spc reads

[Dex]

the problem is ur not using custom for the addy thats the onlyway u can select the bytes in length also notice that u have to give a ending addy and a length in bytes

[Zacholley]

Ok I will post exactly what I am doing step by step I must be doing something wrong because it still wont work.

Open WS
Click Com port my phone is on.
click read to make sure it pulls up my phones info
click security
under the spc section click the drop down and select universal ram method
click read
choose address pops up and lets me input into the first box which i try like 01DE
then there is a colon : and a grey box with 0000 that i cannot edit to put in the following address
then below that there is bytes 65536
then below that a drop down that i leave at custom

any pointers with this info???

[cell_dude5]

never mind I got it just use cdma WS and choose universal ram method and in custom put start add: 0363 and end add:0365 and read it. It will give you the SPC. It worked for me.

Was this the Sprint or Boost version of the Incognito?

[ecneics]

I just did a flash on a Katana LX that gave me some issues and I thought I'd share in case someone else has these issues. When I scanned the included preset I got no codes. When I used the additional presets I've found on here the phone would stop responding when it hit certain ranges. I had the allow it to scan and error out then skip ranges until it stopped. Eventually I reached a range that gave me 6 codes. The right one was at 023E:B8CB, 023F:3F7B, and 023F:41E7. A scan between 033E and 023F did not cause the phone to reset, so that would seem to be a safe range to add in your presets.

[ecneics]

The pro-700 has given me one result with the spc every single time with 0232-0233. Saved me a lot of time when I had 20 to do.

Thought it might help someone else some.

[wichi]

I want the SPC on Sanyo Pro700. But I Can't put the ending adress given by you in Workshop. Please help me