Join Today













Site Sponsor
Page 1 of 2 12 LastLast
Results 1 to 6 of 7

Hybrid View

  1. #1
    Premium Member bigglou23's Avatar
    Join Date
    Jan 2010
    Location
    Colorado
    Age
    49
    Posts
    342
    Rep Power
    1459

    Default Nam manual programming codes

    [Only registered and activated users can see links. ]

  2. #2
    BABY NEWB Dex's Avatar
    Join Date
    Jan 2010
    Location
    CDMAGurus.com
    Posts
    700
    Rep Power
    539

    Default Re: Nam manual programming codes

    Here is the same codes just pasted here for easier access

    <<SAMSUNG>>

    Samsung sph-n240, n400, a460, a500, etc Nam Programming :

    Nam Set: ##Spc

    Test Mode: 47*869#1235

    Debug Menu: ##33284,ok

    Service Menu: Menu+8+0 (#889)

    Reset (Life time, Clear Memory, etc): ##786,ok

    A-key: ##2539,ok

    Label Selection: ##3882,ok

    Label(Home, Work, etc) : **523,ok

    NGG Setting (Gateway, etc.): ##2769737,ok

    Vocoder: ##8626337,ok

    CAI Change: ##7738,ok

    Enable TTY: ##889,ok



    Samsung a530, a610, a620, a660, a670, etc Nam Programming :

    Nam Set: Menu, 6, *

    Nam Set: ##3238, ok

    Nam Set: ##SPC (##000000), ok

    Service Menu: Menu, 9, *

    Test Mode: 47*68#13580

    Test Mode: 47*869#1235



    Samsung X, E, V, S-series (korean models), e250, v420, s350, etc Nam Programming :

    Nam Set: 6548#0**4#6

    Nam Set: 47*869#08#9

    Nam Set: 74153697193

    Test Mode: 5809540*45680 (88 - EFS reset)

    Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415

    Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415

    Debug Menu: Home(top of keypad)+0, 6725 or 9720 or 1973 or 0415



    Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming :

    Nam Set: 47*869#08#9

    Nam Set: Menu+60

    Test Mode: *759#813580

    Test Mode: 5809540*45680

    A-key: Menu+0, 25##

    External Audio: Menu+0, ####

    Debug Menu: Menu+8, 0415 or Spc

    Debug Menu: Menu+9, 0415 or Spc

    Brief NAM Programing: Menu+40,626 (not all version)

    LCD Contrast: Menu+45 (not all version)

    SIO Mode: Menu+49

    SIO Mode: Menu+69



    Samsung N356 (India version) Nam Programming :

    Test Mode: Menu, 5, down arrow, *

    Test Mode: **00## (in some flashes)



    Samsung i700, etc Nam Programming :

    Nam Set: Go to start and select "PHONE" from the drop down menu, dial #83587


    Samsung i300, etc Nam Programming :

    1. Tap on the Phone Icon with stylus
    2. Press #907*9#0 ENTER LOCK should appear on screen
    3. Enter OTKSL
    4. SVC MENU will appear press 1
    5. Enter 10 digit MIN and then press SAVE
    6. Press SAVE again
    7. Press 3 and then press SAVE 6 times
    8. Enter the HOME SID and press SAVE once
    9. Press END key twice











    <<KYOCERA>>

    Kyocera 2345, 3035, 5135, 6035, Se47, KX, KE - series, etc Nam Programming :

    Nam Set: 111111+Jog Dial(Ok)

    CAI Change: ##7738,ok

    Enable TTY: ##889,ok

    Life Timer: ##786,ok

    A-key: ##2539,ok



    Tips:

    On some kyocera handsets the factory service module has not been disabled

    and the phone can be programmed without the Spc by inputting:

    Nam Set: ##333333 menu (service)


    Cricket Kyocera phones : 111111 >Menu>Service Later models ##626*



    Qualcomm qcp-800 Nam Pogramming :

    Nam Set: Menu+3+0+Spc

    Field Test: Menu+7+0+Fsc







    <<SANYO>>

    Sanyo 4900, 5150, 5300, 8100, etc Nam Programming :

