How to Find SPC of Samsung Epic

[parin]

Hey guys
i need help to find the spc of samsung epic 4G
please help me

i have CDMA Workshop latest version
:confused::confused:

[rich hathaway]

put the phone in diagnostic mode, there are several variations of how to do this,such as:
dial-
##diag# or #*#diag# or if that doesnt work try leaving the # off the end, some phones you have to press send after that some you dont. i dont have one to try on. but when you get it into diagnostic mode it will show up on a com port,connect with workshop and read the phone. go to security and press read .this should give you your spc,hit send and then write o's. again i dont have one to try on but this works with most samsungs.

[parin]

ok will try & post
Thanks a lot for posting

[basheerbr]

when i connect to diag mode it shows,windows needs to install driver software for your generic serial. what can i do?

[rich hathaway]

[HIDE-THANKS][Only registered and activated users can see links]
[/HIDE-THANKS]

here are the samsung drivers,they are on this site in more than one place,and easy to find if you look,but here they are for you.

download and unpack/install them and then follow the directions i posted above if they are not automatically found.

[Pac3comm1]

Rich I fixed your link to make it clickable.

[rich hathaway]

thanks,what was wrong with it?

[Pac3comm1]

it should look like this
[hide-thanks]
[url]bunchabullshitbunchabullshitblahblabblah.com[/ url]
[/ hide-thanks]

Just make sure that you remove the space from between the / and the url and presto your link is clickable.

[rich hathaway]

thanks dude i didnt know that i will have to go back thru old posts and check them. thanks again.

[parin]

Thanks a lot sir for giving the link to download the USB Drivers

[rich hathaway]

your welcome,in the future just hit the thanks button when someone helps you,it is at the bottom of every post.

[parin]

Finally Got the way How to get SPC for EPIC with your HELP

Put the phone on Diag Mode by dialing ##8778#
Select Modem in USB
if u are in Win7 Drivers will get installed automatically from internet

IN CDMA WS
Select the COM on which phone is lying
Press connect
In Security Tab
There is option
SPC/User Lock
From Drop Down Method Select Default NV Method
Press the small dot below
U will get 2 box
Than press read
u will see 000000
press write button & it will change to 000000

16digit Pass for Samsung Epic is 01F2030F5F678FF9

[rich hathaway]

great,glad to hear of your success.

[parin]

Thanks a Lot for the Help

Sir it woul be gr8 if u can also highlight how to get the MSL for the same

[rich hathaway]

are you trying to flash to cricket? if you are you dont need it,just the spc.

[parin]

No sir i want to flash it for Reliance in India

[rich hathaway]

well, i am afraid i wont be to much help with that.(not familiar with reliance).however, if you have the correct .prl talk and text should be pretty easy.
this is kinda a generic,if you will,way to basic flash most phones and is covered here in about 50 places,but here you go.
open workshop,
send spc,
go to the tab "other",
then click "write" for .prl
that will open a search window for you to locate wherever you put that reliance .prl
select that .prl,then it will write it.
next
go to the "nam" tab
then you will need the sid for that specific region,
click read,
then erase the old sid,
type in the correct sid,
also i am not sure about the nid,here in the midwest,(USA) we use 66535,you may need to change this also,but again i am not sure for india.
also the country code we use here is 310 this is the mcc box,you will need to input your correct country code.
this should give you working talk and text. good luck let us know if you get it.
if this helped you dont forget to hit the thanks buttons.

[parin]

I its ready with Text & Call
only thing i need now is want to make data run on it

[rich hathaway]

well i know nothing about the requirements for data in india with reliance.so my help will be very limited.try to search for a custom rom for reliance.or maybe the no proxy solution will work with them ?? i really dont know. do they have an andriod plan? if so try the no proxy.it is posted here. if they do and you cant find it i will give you a link. good luck.
or if you cant you might be left with only using the wi-fi.

[drummerboy42]

In the new CDMA Workshop, when you send the 16 digit password, and then send the SPC it will show three different codes at the bottom. Maybe one of those is the one you need. As far as I knew SPC (Service Programmer Code) and MSL (Master Subsidy Lock) are they same. Sprint just calls theirs a MSL.

[parin]

Sir can u post the link for no proxy
As reliance doest needs proxy
Thanks a lot for ur help

[parin]

Finally got it working on Reliance
Thanks a lot all for helping me out