cricketandroid
11-12-2011, 12:59 AM
1. Talk and Text
(1) Install the drivers for your device.
(2) Connect to CDMA workshop and read SPC (LG method), then write to 000000.
(3) Write the PRL of your choice.
(4) Write your MDN and MIN
If everything was done properly you will now have Talk and Text, these settings should stick
without any problem. But if something weird happens just do it again.
For the PRL I suggest trying chrisngrod's new Cricket/Sprint Hybrid PRL, since reportedly you
may be able to use talk and text in areas where flashed phones normally do not pick up. This
PRL must be written with QPST, as of yet it doesn't work with CDMA workshop.
2. Obtaining Root and Flashing Custom Recovery
If you know what are you doing, or don't want to bother with custom ROM's you can skip this part.
If you decide not to use the Cricket ROM by Error420 you will need to install the Indulge's MMS.apk,
push telephony.db, and possibly adjust the APNs.
(1) Use wifi to connect to market and download your favourite file explorer
(2) Get gingerbreak from [26.04.2011][v1.2] GingerBreak APK (root for GingerBread) - xda-developers ([Only registered and activated users can see links])
(3) Install and run gingerbreak, You should now have rooot.
Now we can flash a custom recovery in order to install the LG Optimus S Cricket rom created by error420 ([Only registered and activated users can see links])
Instructions and recovery image can be found here
All In One Recovery Thread - Android Forums
([Only registered and activated users can see links])
You will need to use flash_image in order to flash the custom recovery image, instructions and download are here
Flash image - CyanogenMod Wiki
3. Installing LG Optimus S Cricket Rom
(1) Download the ROM from here Optimus S Cricket Rom
(2) Copy it to your SD Card
(3) Boot into recovery
(4) Wipe data and dalvik cache
(5) Flash rom from SD Card
4. WAP / DATA
(1)Connect to QPST v2.7 build 323. Ignore the fact that it will say "The phone has stopped responding to read/write commands."
(2) input
UNDER M.IP TAB
* Change Active User - 0
* Change Registration Retries - 1
* Mobile IP Behaviour - Mob + Simp f/back
* Initial Registration Retry Interval - 1750ms
M.IP TAB > EDIT BOTH PROFILES TO MATCH FOLLOWING
[Only registered and activated users can see links]
* HA and AAA shared secret > Text String > cricket
* MN-HA-SPI > 12c
* MN-AAA SPI > 2
* DMU Public and DMU Mobile > 0
* Rev Tunnel Preferred > Leave Checked
* Home Address > 0.0.0.0
* Primary HA > 68.28.15.12
* Secondary HA > 68.28.31.12
* Do the same for both profiles, just in case, but uncheck profile enabled on the 2nd
UNDER PPP CONFIG TAB
> Um
[Only registered and activated users can see links]
* Password > cricket
>AN
[Only registered and activated users can see links]
* Password > cricket
(3) Write to phone and wait for reboot. You should now have 3G if your phone is
already on a $55 Android Plan. If you don't you may have missed something.
NOTE: If you go back into QPST it will revert some settings back to Sprint.
5. MMS
If your settings are correct MMS Should work when you flash the Cricket ROM
6. Optional Steps to Improve Your Experience
----------------------------------------------------------------
The following is totally optional but will improve your experience on this phone
if you decide not to mess around too much with custom roms.
(1) Install ROOT UNINSTALLER from market, and use it to remove bloatware.
(2) Download GO Launcher EX to get rid of the annoying Sprint ID icon, and have more control.
----------------------------------------------------------------------------------
CREDIT FOR THIS TUTORIAL IS AS FOLLOWS
To many to list, but some are cu.com, Ryan mogul, whitey10tc, rich hathaway.
IF I MISSED ANYONE PLEASE LET ME KNOW!!!
I take no credit for the information provided, I simply compiled modified an easy-to-follow set of instructions.
It should get you going on the cricket Android plan.
(1) Install the drivers for your device.
(2) Connect to CDMA workshop and read SPC (LG method), then write to 000000.
(3) Write the PRL of your choice.
(4) Write your MDN and MIN
If everything was done properly you will now have Talk and Text, these settings should stick
without any problem. But if something weird happens just do it again.
For the PRL I suggest trying chrisngrod's new Cricket/Sprint Hybrid PRL, since reportedly you
may be able to use talk and text in areas where flashed phones normally do not pick up. This
PRL must be written with QPST, as of yet it doesn't work with CDMA workshop.
2. Obtaining Root and Flashing Custom Recovery
If you know what are you doing, or don't want to bother with custom ROM's you can skip this part.
If you decide not to use the Cricket ROM by Error420 you will need to install the Indulge's MMS.apk,
push telephony.db, and possibly adjust the APNs.
(1) Use wifi to connect to market and download your favourite file explorer
(2) Get gingerbreak from [26.04.2011][v1.2] GingerBreak APK (root for GingerBread) - xda-developers ([Only registered and activated users can see links])
(3) Install and run gingerbreak, You should now have rooot.
Now we can flash a custom recovery in order to install the LG Optimus S Cricket rom created by error420 ([Only registered and activated users can see links])
Instructions and recovery image can be found here
All In One Recovery Thread - Android Forums
([Only registered and activated users can see links])
You will need to use flash_image in order to flash the custom recovery image, instructions and download are here
Flash image - CyanogenMod Wiki
3. Installing LG Optimus S Cricket Rom
(1) Download the ROM from here Optimus S Cricket Rom
(2) Copy it to your SD Card
(3) Boot into recovery
(4) Wipe data and dalvik cache
(5) Flash rom from SD Card
4. WAP / DATA
(1)Connect to QPST v2.7 build 323. Ignore the fact that it will say "The phone has stopped responding to read/write commands."
(2) input
UNDER M.IP TAB
* Change Active User - 0
* Change Registration Retries - 1
* Mobile IP Behaviour - Mob + Simp f/back
* Initial Registration Retry Interval - 1750ms
M.IP TAB > EDIT BOTH PROFILES TO MATCH FOLLOWING
[Only registered and activated users can see links]
* HA and AAA shared secret > Text String > cricket
* MN-HA-SPI > 12c
* MN-AAA SPI > 2
* DMU Public and DMU Mobile > 0
* Rev Tunnel Preferred > Leave Checked
* Home Address > 0.0.0.0
* Primary HA > 68.28.15.12
* Secondary HA > 68.28.31.12
* Do the same for both profiles, just in case, but uncheck profile enabled on the 2nd
UNDER PPP CONFIG TAB
> Um
[Only registered and activated users can see links]
* Password > cricket
>AN
[Only registered and activated users can see links]
* Password > cricket
(3) Write to phone and wait for reboot. You should now have 3G if your phone is
already on a $55 Android Plan. If you don't you may have missed something.
NOTE: If you go back into QPST it will revert some settings back to Sprint.
5. MMS
If your settings are correct MMS Should work when you flash the Cricket ROM
6. Optional Steps to Improve Your Experience
----------------------------------------------------------------
The following is totally optional but will improve your experience on this phone
if you decide not to mess around too much with custom roms.
(1) Install ROOT UNINSTALLER from market, and use it to remove bloatware.
(2) Download GO Launcher EX to get rid of the annoying Sprint ID icon, and have more control.
----------------------------------------------------------------------------------
CREDIT FOR THIS TUTORIAL IS AS FOLLOWS
To many to list, but some are cu.com, Ryan mogul, whitey10tc, rich hathaway.
IF I MISSED ANYONE PLEASE LET ME KNOW!!!
I take no credit for the information provided, I simply compiled modified an easy-to-follow set of instructions.
It should get you going on the cricket Android plan.