View Full Version : Tutorial on how to make a serial cable for iphone
rich hathaway
02-22-2011, 05:42 PM
this is a tut i found, it is old,from 2007.
not sure if pin configs are the same for iphone 4 or not,but i thought it was intersting so i threw it up.
[hide-thanks]
[Only registered and activated users can see links]
[/hide-thanks]
i have never used it.
if anyone puts one together, please post results.
Joules
02-22-2011, 09:06 PM
another guide:
[Only registered and activated users can see links]
Joules
02-23-2011, 03:45 AM
found this:
[Only registered and activated users can see links]
Who wants to be the guinea pig :D
rich hathaway
02-23-2011, 10:01 AM
found this:
[Only registered and activated users can see links]
Who wants to be the guinea pig :D
i just sent them an email asking if this cable will give a comport on a pc,i did find what looked to be the exact same cable but different company last week they were the makers of the cable,spoke with there tech dept. in length and he assured me that it was made to not give a com port per apples specs. in fact it had a chip in the front and the back,the one in the front was to allow low level communication,the one in the back was to limit it. i ask him to make me one that would allow only,he replied this is closely regulated and must be approve by apple to avoid a lawsuit and they would not do it...
anyway not sure if this is the same cable but looks the same. i will post the answer when they get back to me.
Joules
02-23-2011, 10:48 AM
interesting, are you talking about the one made by redpark?
The thing about this one is in the description it says:
"Great for DIY projects ("peek and poke", data manipulation, modem applications, etc.)"
I would think things such as peek/poke require a com port
amoamare
02-23-2011, 02:00 PM
It doesnt make a comport, its a serial cable, it uses the comports serial already found on the computer. Serial cable is based on the the SERIAL port on the back, this serial port is usually assigned COM1 or COM2 most computers usually com with this hence the reason why you always have a COM1 and COM2 when you do a fresh install.
I dont know why your asking if it makes a serial port appear because thats not what this does it uses the serial port already installed on the computer, you hook it up to the correct serial port on the back of your comptuer and connect to either com1 or 2 if you never changed them.
2nd as far as i can tell this isnt what we need, this interfaces with the phone, but you have to have a application written on the phone that interfaces back. So again if no DIAG program intilizes no communications. You are more then welcome to try it and let me know though but that is why he has a program written for the iphone and one written for the computer, because you need to have one on the iphone to talk back.
Joules
02-25-2011, 04:40 AM
What are they discussing here:
[Only registered and activated users can see links]
Google translate:
[Only registered and activated users can see links]
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.