    Nam Set: ##Spc+Ok+Key Down+Ok

    Advanced Setup: ##3282+Ok+Key Down+Ok+Msl

    A-key: ##2539+Ok+Key Down+Ok

    Version: ##**837+Ok+Key Down+Ok

    Debug Menu: ##FSC+Ok+Key Down+Ok

    Airtime menu: ##8463+Ok+Key Down+Ok

    Change CAI: ##7738+Ok+Key Down+Ok

    Vocoder: ##8626337+Ok+Key Down+Ok

    Reverse Logistic: ##786+Ok+Key Down+Ok

    Set IP Address: ##2769737+Ok+Key Down+Ok

    TTY On/Off: ##889+Ok+Key Down+Ok

    Ready Link: ##4636+Ok+Key Down+Ok

    Browser Init On/Off: ##4682+Ok+Key Down+Ok

    Picture Token: ##25327+Ok+Key Down+Ok

    Unknown Code: ##5282277+Ok+Key Down+Ok

    (SPC=000000, FSC=040793)



    Sanyo scp-A011, smp-A017, etc Nam Programming :

    Nam Set: F9(3 beep) + 0*72696#767







    <<AUDIOVOX / UTSTARCOM>>

    Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming :

    Power the phone ON and wait until the little light on top goes out, then press:

    Nam Set: 289,Fcn, #,1

    Service menu: Fcn,0,0, FSC



    Power the phone ON and press:

    Test Mode: Hold (2,*,Rcl) + Power



    Test Mode Commands:

    99 - download - flash phone
    124 - inam data write
    125 - version
    126 - get ESN
    127 - get SPC
    128 - get User lock

    129 - is WFTV data write
    137 - get FSC code
    138 - NPcode (nam program code)
    139 - dscode
    141 - restart
    218 - Read_Addr
    000 - is cdma mode
    001 - is fm mode
    002 - is pcs mode
    008 - is reg read addr
    020 - is lna_range



    Audiovox (Hyundai) cdm-100, 130, 135, 8300, 8500, 8600, 8910, etc Nam Programming :

    Nam Set: ##20022002, end

    Read user lock: #5625*, end

    Port settings: ##7678, end

    DM baud rate: ##2283, end

    DM mode enable: **1004, end

    DS mode enable: **1005, end

    Misc. Test: ##27752345, end

    S/W Test1: ##27732726, end

    S/W Test2: ##2240, end

    Debug screen: ##2773, end

    Clear MRU: ##6782, end

    Rfnu_Contents: ##2250, end

    ?????: ##1133, end

    ?????: ##1144, end

    P_Rev: ##7738, end

    GPS Test: ##4771, end

    A-Key: 2538**

    SMS Eng: ##767364, end

    Battery_adc: ##2768, end

    Tests: ##1122, end



    Audiovox 8610, 8910, etc Nam programming :

    Name Set: ##847446, end, 111111

    Cricket 8910: 20022002+end



    Audiovox pcx-3500xl Nam Programming :

    Nam Set: ##2726+Send+1998+1+Spc+1



    Audiovox-107 Nam Programming :

    Nam Set: 45680*47*869#1



    Audiovox CMP-3 Nam Programming :

    Nam Set: 45680*47*869#1

    Dm Mode: Menu, 6, 6



    Audiovox 9950 Nam Programming :

    Nam Set: ##3282



    Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming :

    Nam Set: m + # + envelope key + * + 1



    Audiovox Thera (Toshiba 2032) Nam Programming :

    Thera Nam Programming User Manual - nam_thera.pdf



    Audiovox (UTStarcom) PPC 6600, 6700, etc Nam Programming :

    Nam Set: ##778+ Send

    Nam Set: #*#SPC + Send

    Nam Set: ##778#

    DM mode: ##3424 + Send

    DM mode: #*#3424 + Send

    DM mode: ##3424#

    Programming User Manual - programming_instructions.pdf



    UTStarcom TXT 8010 Nam Programming :

    DM mode enable: *#6870

    DM mode disable: *#6871







    <<MOTOROLA>>

    Motorola 7760, 7860, 2260, 8160, etc Nam Programming :

