MiFi 4620LE Not showing up in computer after drivers installed

[Jonathan White]

The device connects, but doesnt show anything is plugged in. Anyone know how to get the Status port up on this one?

[alenhoff]

Not sure I can help but i'm willing to try anyway. Since I don't know what you've tried or your experience with cdma or gsm devices i'll go ahead and try to get some more information on what you have done or not done. Not meaning any disrespect with any of these questions btw.

1. Did the drivers install with no problems?

2. Under device manager does it list the mifi at all under the ports category.

3. With the sound on and the device unplugged does your computer make the usual sound when connecting it showing it recognizes a new device has been connected.

4. Have you tried another usb port or another computer to verify it has the same condition on another port/computer.

Again I know these are basic questions but like I said. I don't know your experience with such things or what you have tried up until this point.

Also what cdma software are you using and have you tried dfs to see if it will list the port in question.

Possible information on the problem your having at the following post: [Only registered and activated users can see links]
That thread shows the 4620l not the 4620le so it would probably be best to see if it is compatible with your device or not. That part I do not know.

[thepabster]

Run the DUU and switch it out of HID mode. The ports will appear.

There's a thread on it here look around...

[Jonathan White]

I'm searching for the DUU, I did forget the name of the upgrade utility, so that'll help, thanks. And this is for the 4620LE, not the 4620L, right?

- - - Updated - - -

Hopefully the firmware is the same as It seems that they're the same other than the extended battery

[Jonathan White]

I did find the forum, thanks guys. It did it's Job. Here's the link to the DUU and it works for COMMing up the 4620LE as well.

[Only registered and activated users can see links]


Didnt refresh the page to see the link posted earlier. Thanks for the help :tears_of_joy: I had tried all the earlier steps mentioned for this one. All is well.

[alenhoff]

Glad to see you got it working for you.

[dragracing]

the link is down im trying to get the diag port to show drivers are installed