Blackberry 8230 VSM File

[123456&]

Does anyone knows if there is VSM file for blackberry 8230 available?
thanks in advance.

[Pac3comm1]

If im not mistaken, the 8230 is the pearl flip, if so check the vendor ID for me and I think I can get that for you. Or at least narrow it down cuz I have just about 100 or so VSM's, but without the vendor ID I have no idea which is which, for they are nothing but numbers!

[123456&]

Ok, thanks i'll get the vendor id then i'll send you.

[Pac3comm1]

COol. You can just PM it to me and Ill see what I can come up with

[123456&]

Ok, bro thanks a lot.

[Pac3comm1]

Here Try this, hold down the Alt, Shift, and H at the same time. It should pull up a screen that tells you the vendor ID number. It ll be three digits.

[123456&]

On my blackberry8230? i have to press alt, shift and h?

[123456&]

Never mind i got the three digit of vendor id, what next step?

[Pac3comm1]

Google search for vsm file for that vendor ID and if you can get the number I can get you the VSM file.

[123456&]

I sent you the Vendor id

[_JiGaBu_]

as far i know you can't load VSM as long you Nuke the phone,, you need MFI file to do this,

[123456&]

I do have MFI 2.0.1.3, what i don't have is vsm file for this model.

[_JiGaBu_]

i mean the file For example MFI-21987-000 you need like this inside the mfi folder. not the .exe, you will have error cannot find the MFI on server something like that,

[123456&]

hmmm so how i can avoid that problem?

[_JiGaBu_]

you need to look for MFI file,, try it plug your phone in MML let it run if it pass, you got no problem but if its sayz error you need to look for it:)

[123456&]

thanks bro i'll keep that in mind, until i'll get the vsm file.

[Pac3comm1]

Here ya go bro. It should be one of these three. I narrowed it down out of about 500. If they dont load let me know and ill send you the next six. If you downloaded the MFI multiloader I posted, BEFORE YOU PLUG IN PHONE, open program, uncheck both the autostart and full erase. Then hold down shift,ctrl,Alt and F12 to engage the dropdown menu. click load VSM and point it to one of the files i m sending you. Hopefully one of the three will load successfully. Let me know how it goes!

[hide-thanks]
[Only registered and activated users can see links]
[/hide-thanks]

I posted these here for anyone else who needs them. Im pretty sure that at least one of these will work for the curve, pearl, and pearl flip.

[123456&]

Thanks a lot man, i'll report tomorrow morning.

[Wrecked Johnson]

what is a VSM ??? I have no idea what that is.

[Pac3comm1]

Cool Beans 123456&. Lj the Vsm file control branding of the phone as well as the boot screen.

[123456&]

pacecomm1 Do i have to nuke first the bb8230 to load VSM file?
thanks in advance.

[123456&]

pacecomm1.
this is what i tried so far, wipe bb8230 first, after nuke and then i've been trying to load the vsm, but every time i try it says.
timeout. cannot reconnect to radio. the device may be password enable, please make sure the password is correct. cannot connect to radio. this happen when the phone is nuked, and i try to load vsm file.

[123456&]

If i try when the phone is on, i got this ERROR.
Feature not supported by firmware version: Command 0xff40 Can't get comfirmation. cannot query if feature is supported. cannot set Branding info. Cannot load vsm file.

[_JiGaBu_]

yes like what i said you need to nuke each phone to load VSM file's unfortunately its hard to get this file, its been a while searching for this file, i'm still looking around i know someone have this,, let you know,,

[123456&]

yes like what i said you need to nuke each phone to load VSM file's unfortunately its hard to get this file, its been a while searching for this file, i'm still looking around i know someone have this,, let you know,,

you're right man, i've been looking for it everywhere and no luck.

[tinobarko]

you guys need new version of mfi multiloader at least 4.11.1.............with security key..............good luck