    Nam Set: Fcn,0000000000000, Rcl

    Nam Set: 74663#, Fcn, Fcn

    Test Mode: Fcn, 00**83786633, Sto



    Motorola v60c, v120c etc Nam Programming :

    Nam Set: 74663#, Menu, Menu, Spc

    Nam Set: Menu, 073887, * (type quickly)

    Test Mode: Menu, 073887*, Spc

    Debug Mode: ##33284



    Force the phone into DIGITAL ONLY mode:

    1) ##33284 (Debug)

    2) RIGHT Softkey (Next) Twice

    3) Down arrow 10 times to "PrefMod"

    4) RIGHT Softkey (Change) until you see "DigOnly"

    5) LEFT softkey (Exit)

    6) MENU then LEFT Softkey return to idle screen

    7) ##33284 (The last 4 will not display if you have done it correctly)



    Motorola Razr V3C Nam Programming:

    Nam Set: 74663 # clr clr

    Nam Set: #073887* , then SPC



    Motorola Q Nam Programming:

    Nam Set: [Send] + 074663 + [Send] + [Send], Selecct NAM#
    Service programing: ##073887* +Send

    Newer VZW Motorolas: ##PROGRAM + Send

    Motorola t182, c210, etc Nam Programming :

    Nam Set: ##298645665, end

    Short Nam: ##073887, sto

    Debug Menu: ##1111, end

    Service Menu: ##2222, end

    Sound NS/EC on/off switch: ##1113, end



    Motorola v710, v730, v740, ms150, etc Nam Programming :

    Nam Set: 8378*# + press 3 times NATE (spc - 071082)

    Test Mode: Menu, 073887*, Spc

    Service Menu: #758353266#646#



    Motorola StarTac 2004 Nam Programming :

    Nam Set: 5759789*#, press "Rec" button 3 times, (spc - 915037)



    Motorola ms200, ms400, ms800, etc Nam Programming :

    Nam Set: 5759789*#, press "Camera" button 3 times, (spc - 915037)

    Nam Set: 246791538*#, press "Camera" button 3 times, (spc - 915037)



    Motorola v6060 Nam Programming :

    Nam Set:147*369#456*0#





    MOTOROLA TEST MODE :



    v60, c120, c331, etc:

    1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

    2) The phone will require you to "Enter a Security Code", press 000000, OK

    3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"

    choose SELECT. Your phone is now in test mode.

    4) Signal strength is the 3_rd number down on the left hand side of the screen.

    5) To toggle between regular mode and test mode: Press MODE then

    quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

    6) To turn off the test mode the phone must be in regular mode, then follow

    the above sequence and scroll down to where it says "DISABLE" instead of

    "ENABLE" and choose select.



    Motorola Bible (old models) - bible.txt







    <<NOKIA>>

    Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming :

    Nam Set: *3001#12345#

    Software Version: *#837#

    Software Version: *#9999#

    Esn Number: *#92772689#

    Restart Phone: *#75681#

    Restart Phone: *#75682#



    Nokia 8887 Nam Programming :

    Nam Set: *3001#12345#

    Version: *#0000#

    Evrc: *#8378#

    Esn/Data/Timer: *#92772689#

    SID: *#743#



    Nokia 8587 Nam Programming :

    Nam Set: *#626#7764726#

    A-Key: #8159357022#4579# (26 digits)

    A-Key: #8159357022#4547# (20 digits)

    Version: *#0000#

    Version: *#837#

    Vocoder: *#3872#

    Change language: Menu 5, 3, 1

    Change DM mode: *#7678#

    Debug Screen: *#8378#

    Debug: *#8380#

    Field Test Menu: *#83788#



    SPC Unlock, Factory Reset :

    Full Factory Reset: *#7370#

    Resets all settings including non-user changeable items (like SPC)





    NOKIA TEST MODE:



    51xx, 61xx, 71xx, 3285, 63xx, etc :

    1) Turn on the phone. Press *3001#12345#

    2) Scroll up to where it says "Field Test" and choose SELECT

    3) Highlight "Enable" and choose OK. Turn the phone off then back on.

