RIP MOBILE-FILES
02-09-2010, 07:00 AM
Helio Ocean WAP solution.
I guess some people have been asking for the help with the helio ocean wap. I cracked this a month ago, just never posted it as it is an older phone, I didn't think it would catch more interest. Anyhow here you go..
First of all you want to make sure your phone spc is set to zeros and it has a cricket prl. I will show you how to get wap on this phone, assuming you already know how to get the phone talk and text, if not start searching there are many tuts out there that teach you how to get it done.
Anyhow first thing I did was set all the manual settings on my phone such as user name and such.
Dial ##3282# enter your spc by this time it should be all zeros
go to user name, then profile 1
settings should be as follow:
[Only registered and activated users can see links]
SPI MN-HA: 1234 (after reset it shows 4D2 wap still works)
SPI MN-AAA: 1234 (after reset it shows 4D2 wap still works)
M Home Address: 066.179.166.148
Prim Home Agent: 010.000.005.021
Sec Home Agent:010.000.005.022
Rev Tunnel Pref: Disabled
Then save and edit Profile 2. Profile 2 I set to the exact same as Profile 1.
Save reset.
Dial ##1122 End (must be done quickly)
Go down to NGB config
Home URL: [Only registered and activated users can see links]
Proxy: wap.mycricket.com
Then exit save.
Now for the fun part first of all before you access EFS you need to unlock the Helio Ocean I used CDMA Workshop.
The password is 7341B6CDCFFA9692
Once phone is unlocked open bitpim and connect phone manually to the correct port. (You must close CDMA workshop for port to be available)
On top go to view, and make sure View filesystem is checked if not check it.
On the left go to Filesystem Now click the little blue folder
Once that pops up all the options click on wipi then shared, then NGB.
Under NGB folder you will see cwconfiguration.ini right click and save to the desktop.
Open file with winhex.
This should start on offset 46d On top go to position go to offset put 46d and i should take you to the beginning of [CONFIG] after that just copy my settings
[CONFIG]
URL=str:[Only registered and activated users can see links]
PROXY=str:wap.mycricket.com
SEARCH=str:[Only registered and activated users can see links]
JUNE=str:[Only registered and activated users can see links]
PORT=int:8080
AUTOCOMPLETE=bool:true
SCROLL=int:0
FONTSIZE=int:1
DTD=int:1
MENUSET=bool:false
DORMANTTIME=int:255
MUX=int:2337
NATE=int:1
COMPRESSION=bool:true
NEWURL=str:[Only registered and activated users can see links]
ZOOM_LEVEL=int:100
DEFAULT_FAILE_COUNT=int:0
I guess some people have been asking for the help with the helio ocean wap. I cracked this a month ago, just never posted it as it is an older phone, I didn't think it would catch more interest. Anyhow here you go..
First of all you want to make sure your phone spc is set to zeros and it has a cricket prl. I will show you how to get wap on this phone, assuming you already know how to get the phone talk and text, if not start searching there are many tuts out there that teach you how to get it done.
Anyhow first thing I did was set all the manual settings on my phone such as user name and such.
Dial ##3282# enter your spc by this time it should be all zeros
go to user name, then profile 1
settings should be as follow:
[Only registered and activated users can see links]
SPI MN-HA: 1234 (after reset it shows 4D2 wap still works)
SPI MN-AAA: 1234 (after reset it shows 4D2 wap still works)
M Home Address: 066.179.166.148
Prim Home Agent: 010.000.005.021
Sec Home Agent:010.000.005.022
Rev Tunnel Pref: Disabled
Then save and edit Profile 2. Profile 2 I set to the exact same as Profile 1.
Save reset.
Dial ##1122 End (must be done quickly)
Go down to NGB config
Home URL: [Only registered and activated users can see links]
Proxy: wap.mycricket.com
Then exit save.
Now for the fun part first of all before you access EFS you need to unlock the Helio Ocean I used CDMA Workshop.
The password is 7341B6CDCFFA9692
Once phone is unlocked open bitpim and connect phone manually to the correct port. (You must close CDMA workshop for port to be available)
On top go to view, and make sure View filesystem is checked if not check it.
On the left go to Filesystem Now click the little blue folder
Once that pops up all the options click on wipi then shared, then NGB.
Under NGB folder you will see cwconfiguration.ini right click and save to the desktop.
Open file with winhex.
This should start on offset 46d On top go to position go to offset put 46d and i should take you to the beginning of [CONFIG] after that just copy my settings
[CONFIG]
URL=str:[Only registered and activated users can see links]
PROXY=str:wap.mycricket.com
SEARCH=str:[Only registered and activated users can see links]
JUNE=str:[Only registered and activated users can see links]
PORT=int:8080
AUTOCOMPLETE=bool:true
SCROLL=int:0
FONTSIZE=int:1
DTD=int:1
MENUSET=bool:false
DORMANTTIME=int:255
MUX=int:2337
NATE=int:1
COMPRESSION=bool:true
NEWURL=str:[Only registered and activated users can see links]
ZOOM_LEVEL=int:100
DEFAULT_FAILE_COUNT=int:0