lgnpst v1.1 lab full installer

[bigglou23]

[hide-thanks][Only registered and activated users can see links][/hide-thanks]

[Tannus]

LGNPST 1.2
[Only registered and activated users can see links]


I know store level works but I'm not sure if I could get lab installer 2 work right
It comes with component installers & Generic installers. Also has 17 generic dll's

[bigglou23]

IF YOU HAVE LGNPST 1.1 REMOVE IT


1st First INSTALL DRIVERS.

2nd INSTALL 1.2 STORE VERSION.

3rd THEN COPY AND PASTE LGNPST 1.2 LAB INTO THE LGNPST FOLDER.

4th THEN JUST OPEN AND RUN IT FROM WITHIN THE LAB 1.2 FILE

[ownmart]

**Mod edit**
Non working link removed
make a new lab folder in lgnpst and just drag n drop that stuff, its a copy of my working one
maybe itll help someone

[Tannus]

I'll try it out 2marrow. let U know if it works 4 sure

[Dex]

Here are the Steps for Installing LGNPST CORRECTLY with no Errors from LGNPST

Please uninstall any copy of LGNPST you have currently

1. Download [Only registered and activated users can see links] From Tannus' Post
2. Download [Only registered and activated users can see links] From Ownmart's post
3. Install the LGNPST Store Edition from the Tannus' archive
4. Open the Second Archive copy and Paste all contents into C:\LGNPST MAKE SURE TO OVER WRITE EVERY THING
5. ReRegister all DLLS

[chopeque-cell]

the link for file LAB_1_2.zip.html its down,, is there any other link for this file??? or can you post it again Mr. Ownmart's please?

[diana]

I am trying to flash ENV3 with LGNPST lab version 1.2. I installed them properly with following above(i think). I connect the phone and it recognized the vx9200, but when I click phone setting it says: "Unable to load utilcom component". Can someone help me?
Thanks alot :)

[123456&]

What dll are you using?
are you using vx9200 dll msi?

Do you have the right components installed? It seems as you need the right components, and generics. They also need to be registered.

[montosw]

does not work

[thesmitty68521]

I'm at a loss here..... What does not work??? Are you having problems downloading the file? Perhaps you are having problems getting the phone to read.

"Does not work" isn't a very good view of the situation for us to help you. Tell us in a bit more detail what your problem is.

[montosw]

sorry for the lack of detail. i couldn't get it to install. i ended up trying to get 1.2 and removed 1.1. however i cannot get 1.2 lab to work. if you have any pointer i would appreciate it. in the meantime i'm still working on this. thank you.

[montosw]

I have lgnpst 1.2 store. could someone please post 1.2 lab. Thank you

[thesmitty68521]

I have lgnpst 1.2 store. could someone please post 1.2 lab. Thank you

The Lab version 1.1 that is posted on here will work for everything. I don't even use the 1.2 version because it is not very stable. I am not sure the 1.2 lab version is available for free. I had to pay for it through Amoamare. I am not so sure he has made it public yet though.

[montosw]

IF YOU HAVE LGNPST 1.1 REMOVE IT


1st First INSTALL DRIVERS.

2nd INSTALL 1.2 STORE VERSION.

3rd THEN COPY AND PASTE LGNPST 1.2 LAB INTO THE LGNPST FOLDER.

4th THEN JUST OPEN AND RUN IT FROM WITHIN THE LAB 1.2 FILE


I followed Tannus directions but I'm getting a lg usb/parallel lockkey not detected. any ideas why that is?

[devin1205]

I've downloaded 1.2 lab and store but can't get the software to work. 1.2 store opens but doesn't do anything. when I installed 1.2 lab it trys to open then says no parellel key/usb key and will exit the program. I only have exe files and they don't ask me what folders to install them into. I can't seem to figure out how to copy all the 1.2 lab into the 1.2 store folder. any help? Devin

ps i'll i'm trying to do is get the spc code for my vx5600. I've already tryed the calculator and cdma ws but no luck still. THANKS!

[wthigon]

I've downloaded 1.2 lab and store but can't get the software to work. 1.2 store opens but doesn't do anything. when I installed 1.2 lab it trys to open then says no parellel key/usb key and will exit the program. I only have exe files and they don't ask me what folders to install them into. I can't seem to figure out how to copy all the 1.2 lab into the 1.2 store folder. any help? Devin

ps i'll i'm trying to do is get the spc code for my vx5600. I've already tryed the calculator and cdma ws but no luck still. THANKS!

Try SPC Generator 6.8, I believe it's available in this forum. That is what I use to get the SPC's for these phones. By the way, are you trying to flash the 5600 to cricket?

[devin1205]

thanks for the fast reply! i've tryed the spc generator 6.8 but it still doesn't work. I bought this vx5600 as a prepaid phone and want to use it on my post paid verizon account. I've gone through this before but on the 5500.

[maxmk09]

Will someone please tell me how to install this?

[maxmk09]

nvrmind i finally got it installed

[israel]

thanks "tannus"

[antivirus1]

lg usb/parallel lock key is not detected what is that..

[Nat3]

Hey guys...

ok i'm having a weird problem here. I've installed the lgnpst 1.1 lab version many many times on different PCs and works perfectly. But this time, I reformatted one of my PCs and tried installing the same exact version with the same exact way i've done before...but for some reason it just will not detect any LG phone that i plug in. I'm not the only one that has this problem..i kno 2 other ppl with the same issue...myself and others are experienced flashers but i've never had this problem and i'm stuck on what i should do.

If anybody knows why and has a solution for me. Let me know

Thanks

[Dex]

Hey guys...

ok i'm having a weird problem here. I've installed the lgnpst 1.1 lab version many many times on different PCs and works perfectly. But this time, I reformatted one of my PCs and tried installing the same exact version with the same exact way i've done before...but for some reason it just will not detect any LG phone that i plug in. I'm not the only one that has this problem..i kno 2 other ppl with the same issue...myself and others are experienced flashers but i've never had this problem and i'm stuck on what i should do.

If anybody knows why and has a solution for me. Let me know

Thanks


did u install LG drivers and register the DLLS

[Nat3]

yes...installed drivers and registered dlls successfully

[laphugo]

tks... testing Lg env

[kevininaz]

Hey guys...

ok i'm having a weird problem here. I've installed the lgnpst 1.1 lab version many many times on different PCs and works perfectly. But this time, I reformatted one of my PCs and tried installing the same exact version with the same exact way i've done before...but for some reason it just will not detect any LG phone that i plug in. I'm not the only one that has this problem..i kno 2 other ppl with the same issue...myself and others are experienced flashers but i've never had this problem and i'm stuck on what i should do.

If anybody knows why and has a solution for me. Let me know

Thanks

Did you ever solve this problem?

Or has anyone else encountered this and solved it?

[xxrake]

Thanks for share

[thesmitty68521]

Thanks for share

Step away from the paint chips.

[imTHEdano]

how do i register dlls?

[123456&]

how do i register dlls?

Check this thread
[Only registered and activated users can see links]

[naymsa]

thank u v much we will try

[Wesley D Box]

*** hidden content ***

thanks

[jackbox]

I cannot get any dlls to register in both windows 7 and windows xp. How can I get them to register?

[123456&]

I cannot get any dlls to register in both windows 7 and windows xp. How can I get them to register?

Follow this ([Only registered and activated users can see links])