    4) If the test mode screen does not show up press MENU and scroll

    down to "Field Test" choose SELECT. Press 0 1 then choose OK.

    5) Lower left or upper left number is the signal strength.

    6) To turn off the test mode press MENU and scroll down to where it says

    "Field Test" choose SELECT. Press 0 0 and then choose OK.



    3360, 6360, etc :

    1) Turn on the phone. Press *3001#12345#

    2) Scroll up to where it says "Field Test" and choose SELECT

    3) Highlight "Enable" and choose OK. Turn the phone off then back on.

    4) If the test mode screen does not show up press MENU and scroll

    down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.

    5) Lower left or upper left number is the signal strength.

    6) To turn off the test mode press MENU and scroll down to where it says

    "Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.







    <<LG>>

    LG LX, VX, PM-series, VX4400, VX6000, VX8550, PM225, etc Nam Programming :

    Nam Set: ##Spc(#)

    Nam Set: Menu, 0

    Nam Set for VX8550: ##77647268550 + Send

    Advanced Settings: ##2342(#)

    Vocoder: ##8626337,ok(#)

    CAI Change: ##7738,ok(#)

    Enable TTY: ##889,ok(#)

    A-key: ##2539,ok(#)

    A-key: 2539**

    Feature: ##3328873 + Send

    Service Info: #4357*4357

    gps Air Test: #477247

    Reset (Life time, Clear Memory, etc): ##786,ok(#)

    Service Programing New LGs:##PROGRAM(model #) +send i.e. ##PROGRAM10000 +send

    lgc-300, etc Nam Programming :

    Nam Set: Menu, 9, Spc

    A-key: Press "Sto" 3sec, 2539**



    lgc-330w, etc Nam Programming :

    Nam Set: Menu, 4, 0, Spc

    A-key: 2539**



    lgc-510, v111, etc Nam Programming :

    Nam Set: Menu, 3, 0, Spc

    A-key: 2539**



    lgc-500, 800w, etc Nam Programming :

    Nam Set: Menu, 9 , 0, Spc

    Debug Mode: Menu, 7, 0, Fsc

    Debug Mode: Menu, 8, 0, Fsc

    A-key: 2539**







    <<ERICSSON / SONY-ERICSSON>>

    SonyEricsson T608, etc Nam Programming :

    Nam Set: 923885, joystick >, 111111

    Nam Set shot: 987, joystick >, 111111

    Nam Set long: 222652, joystick >, 111111

    Vocoder: ##8626337, joystick >, 111111

    Debug screen: ##33284, joystick >

    Life Timer: ##786, joystick >

    SW ver: 9#4#3#, joystick >

    Edit Profile: ##3282, joystick >

    Service menu: *#06*



    Ericsson A1228c, T61, etc Nam Programming :

    Short NAM: 987+Menu

    Long NAM: 923885+Menu+Spc

    CDMA Mode: 904093+Menu

    Analog Mode: 904095+Menu

    QNC: 904097+Menu

    Debug Screen: 904090+Menu

    DM Mode: 904050+Menu







    <<EPSILON / COMPAL>>

    Epsilon vc-5x, Compal 1100, etc Nam Programming :

    Nam Set:: **321456987##

    Short Nam: **147258963##

    Service Menu 1: **1232580##

    Service Menu 2: **078987##

    Service Menu 3: **1234756##

    Show SPC: **3214569871472365##

    Version: **1470963##

    Debug: **000000##

    A-key: 2539**

    Reset: **14789##







    <<SK TELETECH>>

    Sky All Models Nam Programming :

    Nam Set: #7583538324#626#

    Nam Set: *759#364*7388464#

    Min simple mode: #758353266#646#

    Irm simple mode #758353266#476#

    Voice memo: #8767#277#

    Test Mode: #7583538324#8378#

    A-key: #758353266#2539#

    Service Menu: Menu+4+0+Spc

    Service Menu: Menu+5+0+Spc







    <<WITHUS / MODOTTEL>>

    Withus wce-100, 200, 300, etc Nam Programming :

