PDA

View Full Version : 4510L prepaid firmware?


RandomName
03-15-2014, 10:21 PM
Anyone know where I can get the infamous prepaid 4510L firmware (verizon or generic)? Is 220 firmware what everyone is flashing the 4510L with? Thanks in advance.
elisa191
03-16-2014, 10:28 PM
You don't need it at all on the 4510

elisa191
RandomName
03-16-2014, 11:21 PM
I messed it up :/

I read all the NV items (ALL) from the gusto 2, then wrote them to the 4510L. After that it gets not signal and has no WIFI, however I can still connect to it with CDMA workshop. I tried factory flashing the firmware but it fails. Any chance I can get a backup of all nv items and just write them to the 4510L to get it back into a workable state? Any other solution or is it bricked? Thanks!
elisa191
03-17-2014, 12:41 PM
You can run the firmware back onto the device using a factory DUU from verizon here is the link to do that. You may have bricked the modem but I don't know I have never done what you did but if it can be fixed I think this will do it.

Also pull the lte card out when you run the DUU to it

Hope this helps

elisa191

[Only registered and activated users can see links]
RandomName
03-17-2014, 01:45 PM
The firmware update runs all the way through the process then reports failure 18. No joy :(

Any chance you can get access to a 4510L and backup all the NV Items so I can try writing them to mine? I have a feeling that is the issue (I should have backed them all up first, but hindsight is 20/20). Thank you for the assist.
RandomName
03-17-2014, 03:28 PM
Here is the fun error the firmware tool gives, it looks like the PRL wont update. I tried every SPC and CDMA WS keeps saying its wrong.

I even ran the MEID through a few SPC calculators and it says the SPC should be 000000. When I try it, it is rejected...

[Only registered and activated users can see links] ([Only registered and activated users can see links])
bakenast
03-17-2014, 06:06 PM
[Only registered and activated users can see links] this if u didnt already do so
RandomName
03-17-2014, 06:59 PM
DUU_Verizon_MiFi4510L_FW2.28.02.exe

Thank you. That is the one I have tried already, it fails updating the PRL. I think what I need is all the NV Items "read all" in CDMA Workshop. I am thinking I overwrote some critical ones from the ----- phone and messed it up. Happen to have a 4510L handy?