smartmazila
06-11-2012, 02:17 PM
hi there,
about month ago I already programmed NAM settings for palm pixi plus & device works well. now I have to program another pixi plus, but I've problems. I unlocked device, bypassed activation, turned on DIAG mode and programmed with two different apps QPST & DFS but phone wont turn on. "Phone offline" notification is instead carrier logo "verizon wireless". after uploading PRL phone flashes cellular reception and goes offline in seconds.
also, when I send SPC from program, it can read from phone & appears DEVICE UNLOCKED but, when I try to enter MSL code by devices dialpad, there appears error: invalid MSL
anyone can help me?
Problem Solved.
I think problem was in activating device. cause by mistake at first I programmed NAM settings & then bypassed activation :)
solving method:
1. get stock (unactivated) device
2. Activate
3. connect to qpst
4. save original nam settings to *.qcn file
5. program "phone offline" device with original settings
6. activate
7. program NAM with our carrier setting
8. reboot ;)
Admin, post can be closed.
sorry for my English & thank you.
about month ago I already programmed NAM settings for palm pixi plus & device works well. now I have to program another pixi plus, but I've problems. I unlocked device, bypassed activation, turned on DIAG mode and programmed with two different apps QPST & DFS but phone wont turn on. "Phone offline" notification is instead carrier logo "verizon wireless". after uploading PRL phone flashes cellular reception and goes offline in seconds.
also, when I send SPC from program, it can read from phone & appears DEVICE UNLOCKED but, when I try to enter MSL code by devices dialpad, there appears error: invalid MSL
anyone can help me?
Problem Solved.
I think problem was in activating device. cause by mistake at first I programmed NAM settings & then bypassed activation :)
solving method:
1. get stock (unactivated) device
2. Activate
3. connect to qpst
4. save original nam settings to *.qcn file
5. program "phone offline" device with original settings
6. activate
7. program NAM with our carrier setting
8. reboot ;)
Admin, post can be closed.
sorry for my English & thank you.