    Nam Set: ##948487+Save

    Nam Set: ##948482+Save

    ESN write: ##66835+Save (wce200 only)

    SMS Settings: ##76766

    NVM Rebuild: ##777464







    <<GTRAN>>

    Gtran gcp-2000 Nam Programming :

    Nam Set: 01#737+Spc

    Debug Menu: 01#324+Spc

    Debug Mode: 01#727

    Test Mode: 01#764+Spc

    System Test Mode: 01#768+Spc



    Gtran gcp-5000 Nam Programming :

    Debug Mode: 01#727+Spc

    Test Mode: 01#765







    <<HYUNDAI>>

    Hyundai hwp-110 Nam Programming :

    Nam Set: #86904**89397#

    DM Mode: ##2740*

    (Open phone, inter code, close phone)



    Hyundai hgc-120, 130, 200 Nam Programming :

    Nam Set: #86904**89397#



    Hyundai hgc-310, 600, 610 Nam Programming :

    Nam Set: ##20022002, end, 1, Spc Code

    Field Test: ##20022002, end, 1, Master Code



    Hyundai Curitel h100, 150, hx510b, 520, etc Nam Programming :

    Nam Set: ##20022002, end, 1, Spc Code

    Field Test: ##20022002, end, 1, Master Code

    A-key: 2539**

    Debug Menu: ##27732726, end

    Sar Test: ##27752345, end

    Baud Rate: ##36**, end

    DM mode enable: **1004, end

    DS mode enable: **1005, end

    Test Bell/Voice/Led/Dot: ##1122, end

    RF Mode: ##2240, end

    Ras Ram: ##2774, end

    Cmux1: **0481, end

    Cmux2: **0482, end

    RX Mode Fax: **0492, end

    RX Mode Data: **0491, end

    RX Mode Reset: **0490, end







    <<HUAWEI>>

    Huawei ETS-668, 678, 688, etc Nam Programming :

    Debug Mode: ##44+Menu

    Debug Screen: ##33+Menu

    CDG2 Test enable: ##234+Menu

    CDG2 Test disable: ##432+Menu

    China Lang Select: ##123+Menu

    Blocking Debug Code: ###888+Menu

    Home System Only On: ##461+Menu

    Home System Only Off: ##460+Menu

    Master Code for all Huawei models is - 309296







    <<PANTECH / CURITEL>>

    Pantech hx-525b, 550, 570, 575, etc Nam Programming:

    Nam Set: ##13*92*#62* + Pwr

    Debug Mode: ##*193*762534#* + Pwr (R-UIM mode disable)

    Debug Mode: ##27732726 (R-UIM mode enable)

    DM Mode Enable: ***18*#826*

    Full Reset: ##03*934#9367*192#397#7412569746 + Pwr

    MultiTest: ##22635*262* + Pwr

    Cmux1: ***12*#811# + Pwr
    Cmux1: ***37*#922* + Pwr
    RX Mode Data: ***83*#247 + Pwr
    RX Mode Reset: ***64*#133# + Pwr
    DS Mode On: ***12045#*# + Pwr
    RF NV Init: ##0*#*63861829372# + Pwr
    RAS_RAM: ##3*13091#1279#* + Pwr







    <<TREO>>

    Palm One Treo 600, 650, 700, etc Nam Programming :

    Nam Set: ##SPC + Send

    Nam Set: #*#SPC + Send

    Nam Set: ##SPC#

    DM mode: ##3424 + Send

    DM mode: #*#3424 + Send

    DM mode: ##3424#

    Debug: ##33284

    Programming User Manual - programming_instructions.pdf

    Resetting Treo - resetting_treo650.doc







    <<BLACKBERRY>>

    BlackBerry Nam Programming :

    Nam Set: ##SPC + Send

    Service screen1: #4357* + Send

    Service screen2: hold down Alt+Shift , then press "H"







    <<AXESSTEL>>

    P800, T800, P1900, T1900, etc Nam Programming :

