u mamy
06-05-2010, 03:14 AM
is for windows phone REMEMBER - make sure you have the $40 plan, it includes internet and mms (picture messenging) is for windows phone
STEP 1 *** ------------------------------------------------------------- ***
1: FIRST FLASH YOUR PHONE TO METROPCS... SO THE NEXT STEP WILL WORK...
2: Open your phone PAD and DIAL ##778# then select " EDIT " and enter your unlock code. should be = 000000
Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
[Only registered and activated users can see links]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
Security:
[Only registered and activated users can see links]
[Only registered and activated users can see links]
PPP PASSWORD = metropcs
STEP 2 *** ------------------------------------------------------------- ***
WAP = ( INTERNET SETTINGS )
1: Goto Settings -> Connections -> Connections
2: Remove any Connections that are there, ( if u use a custom rom = they should have ( Network ) = use this one, DON'T DELETE )
3: Goto Connections and delete any existing connections and setup a new one using the following settings:
Number to dail = #777
[Only registered and activated users can see links]
Password: metropcs
Domain: (Leave Blank)
Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
4: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the Connection you just setup.
For Example: if you leave as Sprint or Network then choose that one as your internet connection and do it for both settings.
STEP 3 *** ------------------------------------------------------------- ***
MMS = ( PICTURE MESSAGES )
MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!
Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.
1: Install Arcsoft MMS version 5.0.70.00 from Verzion or Sprint. I attached the one I use.
2: Open your Messaging and click on the SMS/MMS option.
3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.
4: Add a new server with the following settings: or rename SPRINT to METROPCS
Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address:[Only registered and activated users can see links]
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE "NETWORK" OR "The Internet"
Send limit: 399K
5: Click "Done" and then set the new server as default.
6: Using a Registry Editor edit the following values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
DELETE KEY -> "X-sprint-MDN" or rename and use the next line below...
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )
STEP 1 *** ------------------------------------------------------------- ***
1: FIRST FLASH YOUR PHONE TO METROPCS... SO THE NEXT STEP WILL WORK...
2: Open your phone PAD and DIAL ##778# then select " EDIT " and enter your unlock code. should be = 000000
Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
[Only registered and activated users can see links]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
Security:
[Only registered and activated users can see links]
[Only registered and activated users can see links]
PPP PASSWORD = metropcs
STEP 2 *** ------------------------------------------------------------- ***
WAP = ( INTERNET SETTINGS )
1: Goto Settings -> Connections -> Connections
2: Remove any Connections that are there, ( if u use a custom rom = they should have ( Network ) = use this one, DON'T DELETE )
3: Goto Connections and delete any existing connections and setup a new one using the following settings:
Number to dail = #777
[Only registered and activated users can see links]
Password: metropcs
Domain: (Leave Blank)
Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
4: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the Connection you just setup.
For Example: if you leave as Sprint or Network then choose that one as your internet connection and do it for both settings.
STEP 3 *** ------------------------------------------------------------- ***
MMS = ( PICTURE MESSAGES )
MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!
Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.
1: Install Arcsoft MMS version 5.0.70.00 from Verzion or Sprint. I attached the one I use.
2: Open your Messaging and click on the SMS/MMS option.
3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.
4: Add a new server with the following settings: or rename SPRINT to METROPCS
Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address:[Only registered and activated users can see links]
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE "NETWORK" OR "The Internet"
Send limit: 399K
5: Click "Done" and then set the new server as default.
6: Using a Registry Editor edit the following values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
DELETE KEY -> "X-sprint-MDN" or rename and use the next line below...
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )