help programming Galaxy Tab for provider

[silky28]

hey all.

I have a Sprint version of the Galaxy Tab that I am trying to get to work on the Bell Mobility network. I have unlocked the SPC, changed the PRL to a Bell PRL (31402) and changed NAM settings but I can't seem to get service. Was hoping I could get some assistance.

CDMA workship reads:

MIN and DIR number: phone number given to me by carrier
MCC/MNC: 302/64
SID/NID: 16420/65535
P ch: 283 777
s ch: 283 475
scm/sci/accolc/nam: 3b/1/5/1

The connection status on the Tab shows:

Device and Min number:the phone number bell gave me
network: Sprint
Signal Strength: -91db
Service state: in service
Roaming state: not roaming
Mobile Network: either connecting or disconnected

A few questions:

1) I got 302/640 for the Bell Mcc/MNC number but I cannot enter a 3 digit MNC number in the phone. I read that I can ignore the last digit for the MNC and just put 64. Is this right?

2) why does the it still say Sprint under Network? shouldn't the SID/NID and MCC/MNC cause it to switch to Bell? When I go into debug mode on the phone the SID number looks good and reads reads 16420 Rev:6 but the NID is wrong at 10005 SI:1 when it should read 65535. Any idea why QPST and CDMA workshop see home NID as 65535 but the phone shows 10005? could Sprint have put a lock on the NID to stop you from changing providers?

3) would it be better to change the ESN to clone my BB storm since I know I have service on it? I could pretty much just copy all of the settings from the storm into the TAB to see if it works.

thanks guys,
John

[rich hathaway]

you need to write the country code (mcc) to 310 and the (mnc) to 00

[silky28]

Iv have done this but nothing has changed. Still reads sprint under network and the nid reads 10005 r6 si1 when it should be 65535

[yodita]

Hi I am trying to activate my sprint galaxy tab in mexico with iusacell carrier but I can't get the MSL code, how did you obtain it? is there some software to get it? thanks a lot and sorry about my english

[jaa93997]

Hello sir, how did you managed to access the SGT parameters? i just purchased an SGT and i want to make it work on the Iusacell network (Mexico). So far i am clueless..... :confused:

[davidom2001]

Pls how did you manage to get the SPC for the Samsung galaxy tab SPH-P100 bcos am working on here.

[davidom2001]

Pls guys i need 16 digit unlock code for Samsung galaxy tab SPH-P100 OR any other method of getting it SPC for unlocking.:confused:

[thesmitty68521]

Posting the same question within four minutes won't get your question answered any sooner. Please post once and then be patient for the answer. More than likely a lot of other people are trying to figure out the same thing. Please review our forum rules.

If you have CDMA WS try to do a scan on the Samsung 16 digit passwords and see if that works. Or try to dial 47*68#13580 and see if that takes you to a test screen and then dial 170 I believe and that should reveal the SPC. I don't have my notes in front of me to make sure this is the way to go.

Good luck

[emmatok]

Posting the same question within four minutes won't get your question answered any sooner. Please post once and then be patient for the answer. More than likely a lot of other people are trying to figure out the same thing. Please review our forum rules.

If you have CDMA WS try to do a scan on the Samsung 16 digit passwords and see if that works. Or try to dial 47*68#13580 and see if that takes you to a test screen and then dial 170 I believe and that should reveal the SPC. I don't have my notes in front of me to make sure this is the way to go.

Good luck

HI, HOW CAN I USE THESE CODES ON Galaxy Tab . BECAUSE I FIND CAN NOT FIND THE PHONE DIALER APPLICATION ON Galaxy Tab

[jsnow0626]

use memo pad to enter ##33284# code then enter spc then set to dial up network mode

to get spc enable debugging
goto cmd prompt
cd c:\android-sdk\tools
adb shell
getprop


this will get u spc

[dduran1591]

use memo pad to enter ##33284# code then enter spc then set to dial up network mode

to get spc enable debugging
goto cmd prompt
cd c:\android-sdk\tools
adb shell
getprop


WORKED LIKE A CHARM THANKS A LOT! :)


this will get u spc

[Danny2878]

I wanna flash a sprint samsung galaxy to cricket and want to know what files do i need..I have cdma ws and qpst. I really appreciate the help. thanx.