    Nam Set: 47*68#47*869#

    DM mode: ##9* + Send

    Data cable select: menu + 7 + 1 + #

    Data Manager: **##11

    Data (Internet): **##13

    Data USB: **##32







    <<VK MOBILE>>

    VK-100C, 110C, 200C, etc Nam Programming :

    Nam Set: 153147539741593

    Test Mode: 153147539123258 (88 - clear efs (set language to korean before))







    <<GIGA TELECOM>>

    Z510, Z710i(gcd-456) Nam Programming :

    Nam Set: Menu+0+Spc







    <<AnyDATA>>

    AMC450 Nam Programming :

    Nam Set: *74269#*748#96148063+SEL







    <<ZTE>>

    ZTE C150, C160, C170, C180, C220, etc Nam Programming:

    Nam Set: *983*3641# (R-UIM mode)

    Nam Set: #1463*389*



    ZTE C201 Nam Programming:

    Nam Set: *983*7358#







    <<UBIQUAM>>

    U100, U105, U200, U300, etc Nam Programming :

    Nam Set: ##3435871

    BREW Set Menu: ##8242739

    System Test: ##33582

    Handset Test: ##3435873

    Handset Test: ##3435875

    Factory Test Mode: ##3435874







    <<SYNERTEK>>

    Synertek S200 Nam Programming :

    Nam Set: Menu+0+Spc

    A-Key: 2539**+Save

    Test vibro/rx/tx: ##5555+Save

    Debug Screen: ##33+Save

    Debug Screen: ##523+Save

    RF Test: ####+Save

    LCD type: ##325+Save



    Synertek S500 Nam Programming :

    SAR Test Strife test: *#0000#
    Debug screen: *#8378#
    Clear LCD: *#848378#
    Debug menu: *#443336# (R-UIM mode)
    CDG , Service option: *#234#
    Function Test, LCD Contrast: *#878#







    <<SONY>>

    Sony CM-M1300, 3300, Z200 Nam Programming :

    Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc
    I am Dex's Lab of the Ohio Cricket Mafia
    Latest Exploit:
    Official Cricket TP2 and TP Rom from the Mafia
    Next Exploit:
    Palm Pixi Rom
    Quote:Pwnage is best served VIA USB Cable!!!!!!!!!

  3. #3
    Moderator on Vacation Tannus's Avatar
    Join Date
    Feb 2010
    Location
    Coeur d'Alene, Idaho, United States
    Age
    42
    Posts
    210
    Rep Power
    363

    Default

    I've certainly seen that list B4... Nice post up
    If U don't have NEthing useful 2 post, don't post NEthing @ all

  4. #4
    Premium Member
    Join Date
    Feb 2010
    Posts
    73
    Rep Power
    395

    Default

    Yeah, thats an oldie but a goodie. I used to have a list of nam programming codes for a lot of different models. Ill see if I cant find it and post it up this week.

  5. #5
    Apprentice lj27416's Avatar
    Join Date
    Feb 2010
    Age
    44
    Posts
    125
    Rep Power
    248

    Default

    other than the sites you posted already this is another alternative for nam programming codes:

    [Only registered and activated users can see links. ]

  6. #6
    Premium Member bigglou23's Avatar
    Join Date
    Jan 2010
    Location
    Colorado
    Age
    49
    Posts
    342
    Rep Power
    1459

    Default

    thats a great one, ty bro


 
Page 1 of 2 12 LastLast

Similar Threads

  1. Guide -- manual programming for ascend m860
    By rich hathaway in forum Ascend
    Replies: 7
    Last Post: 06-11-2013, 02:13 PM
  2. a455, ve465 and possibly more models RSD manual programming files
    By DankOfOwnage in forum Flashing Motorolas to Cricket help
    Replies: 2
    Last Post: 06-27-2012, 11:16 PM
  3. Programming Codes for the HTC Hero
    By Pac3comm1 in forum HTC Hero (CDMA)
    Replies: 1
    Last Post: 07-26-2010, 12:17 AM
  4. Manual Programming Motorola A455 Rival
    By love2sin in forum General Motorola Discussion
    Replies: 0
    Last Post: 06-29-2010, 11:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •