply the IOTA Bypass (800W_IOTA_Bypass.txt)

    7) Then using the Authentication feature under EVDO tab, edit fields to match:

    Username: [Only registered and activated users can see links. ]
    Password: cricket
    IP Behaviour: Simple IP
    Active: 0

    8) Perform a mode reset, phone will not reboot, just radio.

    9) After mode reset, make sure you disable DIAG PASSTHRU and transfer the provided CAB (CKT800W[S9]) via ActiveSync

    10) Using File Explorer, launch the CAB, accept any warning or prompts. After it successfully installs, it will ask to reboot device.

    11) Once phone is rebooted, your device is ready to use. First time use of WAP will ask for username (phonenumber@mycricket.com) and password (cricket).
    And if you wish, remove the Sprint contact in the phonebook.

    12) Enjoy the fully flashed phone with EVDO, WAP, and MMS.


    Palm Centro IOTA + Provisioning Bypass - Thanks to insanecain for doing this solution. This was a long awaited one for many. All my other carrier
    Centro solutions are based off this.

    First get the file from the link below:
    [Only registered and activated users can see links. ]

    Now just use CDMA Workshop to write these nv items to your device under the "Memory" tab.

    Next, you will need to make sure that your "NAM" and "EVDO" tabs are programmed correctly.
    Last edited by bigglou23; 04-27-2010 at 01:43 PM.

  2. #2
    Apprentice
    Join Date
    Feb 2010
    Location
    denver
    Posts
    28
    Rep Power
    0

    Default

    you can buy the newest version from [Only registered and activated users can see links. ] its like $107. Really useful tool or you can download the crack version 2.7
    [Only registered and activated users can see links. ] posted by DEX.
    Last edited by pluckyducky; 02-20-2010 at 12:48 AM.

  3. #3
    Newb
    Join Date
    May 2010
    Posts
    1
    Rep Power
    0

    Default

    Im trying to install the cab to my treo 800w and im keep getting an error that the cab cannot be installed (try installing a different location!!)

    What i am doing wrong???

    Thank You!!!

  4. #4
    Newb
    Join Date
    Aug 2010
    Posts
    1
    Rep Power
    0

    Default

    how can i install the driver to my pc so cdma workshop (2.7) will connect to my treo 800w . when i try to connect my treo 800w to workshop i get phone is not connected to com port or com port dose not exist.

  5. #5
    Premium Member Wrecked Johnson's Avatar
    Join Date
    Mar 2010
    Location
    Bogata Columbia
    Posts
    426
    Rep Power
    254

    Default

    Quote Originally Posted by interceptor93 View Post
    Im trying to install the cab to my treo 800w and im keep getting an error that the cab cannot be installed (try installing a different location!!)

    What i am doing wrong???

    Thank You!!!
    Try installing the cab to the device, if that dont work try the memory card, if that dont work look for a new cab file yours might be corrupt

  6. #6
    Premium Member Wrecked Johnson's Avatar
    Join Date
    Mar 2010
    Location
    Bogata Columbia
    Posts
    426
    Rep Power
    254

    Default

    Quote Originally Posted by f150xlt View Post
    how can i install the driver to my pc so cdma workshop (2.7) will connect to my treo 800w . when i try to connect my treo 800w to workshop i get phone is not connected to com port or com port dose not exist.
    If you already have the drivers for the phone all you need to do is put the phone in diag mode then connect the phone it should look for the drivers right away and you will most likely have to browse to the folder and pick which drivers to install.


 
Page 1 of 4 1234 LastLast

Similar Threads

  1. Treo 800w
    By kc720 in forum Flashing Palms to Cricket Help
    Replies: 21
    Last Post: 11-30-2011, 03:21 PM
  2. palm treo pro full flash, wap and mms guide
    By kc720 in forum General Disscusion
    Replies: 6
    Last Post: 04-21-2010, 01:31 PM
  3. Palm Treo Full flash
    By thesmitty68521 in forum Palm Flashing Software
    Replies: 4
    Last Post: 02-25-2010, 04:57 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •