spc motorola wx445

[luisnoel]

hi anybody know how to read spc from this model is not 000000 model wx445 verizon

[drkcobra]

hi anybody know how to read spc from this model is not 000000 model wx445 verizon

Same story and method as any of the other models seem 0055.

[dilworks]

Seriously? The WX445 (AKA Citrus) is an Android phone... Would be nice to have an Droid-derivate which allows to use the old P2K unlocking methods :)

[drkcobra]

Seriously? The WX445 (AKA Citrus) is an Android phone... Would be nice to have an Droid-derivate which allows to use the old P2K unlocking methods :)

You're right, I screwed up. I was thinking about models like the WX400, WX404 & WX415. The WX445 Citrus does take a bit more work. It can be read with a lot of effort by using MWVSP too, but the easiest ways are to either simply flash it with the postpaid firmware or use my CodeZero program, although, I am not trying to make this a sales pitch.

[wchriseg]

read it in memory.. it is in the memory..

[ArkieKDealer]

Use cdma ws and once you are connected, click the mode tab then offline-d and the phone will go into diagnostic mode. You can then send 000000 and write settings as usual.

[rich hathaway]

You're right, I screwed up. I was thinking about models like the WX400, WX404 & WX415. The WX445 Citrus does take a bit more work. It can be read with a lot of effort by using MWVSP too, but the easiest ways are to either simply flash it with the postpaid firmware or use my CodeZero program, although, I am not trying to make this a sales pitch.

dude make it a sales pitch,i endorse it fully, that was one of the most usefull little programs
i have bought in the last year,takes about a half second to zero out the spc, and works for all the motos with the exception of android and iden.and we all know that moto's are kinda of pain in the ass to work on anyway,but this really helps save time,most the time your gonna have 'em plugged into rsd lite to do something anyway right.

so with 2 key strokes you can be done with spc and not have to read and change seams to do it.

[wizzik]

You cannot use WS to simply send 000000 to the wx445 if spc has been changed (by Verizon pre-paid for example).

If spc(msl) is not 000000 you must scan and read memory in CDMA WS to find SPC.

Then you can send SPC and write a new one.

EDIT: Also, if anyone has found ESN mem. address starting block for the wx445, please share.

[drkcobra]

Well it has been a while since there any activity in this thread, but I solve the problem on the WX445 by simply flashing the post paid sbf onto the phone.
Only prepaid models have a SPC that isn't 000000 so problem solved, plus even though I have never taken the time to truly compare features, I am sure there are some minor quirks or apps within the Prepaid model that are pointless. Not to mention I get get all the lifetime counters reset in the deal too.

[tanman89]

Well it has been a while since there any activity in this thread, but I solve the problem on the WX445 by simply flashing the post paid sbf onto the phone.
Only prepaid models have a SPC that isn't 000000 so problem solved, plus even though I have never taken the time to truly compare features, I am sure there are some minor quirks or apps within the Prepaid model that are pointless. Not to mention I get get all the lifetime counters reset in the deal too.

hi drkcobra.. how did you did flash? many thanks in advance

[123456&]

Flashing it just reloading the postpaid monster file with rsdlite, but if you want to read the spc it's simple use radiocomm.

[seroban]

after editing and file Enclosing NV phone does not start, there may be someone else Sbf file? Constantly hangs on motorola logo