View Full Version : [Release] VS660 Vortex Verizon Firmware.
Killgorian
12-17-2010, 08:26 PM
Here ([Only registered and activated users can see links]) is the .dll, tot and scr files for the Verizon vortex. Please hit thanks if they're useful.
Killgorian
01-14-2011, 04:53 PM
There's an update out for this if anyones interested pm me.
Charles Dean
01-15-2011, 06:21 AM
I need to re flash original firmware, phone starts to hard reset but then restarts right back to lg logo screen and stays. So I am assuming Im stuck in a boot loop. I can however connect via pc so if I could just get my hands on the actual firmware to update via kdz id be set......can you help me?
123456&
01-15-2011, 11:51 AM
Download the firmware posted above, then put your phone in emergency mode connect to lgnpst, it will fix your problem
Remember after that you have to repair your meid.
usman_zeeshan
02-02-2011, 04:47 AM
any body know how to load tot file on emergency mod
123456&
02-02-2011, 08:58 AM
There is a post in LG Section, How you can load tot files.
rich hathaway
04-02-2011, 04:29 PM
HARD RESET BUTTON AND MENU VERSION AND SD FORMAT INSTRUCTIONS FOR LG VORTEX
Option 1 – Using the Android OS menus
If you can access the menus, you can perform a hard reset from within the Android OS software.
1. From the Home screen, press Menu.
2. Tap the Settings button.
3. Select Privacy.
4. Tap the Factory data reset option.
5. Select Reset.
6. Tap Erase everything.
The LG Vortex will then hard reset and may take a few minutes to complete.
Option 2 – Using the hardware buttons
If the LG Vortex is frozen or unresponsive and you can’t access the menus within the Android OS to perform a hard reset, you will need to use this option that utilizes the hardware buttons on the device.
1. Power the phone off. If it won’t turn off, pull the battery from the device.
2. Press and hold Volume Down, Home, and the Power buttons simultaneously.
3. Wait for about 10 seconds until the the screen lights up and the phone starts to boot, then release all three buttons.
The LG Vortex will then go through the hard reset process. Wait a few minutes and the phone should reset with factory default settings and data loaded into memory.
SD Card Format
In cases where you don’t want items remaining on the SD card, you can either swap the SD card with another and keep the one with your data on it, or you can format it:
1. From the Home screen, tap Menu.
2. Select Settings.
3. Select SD card & phone storage.
4. Tap Unmount SD card.
5. Tap Format SD card.
6. Select Erase Everything.
The SD card will then be formatted.
DONT FORGET TO PUSH THE THANK YOU BUTTONS!
tinobarko
09-01-2011, 03:36 PM
dos any body has the new firmware for lg vs660ZV7 THANK YOU
tinobarko
09-01-2011, 06:35 PM
aim intersted i send you pm you didnot respond.......................check ur pm thank you
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.