whitey10tc
02-02-2010, 08:45 PM
Titan cricket ROM and tutorial
I have included a custom ROM in this tutorial
1st off credit is due to those that wrote these programs I only take credit for putting this all together.
#1 use msl grabber to get the msl/spc code from here [Only registered and activated users can see links]
install via activesync or sd card and run on ppc.
#2 unlock with the unlocker [Only registered and activated users can see links]
#3 flash this sprint 6.1 ROM to update radio "WARNING DO NOT LET CUSTOMIZATION RUN" SOFT RESET WHEN IT SAYS AUTO CUSTUMIZATION IN 3 SECONDS. This is for GPS1 to work. [Only registered and activated users can see links] SPCS_AM_Ship.html
To do this connect USB to computer then Press power camera and Reset to get to bootloader red green yellow screen and connect to cable then run the exe file. DO NOT LET CUSTOMIZATION RUN SOFT RESET WHEN IT SAYS CUSTOMIZE IN 3 SECONDS.
#4 Install QPST on computer [Only registered and activated users can see links]
Install htc drivers on computer [Only registered and activated users can see links]
Vista users will need this driver [Only registered and activated users can see links] (Thanks to Sergey123456 from XDA)
Put phone into diag mode & connect to computer. computer should connect and find new device
run QPST configururation and add new port till you find your phone.
Now in QPST run from top menu start clients service programing.
Select phone
Read from phone imput spc/msl code from the grabber.
Then enter 000000 in the service programing field.
Write to phone
now while in QPST lets get your GPSone ste up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 209.210.15.72
pde port # 8888
pde transport IP
Position calculation mobile
Write to phone
close out
Do the following GPS Registry edits after installing desired ROM:
"HKLM\SOFTWARE\HTC\SUPL AGPS"
"GPSMode" value="2"
"ServerPort" value="8888"
"ServerIP" value="209.210.15.72"
I would recommend now to flash a custom ROM here is a link to one of mine: [Only registered and activated users can see links]
install on a FAT32 formated 2gig or less msd card and rename to titaimg.nbh THEN INSERT CARD AND PUT PHONE INTO BOOT LOADER AND FOLLOW INSTRUCTIONS.
You will need a cricket PRL to load through PST setting.
then go to this thread it will help you set up your pst setting correctly.
[Only registered and activated users can see links] yOU CAN ALSO DOWNLOAD THE MMS CAB FROM HERE and then
Install the cricketwapmms cab if using my ROM build included in this thread this is not needed.
Do not try to open a data connection untill you have cricket service on the phone.
[Only registered and activated users can see links]
you must have service.
Olipro for the unlocker and his great tutorial
Baffles for the MSL grabber.
and Ryanmogul6800 on XDA for his great software and his perfect PST setting.
I have included a custom ROM in this tutorial
1st off credit is due to those that wrote these programs I only take credit for putting this all together.
#1 use msl grabber to get the msl/spc code from here [Only registered and activated users can see links]
install via activesync or sd card and run on ppc.
#2 unlock with the unlocker [Only registered and activated users can see links]
#3 flash this sprint 6.1 ROM to update radio "WARNING DO NOT LET CUSTOMIZATION RUN" SOFT RESET WHEN IT SAYS AUTO CUSTUMIZATION IN 3 SECONDS. This is for GPS1 to work. [Only registered and activated users can see links] SPCS_AM_Ship.html
To do this connect USB to computer then Press power camera and Reset to get to bootloader red green yellow screen and connect to cable then run the exe file. DO NOT LET CUSTOMIZATION RUN SOFT RESET WHEN IT SAYS CUSTOMIZE IN 3 SECONDS.
#4 Install QPST on computer [Only registered and activated users can see links]
Install htc drivers on computer [Only registered and activated users can see links]
Vista users will need this driver [Only registered and activated users can see links] (Thanks to Sergey123456 from XDA)
Put phone into diag mode & connect to computer. computer should connect and find new device
run QPST configururation and add new port till you find your phone.
Now in QPST run from top menu start clients service programing.
Select phone
Read from phone imput spc/msl code from the grabber.
Then enter 000000 in the service programing field.
Write to phone
now while in QPST lets get your GPSone ste up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 209.210.15.72
pde port # 8888
pde transport IP
Position calculation mobile
Write to phone
close out
Do the following GPS Registry edits after installing desired ROM:
"HKLM\SOFTWARE\HTC\SUPL AGPS"
"GPSMode" value="2"
"ServerPort" value="8888"
"ServerIP" value="209.210.15.72"
I would recommend now to flash a custom ROM here is a link to one of mine: [Only registered and activated users can see links]
install on a FAT32 formated 2gig or less msd card and rename to titaimg.nbh THEN INSERT CARD AND PUT PHONE INTO BOOT LOADER AND FOLLOW INSTRUCTIONS.
You will need a cricket PRL to load through PST setting.
then go to this thread it will help you set up your pst setting correctly.
[Only registered and activated users can see links] yOU CAN ALSO DOWNLOAD THE MMS CAB FROM HERE and then
Install the cricketwapmms cab if using my ROM build included in this thread this is not needed.
Do not try to open a data connection untill you have cricket service on the phone.
[Only registered and activated users can see links]
you must have service.
Olipro for the unlocker and his great tutorial
Baffles for the MSL grabber.
and Ryanmogul6800 on XDA for his great software and his perfect PST setting.