How to Flash LC11 with custom drivers | RH

[elisa191]

How to Flash your Samsung LC11


Here is the step by step Video to flash your SAMSUNG LC11


****** DISCLAIMER ********

keep in mind that this is put together for the experienced flashers so you
will not see all the little steps in great detail. Also I use my custom profiles via the PAID
version of CDMA Workshop. I do not support qpst and cracked CDMA Workshop.


****** WHAT ARE PROFILES ********

They are the .nam file created from CDMA Workshop (Only the paid version) and then saved. It contains the entire flash minus the PRL


Give a thanks to Rich Hathaway for Development and Drivers!


Enjoy the throwback INTRO!!!!


--MOVIE REMOVED--


DOWNLOAD THE 64BIT DRIVER PACKAGE:[hide-thanks] [Only registered and activated users can see links]
[/hide-thanks]


DOWNLOAD THE 32BIT DRIVER PACKAGE:[hide-thanks] [Only registered and activated users can see links]
[/hide-thanks]




****** IMPORTANT SETTINGS ********


If your flashing these for customers make sure that when you log into the internal menu on the device that you go to the Network tab and then under Wifi Configuration change the 802.11mode from the factory b/g to b/g/n like in the photo


<a href="[Only registered and activated users can see links]" target="_blank"><img src="[Only registered and activated users can see links]" alt="Free Image Hosting at imageshack.com" border="0"/></a>

[cosminch]

hi! i've already asked this on my thread regarding SCH LC11, but i'll try my luck :)
Does anybody knows a way to switch bands with this router, i mean this works on CDMA but i know that it also can handle GSM networks.
The carriers in my country are all GSM based, WCDMA,HSDPA,HSPA,LTE
Thnx and please give me some HEEEELP!

[precio6]

Thanks for this tutorial Tom.
I'm going to test these steps later on today.

[rich hathaway]

hi! i've already asked this on my thread regarding SCH LC11, but i'll try my luck :)
Does anybody knows a way to switch bands with this router, i mean this works on CDMA but i know that it also can handle GSM networks.
The carriers in my country are all GSM based, WCDMA,HSDPA,HSPA,LTE
Thnx and please give me some HEEEELP!

you can change that with ws or dfs,it is already set for lte with fallback to hdr

[cosminch]

thanks for reply
believe me that i've kind of tried anything but with no success! always enters in CDMA mode, and for GSM tells me that it is inactive

[precio6]

I tried this but with no luck. Are those drivers good only for 64bits OS or they will work on 32 bits OS?
I'm asking that because on the name of the drivers there is this text as part of the name nvusbx64...

[rich hathaway]

thanks for reply
believe me that i've kind of tried anything but with no success! always enters in CDMA mode, and for GSM tells me that it is inactive

to make those changes you need to first set to nv only then reboot then change that value otherwise when you have it set to ruim it is set to lte with hdr fallback and the only way for you to change that is to root the device or to find a copy of lc11 sdk

in ws change it here
[Only registered and activated users can see links]

[cosminch]

the link doesnt work

[cosminch]

to make those changes you need to first set to nv only then reboot then change that value otherwise when you have it set to ruim it is set to lte with hdr fallback and the only way for you to change that is to root the device or to find a copy of lc11 sdk

in ws change it here
[Only registered and activated users can see links]

Hi!
Are any unlock tools fore this device. Mine is locked on Verizon and I can't use it elsewhere!
Please help!

[yazeed_oo4]

thank much soooo i will try

- - - Updated - - -

i can't download drivers

[JaiFar1996]

to make those changes you need to first set to nv only then reboot then change that value otherwise when you have it set to ruim it is set to lte with hdr fallback and the only way for you to change that is to root the device or to find a copy of lc11 sdk

in ws change it here
[Only registered and activated users can see links]


Hey Rich...on the LC11...the me*d can be changed over and over or ony allows a one time change? i got one going but i dont want to test changing it again without asking..

[rich hathaway]

lc11 doesnt require anything special to change it,it is the only one like that.

