PDA

View Full Version : Samsung Behold T919 Firmware Remove User Lock



meanngreen04
04-01-2010, 01:26 PM
1. Install drivers and unzip files.

2. Place phone in Bootloader by holding volume down, camera button, and press power. Continue
to hold volume down and camera button. Will show bootloader screen.

3. Plug in usb to computer. Should recognize Qualcomm MSM. Drivers are in zip file.

4. Start the MSM. Click on search for phone.

5. Flash firmware.

6. User lock removed.

All needed files: [Only registered and activated users can see links]

love2sin
04-02-2010, 01:58 PM
Is this a Full Flash or just for USER LOCK?

Will this Flash Fix looping handsets?

Thanx

ownmart
04-02-2010, 02:05 PM
behold is gsm. so not for cricket

userlock meaning just remove password if forgotten right

meanngreen04
04-02-2010, 03:29 PM
Full flash...bin and all.

tinobarko
05-11-2010, 06:12 PM
[Only registered and activated users can see links]

Dragon20056
06-20-2010, 05:08 AM
plz i need the samsung behold T919 Drivers

ecneics
06-20-2010, 05:17 AM
I always use an nspro dongle for samsung user codes on gsm and spst of cdma ws on cdma. If I'm real lazy usually you can still enter the master clear on samsungs while they are locked. I've never had to clear a user code on a behold though. I may end up using this. thanks.

Isaac28
06-30-2010, 02:24 PM
I downloaded the stuff from the link and unzipped everything, then I made my phone went to the red and black screen saying "DEMSBL boot loader etc." but my computer wont recognize it after it says qualcomm cdma msm. Help.

Capadac
07-25-2010, 09:49 AM
i got a error: amms write 12.7s

TylerM784
07-26-2010, 01:39 AM
i got a error: amms write 12.7s

I was having the same error as well. What I did to successfully flash the phone:

Check "Full Download" only.
Load "Boot" directory
Load RSRC1 files
Load RSRC2 files
Load Factory FS files.

Flawless results afterwards. I was having boot loop issues, which is what brought me here. Many thanks to OP, as well.

darioyolo
08-07-2010, 12:04 AM
full download done all ok but tmobile lock is on

mobomobile
09-18-2010, 05:24 PM
thanks TylerM784, your instructs worked. i didnt have a lock on mine, just water damage & it would'nt go past the welcome screen. but now it works perfectly again.

ipeverywhere
10-09-2010, 04:17 PM
I couldn't get the phone into bootloader mode no matter what key combinations I tried. So with that said, there's no need for a full firmware flash to get rid of the user lock. You can do a hard reset by pressing the volume down+call+end+down buttons. When it powers up it will be in recovery mode. You'll know it's in recovery mode when there's an exclamation point on the screen. Now simply press the menu button and the phone will do a factory wipe. I highly suggest a fully charged battery before a hard reset on any phone.

Peace

ChauncyG
10-26-2010, 08:35 PM
"All needed files: [Only registered and activated users can see links]"

I have the same issue. Are these files available anywhere else? This one no longer works.
Thanks for your good work.
ChauncyG

bawanyh
11-14-2010, 07:44 PM
The link is dead can some post a working link?

Thanks

thephoneguy913
11-14-2010, 10:52 PM
Here you go bro....

[Only registered and activated users can see links]

phonelover1
12-21-2010, 11:24 PM
thanks u are the best

Lando Riv
10-26-2012, 02:20 AM
do you mind loading a new link.... megaupload is blocked.. needed these files to fix my phone... HELP!!!