Full Flash U340 to cricket

[thesmitty68521]

This was provided by Amoamare from Hofo and M-F.

To write the bin to the phone put the phone in emergency mode and choose emergency mode on the software write. Make sure to use the VZW U340 dll and Select Emergency + EFS on the SW tab

E-Mode = 9 +PWR

If it is a Verizon phone then write the ESN back to it using the CDMA Workshop and the Samsung Default password.

1. Type in 47*68#13580
2. type 001 to suspend the phone
3. Type in 013 "Channel" will appear. Type in 0925
4. Type 031 "MRU2 table" will appear. Type in 210925 press ok
5. Enter 120 "QBoot" will appear. Press 0 and then press OK
6. Enter 073 and the phone will reset.

[Only registered and activated users can see links. ]

[ownmart]

This was provided by Amoamare from Hofo and M-F.

To write the bin to the phone put the phone in emergency mode and choose emergency mode on the software write. Make sure to use the VZW U340 dll and Select Emergency + EFS on the SW tab

E-Mode = 9 +PWR

If it is a Verizon phone then write the ESN back to it using the CDMA Workshop and the Samsung Default password.

1. Type in 47*68#13580
2. type 001 to suspend the phone
3. Type in 013 "Channel" will appear. Type in 0925
4. Type 031 "MRU2 table" will appear. Type in 210925 press ok
5. Enter 120 "QBoot" will appear. Press 0 and then press OK
6. Enter 073 and the phone will reset.

[Only registered and activated users can see links. ]

from what I noticed
3. Type in 013 "Channel" will appear. Type in 0925
needs to be changed to 3. Type in 013 "Channel" will appear. Type in 0925#


After this you will need to NAM program ##NAM*
SPC will either be 000000 or 333333
Change MIN and MDN, and Home SID

[bawanyh]

hey smitty after we do the first step do we have to do #1200 and then ok?

[ilostjames]

i just want to know what do i change my MIN and MDN, and Home SID too

[Wrecked Johnson]

i just want to know what do i change my MIN and MDN, and Home SID too

When you program your MIN use your MIN, when you program your MDN use your MDN and then program your SID to your SID that should get it

[ilostjames]

When you program your MIN use your MIN, when you program your MDN use your MDN and then program your SID to your SID that should get it

i did do all tht an it still say initial programming needed