Full Flash U340 to cricket

[thesmitty68521]

This was provided by Amoamare from Hofo and M-F.

To write the bin to the phone put the phone in emergency mode and choose emergency mode on the software write. Make sure to use the VZW U340 dll and Select Emergency + EFS on the SW tab

E-Mode = 9 +PWR

If it is a Verizon phone then write the ESN back to it using the CDMA Workshop and the Samsung Default password.

1. Type in 47*68#13580
2. type 001 to suspend the phone
3. Type in 013 "Channel" will appear. Type in 0925
4. Type 031 "MRU2 table" will appear. Type in 210925 press ok
5. Enter 120 "QBoot" will appear. Press 0 and then press OK
6. Enter 073 and the phone will reset.

[Only registered and activated users can see links]

[ownmart]

This was provided by Amoamare from Hofo and M-F.

To write the bin to the phone put the phone in emergency mode and choose emergency mode on the software write. Make sure to use the VZW U340 dll and Select Emergency + EFS on the SW tab

E-Mode = 9 +PWR

If it is a Verizon phone then write the ESN back to it using the CDMA Workshop and the Samsung Default password.

1. Type in 47*68#13580
2. type 001 to suspend the phone
3. Type in 013 "Channel" will appear. Type in 0925
4. Type 031 "MRU2 table" will appear. Type in 210925 press ok
5. Enter 120 "QBoot" will appear. Press 0 and then press OK
6. Enter 073 and the phone will reset.

[Only registered and activated users can see links]


from what I noticed
3. Type in 013 "Channel" will appear. Type in 0925
needs to be changed to 3. Type in 013 "Channel" will appear. Type in 0925#


After this you will need to NAM program ##NAM*
SPC will either be 000000 or 333333
Change MIN and MDN, and Home SID

[bawanyh]

hey smitty after we do the first step do we have to do #1200 and then ok?

[leadnerd]

isn't it easier just to rebrand it to cricket with the cricket files? Thats all I have done and they work great.

[ownmart]

isn't it easier just to rebrand it to cricket with the cricket files? Thats all I have done and they work great.

post up yours then? lol this rebrands it as well

[leadnerd]

I was just saying. because i have tried the 47*68#13850 and it doesnt do anything on a couple of these that i just got in.

I haven't looked yet but so far I have been having problems with two u340's with bootblock version u340_bb:AE22.1

[shutfu]

do you use samsungPST at all with this tutorial?

[whitey10tc]

do you use samsungPST at all with this tutorial?Follow the directions in post 1 and 2.

[ilostjames]

just want to know what do i change my MIN and MDN, and Home SID too

[ilostjames]

i just want to know what do i change my MIN and MDN, and Home SID too

[Wrecked Johnson]

i just want to know what do i change my MIN and MDN, and Home SID too

When you program your MIN use your MIN, when you program your MDN use your MDN and then program your SID to your SID that should get it

[ilostjames]

i did do all tht an it still say initial programming needed

[ilostjames]

When you program your MIN use your MIN, when you program your MDN use your MDN and then program your SID to your SID that should get it

i did do all tht an it still say initial programming needed

[Wrecked Johnson]

load prl 01042 and *228

[whitey10tc]

just want to know what do i change my MIN and MDN, and Home SID too


i just want to know what do i change my MIN and MDN, and Home SID too

i did do all tht an it still say initial programming needed

i did do all tht an it still say initial programming neededMultiple posts of the same question will not help you any faster, better or get you any further. Multiple posts of the same thing are considered Spam or post count padding. Both are violations of forum rules.

[ilostjames]

load prl 01042 and *228

ok now i know about the *228 but what is the " prl " just want to know

[Genuwine1976]

The prl is basicly a file with program code that places your phone on a certain carrier