[JaiFar1996]

LC-11 doesnt work that great in my area :-/. Data speeds fluctuate alot and sometimes freezes. The 4510 and 4620 are way better

[rich hathaway]

if you guys want the best bang for your buck,get a zte 890L,it will run circles around any mifi you have.I highly recommend them

and I have the solution out for it already :)

[JaiFar1996]

I always set to automatic in mode pref for the mifis. Changed the LC11 from automatic to cdma_hdr and seems to be working a bit better. But the 890L is remote preflash as well? or just need the drivers to program? I think what most are worried is about the turnaround time to get mifis back. That's why its best to just make an appt with Tom and get it done remotely

[rich hathaway]

890L is a remote or mail in load of the devices full firmware that unlocks the meid and has the beta version of dethrottle in it also,after the load the device can be programmed normally.we supply the drivers or they are on the web

[JaiFar1996]

890L is a remote or mail in load of the devices full firmware that unlocks the meid and has the beta version of dethrottle in it also,after the load the device can be programmed normally.we supply the drivers or they are on the web

Cool..I have quite a few preflashes credit with you all and will purchase a few more to knock out my inventory. I have one 890L that ill get done. Ill see if Tom is available Mon or Wed

[JaiFar1996]

Rich, I need a little expert advice. I seemed to have killed my lc11. I read that there was a way to fix the connectivity issues on this device. I did what it says on this link: How to Fix Samsung SCH-LC11 WiFi Disconnects : EVDOinfo.com ([Only registered and activated users can see links])

Well, lc11 rebooted. Now I cant connect to it at all! I factory reset it and still nothing. I had disabled usb mode so I cant even use dfs to rebuild it. :-/. I cant see it on my networks but it has a red x and when I click on it to connect it says: "The settings saved on this computer for the network do not match the requirements of the network." I changed the computer propeties to AES and still nothing

[rich hathaway]

not sure what happened but sounds like u need to reload the device or at least reload the nv back to it so u need to connect to it via usb,go to "open network and sharing" on yer pc and then "manage wireless networks" then remove the device from there and then try to use the default login to connect to it,if u can then set usb and reload the software and or nv's

[JaiFar1996]

got it....looks like the issue is common to this device. Its all over google. dammit! Apparently tier 2 verizon said it was a security issue with this device.

[rich hathaway]

ok good deal,so what happened to it and what did u do u do to recover it,in case it happens to another member.

[JaiFar1996]

ok good deal,so what happened to it and what did u do u do to recover it,in case it happens to another member.

theyll need to do it thru the DUU.
What Are The Required Steps To Upgrade To GC08 For My SCH-LC11? : Verizon Wireless Cell Phones | Samsung ([Only registered and activated users can see links])

[JaiFar1996]

How are you all doing the firmware update with the samsung update tool? i get the port but cant connect! it used to work

[rich hathaway]

you enable the port thru "selectusbmode" in the device via wifi,did u do that?

[JaiFar1996]

The fw update can be done via download mode. I used to get the lc11's out of the box and update them before I took any steps to flashing them. But now it doesn't work. The tool sees the port but when I click "start download" it says cannot open port

[rich hathaway]

oh,thats probly because you have samsung kies installed or another program that is causing that port to be busy

[JaiFar1996]

Anyone gotton the Samsung sch-lc11 upgrade tool to run on windows 8? It tries to install the samsung drivers and tells me OS not supported. Dumb move..I shouldve bought a windows 7

[rich hathaway]

i have drivers modified for win 8 for lc11,win 8 is so picky about driver signing it was tough to get that working

[moh2018]

thanks alooooooooooooot you help me very much

[atlgamerz]

how would one put this device in usb mode ive looked everywhere cant figure out how to

[rich hathaway]

you need to log into the ui and send the address for select usb mode, i posted it in the forum, its still there but im not where i can look up and post the link right now so you will have to look for it but it is here.

[atlgamerz]

the drivers dont seem to be working im using windows 7 64 bit

[JaiFar1996]

They work perfect w/Windows 7 64 bit. It's 8.1 where it gets tough