Flash HTC Mogul w/o CDMA Workshop

[ljay67]

**WHAT YOU WILL NEED!
[hide-thanks]

For those who cannot buy CDMA Workshop which for the record is worth the price:

qpst

ActiveSync

metro pcs prl 2004 or newer (can be found here [Only registered and activated users can see links](Updated ([Only registered and activated users can see links])) )

1. Install QPST found here [Only registered and activated users can see links]

2. Install ActiveSync found here [Only registered and activated users can see links]

3. Install HTC Drivers found here [Only registered and activated users can see links]

4. Install NETCF_3.5_ppc_ce5 ONTO THE PHONE via ActiveSync or MicroSD Card found here [Only registered and activated users can see links]

5. Install BAFMSL ONTO THE PHONE via ActiveSync or MicroSD Card found here [Only registered and activated users can see links]

6. Open GetSPC on the phone, WRITE DOWN THE SPC CODE which is 6 digits
(Note: the spc is never the same with other windows mobile phones)

7. Open Device manager (Right-Click 'My Computer'->Manage->Device Manager->Double Click 'Ports'-> Find your phone and write down/memorize the COM port.)

8. Put the phone in Diag mode by pressing the green phone and dialing ##3424#
(Note: It will just go to Diag mode, no need to press anything else)

9. Open QPST Configuration and connect to your phone

10. Open SERVICE PROGRAMMING

11. Go to the 'Roam' Tab

12. Browse for thet prl you downloaded when you started hopefully

13. Write the prl to the phone, YOU WILL NEED THE SPC CODE.

14. Dial 611 to confirm the prl change. then *228 to activate the phone on your account.

15. Call all of your friends and tell them you're beast.

see the second page for web settings all credit to pacecomm1

Done!
[/hide-thanks]

post any questions be sure to hit the thanks button

also don't hesitate to critique this is my 1st guide

[Dex]

well i im gonna critique by editing i added post thanks

[ljay67]

...where's my guide?

[whitey10tc]

...where's my guide?LJay, not sure if above is the entire guide, or if some how part of it got lost. Let me know so I can try to track it down.

[Pac3comm1]

From where Im sitting the guide is missing. All that appears is the "what you need" part. Not sure what happened, but if anyone can fix it, its our team!

[ljay67]

yeah Pacecomm1. This is why I wanted to be a moderator of this thread :/

[ljay67]

WOOHOO! I wrote another. any pointers for editing this guide?

[Mr._Pseudonym]

;^) My favorite pointer is: Back up, back up, back up. Always keep copies of anything important that you post. You'll never know when you might want to re-post it somewhere else, for example....

[Dex]

well i added hide thanks once again and as u can see it worked properly

[ljay67]

ok as long as it works lol I'm fine, I can never hold anything against u guys cuz u helped me thru a lot of phone probs :p

[Pac3comm1]

Not bad for your first tutorial Ljay. You did leave out a few things, such as once the Prl is written, and ESN added to the inventory, they can call *228 and follow prompts to activate the device on their account. This is a clear alternitive to using CDMA WS. Now that the phone is active, lets add internet. For this you will need the following...

[hide-thanks]CM Proxy Killer
[Only registered and activated users can see links]

Arcsoft MMS Cab
[Only registered and activated users can see links]

Resco RegistryEditor
[Only registered and activated users can see links]

Resco explorer
[Only registered and activated users can see links]
[/hide-thanks]






Open the task manager to and look for a running process HTC_CM_Guardian. If it is not present, then its not running currently and you can proceed. If it is running, highlight it and kill task.
Now this is the tricky part. Be very careful when editing the registry. Once the programs above are installed, open the resco registry editor and click the binoculars at the bottom of the screen. When the search menu appears, type in CM Guardian. It will search thru the registry until it is located. Once it is located, on the lower left hand part of the screen you will see the word "up". Press it once and it will take you to the folder list where CM Guardian is located. Press the CM guardian folder until a menu pops up that says actions. Select actions and then delete the entire folder. It should give you the option to "Delete All". Do so. You have now removed .exe that gives you all sorts of trouble when trying to edit.

Finally,
WAP

1: Goto settings -> Connections -> Connections
2: Remove any connections that are there
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.

4: Set the following values:

M.IP Settings:
MIP_MODE = Simple IP Only

M.IP Default Profile:
[Only registered and activated users can see links]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)

Security:
[Only registered and activated users can see links]
[Only registered and activated users can see links]
PPP PASSWORD = metropcs

5: Goto Connections and delete any existing connections and setup a new one using the following settings:

Number to dail = #777
[Only registered and activated users can see links]
Password: metropcs
Domain: (Leave Blank)

Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)

6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.

Example if you leave as Sprint then choose that one as your internet connection and do it for both settings.

MMS

MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!

Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.

1: Install Arcsoft MMS version 5.0.70.24 from Verzion.

2: Open your Messaging and click on the SMS/MMS option.

3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.

4: Add a new server with the following settings:

Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: [Only registered and activated users can see links]
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K

5: Click "Done" and then set the new server as default.

6: Using a Registry Editor edit the following values:

[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]

DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )

[ljay67]

thanks Pace, forgot web :) so when r u gonne get started on that CDMA Workshop guide?

[Pac3comm1]

soon brother soon.

[ljay67]

alright then.

[McNugget]

very useful... two thunbs up! lol