iPhone 4 Diag Mode *UNSTABLE*

[amoamare]

Prerequisites:
iPhone 4 CDMA
Jailbroken
Cydia Installed
iFunBox Latest
Computer
WiFi
Some basic knowledge.
Know how to ssh.
Know how to use HWVSP.
Know not to pm me for help cause know i will not respond.
Know this is buggy
Know you can only read the device
Download the file at the bottom.

And credits;
Beezlewaxin: Not sure where he went :S left in the middle of the project. been almost a year.

To begin
Open Cydia,
Search and Install Setup Tools.
PIX

Seach and Install OpenSSH.
PIX

Reboot Phone

Download tcp_serial_redirect.py see attachment.

Open iFunBox Browse to
-Raw File System
-private
-var
-root

Copy tcp_serial_redirect.py to /private/var/root
Right click the file click "Premissions"
set Ocatl to 0755 click ok

Click SSH Terminal Enter
easy_install pySerial
cd /private/var/root
python tcp_serial_redirect.py --spy -p /dev/tty.debug -b 115200
PIX

Open HWVSP
Put your iPhone on WIFI connection. Grab its IP
Settings
-WiFi Networks
-Connect to your wifi, click the > get IP address

My Example: 192.168.1.108
PIX

Setup HWVSP
PIX

Connect using CDMAWS.
PIX


If it doesnt read, try again
then try again.



PS I Will upload pictures soon.

PPS Cant attach files to lazy to upload to host.

[vjdup]

Disconnected
Waiting for connection on 7777...
Connected by ('192.168.1.24', 1821)

Disconnected
Waiting for connection on 7777...
Connected by ('192.168.1.24', 2395)
x00
Disconnected
Waiting for connection on 7777...
Connected by ('192.168.1.24', 2427)
x00x00x00res://C:%5CDocuments%20and%20Settings%5CAdmin%5CDesktop% 5CIPSW%5CiFunBox.exe/CUS/#207

See how the port increases each time the connection retries?......

[amoamare]

Thats because it connects on any open port

[lj27416]

python tcp_serial_redirect.py --spy -p /dev/tty.gas-gauge -b 115200

[tronoftroy]

python tcp_serial_redirect.py --spy -p /dev/tty.gas-gauge -b 115200

Not sure why you would select Gas.gauge.

but i also found out that www DOT serial-port-redirector DOT com/ works much better. with that Python Script.

though could anyone shed some light on the QC Commands for this chip? seems like alot of Commands Dont work. IE send SPC. or Offline mode.

thanks.

[hugi]

python tcp_serial_redirect.py --spy -p /dev/tty.gas-gauge -b 115200

tty.gas-gauge... basis in uim......
try only with tty.debug
basicly we can't send SPC in Cdma workshop...(always Failed)
i has try to ##626 call.. and send SPC with this device..setting MIN and MDN and than connect to PC with this tutorial
can read item Tab EVDO in cdma Workshop... but still can't write....

166

[quickfixman]

thanks for this post

[bluegatar]

I need the files!!!!!