Slow 3G after changes

[Ravenouschaos]

I had gotten an evo flashed to cricket and all services were working properly, but I was getting error 67 left and right, literally whenever i tried to use any service, it would still work, but this would pop up, so I changed my setting from:

Active Profile: 1
[Only registered and activated users can see links]
SPI MN-HA: 4D2
SPI MN-AAA: 4D2
Reverse Tunnel Preffered: Enable
Home IP Adress: 0.0.0.0
Primary Home Agent: 255.255.255.255
Second Home Agent: 68.28.177.76
HA Shared Secret: ******
AAA Shared Secret: ******
DSA Server URL: [Only registered and activated users can see links]

MEID(HEX): A100000D9D7E4E
P_REV: IS-2000 (6)
SCM: 58
Slot Mode: Enable
Slot Cycle Index: 2
MCC: 310
MNC: 00
ACCOLC: 0
Vocoder: Enable
Roam Orig: Voice 13k
LBS PDE IP: <Not available>
LBS PDE Port: <Not available>
Home sys Reg: Enable
Foreign Sys Reg: Enable
Foreign NID Reg: Enable
DDTM: Disable
Home SID/NID #1: 5033/65535
MMS Server URL: [Only registered and activated users can see links]
RTSP Proxy Port: 554
RTSP Proxy Address: rtsp.vog.sprintpcs.com
HTTP PD Proxy Port: 8085
HTTP PD Proxy Address: pd.vog.sprintpcs.com

to

Active Profile:1
[Only registered and activated users can see links]
Spi MN:HA: 12c
spi mn:AAA:2
Reverse Tunel:Enable
home IP:0.0.0.0
Primary Home:68.28.15.12
Second Home:68.28.31.12
HA Shared Secret:cricket
AAA shared cricket:cricket
DSA:Leave it as it is

Slot Cycle Index:
MCC:310
MNC:00
ACCOLC:2
Vocoder:Enable
EVRC-B: Disable
Home Orig:Voice 13k
Roam Orig:Voice 13k
LBS PDE IP: Blank
LBS PDE Port: BLANK
Home Sys Reg:enable
Foreign SID reg:enable
Foreign NID Reg: Enable
MMS Server URL: [Only registered and activated users can see links]
RTSP Proxy: 8080
RTSP Proxy Address: wap.mycricket.com
HTTP PD Proxy Port: 8080
HTTP PD Proxy Address: wap.mycricket.com


as recommended on this forum. Technically everything still works, as far as I can tell, but my internet and youtube etc have slowed to a crawl. Any advice is greatly appreciated. Thank you in advance.

EDIT: ALSO, STILL GETTING ERROR 67, AND NOW ALSO 131. Mostly when i activate the hotspot.

[Playa4Life352]

Are u on a proxy flash?

[rich hathaway]

[Only registered and activated users can see links]

[Ravenouschaos]

Not sure what a proxy flash is, sorry, and my web page is set to google as well. After some closer observation the errors come up when I toggle mobile networks or wifi. Sometimes it is there when I go to unlock the phone, or when I bring up the android market. Some forums are saying this may be caused by a setting in the m.ip tab in QPTS. According to them it's because the authentification setting is set to simp+mob instead of just simp. I have qpst and the diag drivers, but does anyone know if I can edit just that setting without a full reflash? Since all services work i'd rather not mess that up, thanks for the responses.

[rich hathaway]

if your on the 60z plan you are not using a proxy,if your on the 45 dollar plan you are going thru a proxy to connect to the internet.
i have'nt used qpst to flash one because we have workshop,but i will tell you every one we have done we use mip+sip
if it were mine i would check the evdo tab w/workshop.
the updates sprint is sending is messing with alot of phones

[Ravenouschaos]

Ah, ok, no, then im not on a proxy flash. I heard the simp auth only applies to evos flashed to cricket. I will dl workshop and see what it says then get back to you, thanks.