Sanyo 6780 Innuendo - SPC

[johnnyv2004]

I am trying to figure out the SPC range for the Sanyo 6780, so far I am having no success. Does anyone know a good range to search for the 6 digit SPC?

I am working on a Partial Flash to Cricket with CDMA Workshop. I have 3.6.0 CDMA and it does not include a preset as far as I can tell.

[thesmitty68521]

Try 0363:690E Legnth in bytes: 6

I found it somewhere in there.

[Nat3]

Do you by any chance have the drivers for the innuendo?

[johnnyv2004]

I will try it out here in a bit and let you know. Thanks!

[moeauc1]

Try 0363:690E Legnth in bytes: 6

I found it somewhere in there.

i think ur thinking another phone. this phones memmory is locked. there are no ranges to read. lease confirm. maybe i have a bad phone

[johnnyv2004]

Try 0363:690E Legnth in bytes: 6

I found it somewhere in there.

When I try that I get a length in size error. Still haven't figured it out.

[johnnyv2004]

Do you by any chance have the drivers for the innuendo?

I do have the drivers. I'm not sure how to get them to you though?

[whitey10tc]

I do have the drivers. I'm not sure how to get them to you though?
Just upload it to 4shared, Megaupload etc. Most are free.
Posted via Mobile Device

[johnnyv2004]

Here is the Sanyo driver I used, if it doesn't work let me know. Hopefully it's ok to post this link?

[Only registered and activated users can see links]

[johnnyv2004]

Here is the Sanyo driver I used, if it doesn't work let me know. Hopefully it's ok to post this link?

[Only registered and activated users can see links]


not sure why it posted twice - delete this please....

[johnnyv2004]

If that driver doesn't work this one will:

[Only registered and activated users can see links]


And if someone is able to unlock this phone please share. I am having no luck.

[customobile]

i tried both of those drivers and they did not work thanks for the help anyway

[johnnyv2004]

i tried both of those drivers and they did not work thanks for the help anyway

I had another user tell me the same thing. Here is some more info if it helps anyone... I am currently running windows 7 and not XP, I also tested the drivers out a few more times and the second one I posted is the one that will for sure work on windows 7, at least it works well on my pc. I connected the phone then went to device manager to find the missing drivers, I right clicked and selected update driver, then browsed to the driver location. After I select the driver it installs correctly and gives me a Sanyo USB port in CDMA Workshop.

[verneomar]

hey i need drivers for sanyo 6780 plz, those you all put here does not work! thankz

[eric303]

does anyone have the XP version of these drivers?

[tonasoledad]

here u go batos
[Only registered and activated users can see links]

[eric303]

Thankyou Tonasoledad, worked liked a charm. Confirmed on XP

[vicwire]

here u go batos
[Only registered and activated users can see links]

finally someone had it thanks

[tonasoledad]

wow 12 dow and only 3 thxs wow hahahah im jk nice u like the bro

[erocelmaster]

Excuseme anyway know how read spc for sanyo inuendo 6780 sprint?? thanks¡¡

[bawanyh]

did any1 figure out how to get the spc on this phone

Thanks

[tonasoledad]

LINK 1 IS DOWN HERE IS THE NEW LINK

[Only registered and activated users can see links]

[poii]

I got the driver but how in the hell do I access the menus from my PC? Bitpim, Datapilot, and Kyocera MPT all do not recognize it.

[frank3.16]

Please need how is the way get spc sanyo 6780 innuendo

[bawanyh]

Does any1 know how to read the SPC on this Sanyo 6780 Innuendo phone?

Thanks

[san20176]

the only way to get the spc is to get it by MEID. i got mine for $5.00

[LadyAudio]

Poii, Can you help me with getting the drivers? I've searched high & low and everywhere in between. Every link i find is either dead or not correct. I'd truly appreciate the USB modem drivers. Thanx tonz

[whitey10tc]

random test

[bigboi3000]

random test

These drivers do install but it is not reading as diag modem, it says usb modem and it still doesnt read port for workshop?

[JustinBriefs]

I have the same problem. The drivers install, but I cannot cannot connect to my innuendo with any CDMA tools. Has anyone been able to get this phone to show up in CDMA workshop? I can connect to the port, but it will not let me read the phone. I tried 3 different tools and even swapped out the USB cable.
Thx

[VincentsMommy11]

here u go batos
[Only registered and activated users can see links]

I hate to say this cuz i had such high hopes but this link is dead... i need to find the SPC for the 6780... since u seem to know where to get it i was hoping you could help me

[rich hathaway]

there are preset ranges in the newer versions of cdma workshop that will grab the spc for you.

[elisa191]

Hello all,

getting the SPC is so easy!

I will tell you how to do it but in return I need the actual Diag drivers for this phone!!!!!!

1 - go to boostmobile.com
2 - click on activate at the top of the screen
3 - put in your meid and click start activation
4 - follow all the links until you get to the end and it will give you your new number and MSL (Your MSL is your phones SPC)
5 - call boost at 1-888-boost4you and as soon as the automated guy starts talking dial 88 for dealer support
6 - when the tech comes on and askes for your dealer id give him ANY 4 digit number and tell him you need to cancel an account
7 - give him the info off the account you set your phone up on and it will knock your phone back off the system

Now you have your SPC and your phone is not tied to an account

__________________________________________________ ____________



elisa191

[kaspson]

have anybody find out how to read innuendo with cdma workshop?

[ownmart]

there are preset ranges in the newer versions of cdma workshop that will grab the spc for you.
ive got the newest, dont see it on there

[smackajaweea]

i have tryed this and can succsefully get my phone to charge on my computer but thats it i cant put music on it i cant do anything but charge it and also when i use these files i get two other devices to show up on my computer

[dgbear]

Can you share the drivers or a link that is active?
I cannot find the drivers.

I have a Sprint version 1.004SP HW:0204
What version do you have that is working?

Thanks in advance

[enggoubran]

no solution to get spc or any method to connect
Sanyo 6780 with cdma workshop