Nam manual programming codes [Archive]

Dex

02-01-2010, 02:59 PM

Here is the same codes just pasted here for easier access

<<SAMSUNG>>

Samsung sph-n240, n400, a460, a500, etc Nam Programming :

Nam Set: ##Spc

Test Mode: 47*869#1235

Debug Menu: ##33284,ok

Service Menu: Menu+8+0 (#889)

Reset (Life time, Clear Memory, etc): ##786,ok

A-key: ##2539,ok

Label Selection: ##3882,ok

Label(Home, Work, etc) : **523,ok

NGG Setting (Gateway, etc.): ##2769737,ok

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Samsung a530, a610, a620, a660, a670, etc Nam Programming :

Nam Set: Menu, 6, *

Nam Set: ##3238, ok

Nam Set: ##SPC (##000000), ok

Service Menu: Menu, 9, *

Test Mode: 47*68#13580

Test Mode: 47*869#1235

Samsung X, E, V, S-series (korean models), e250, v420, s350, etc Nam Programming :

Nam Set: 6548#0**4#6

Nam Set: 47*869#08#9

Nam Set: 74153697193

Test Mode: 5809540*45680 (88 - EFS reset)

Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415

Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415

Debug Menu: Home(top of keypad)+0, 6725 or 9720 or 1973 or 0415

Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming :

Nam Set: 47*869#08#9

Nam Set: Menu+60

Test Mode: *759#813580

Test Mode: 5809540*45680

A-key: Menu+0, 25##

External Audio: Menu+0, ####

Debug Menu: Menu+8, 0415 or Spc

Debug Menu: Menu+9, 0415 or Spc

Brief NAM Programing: Menu+40,626 (not all version)

LCD Contrast: Menu+45 (not all version)

SIO Mode: Menu+49

SIO Mode: Menu+69

Samsung N356 (India version) Nam Programming :

Test Mode: Menu, 5, down arrow, *

Test Mode: **00## (in some flashes)

Samsung i700, etc Nam Programming :

Nam Set: Go to start and select "PHONE" from the drop down menu, dial #83587

Samsung i300, etc Nam Programming :

1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. Enter OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice

<<KYOCERA>>

Kyocera 2345, 3035, 5135, 6035, Se47, KX, KE - series, etc Nam Programming :

Nam Set: 111111+Jog Dial(Ok)

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Life Timer: ##786,ok

A-key: ##2539,ok

Tips:

On some kyocera handsets the factory service module has not been disabled

and the phone can be programmed without the Spc by inputting:

Nam Set: ##333333 menu (service)

Cricket Kyocera phones : 111111 >Menu>Service Later models ##626*

Qualcomm qcp-800 Nam Pogramming :

Nam Set: Menu+3+0+Spc

Field Test: Menu+7+0+Fsc

<<SANYO>>

Sanyo 4900, 5150, 5300, 8100, etc Nam Programming :

Nam Set: ##Spc+Ok+Key Down+Ok

Advanced Setup: ##3282+Ok+Key Down+Ok+Msl

A-key: ##2539+Ok+Key Down+Ok

Version: ##**837+Ok+Key Down+Ok

Debug Menu: ##FSC+Ok+Key Down+Ok

Airtime menu: ##8463+Ok+Key Down+Ok

Change CAI: ##7738+Ok+Key Down+Ok

Vocoder: ##8626337+Ok+Key Down+Ok

Reverse Logistic: ##786+Ok+Key Down+Ok

Set IP Address: ##2769737+Ok+Key Down+Ok

TTY On/Off: ##889+Ok+Key Down+Ok

Ready Link: ##4636+Ok+Key Down+Ok

Browser Init On/Off: ##4682+Ok+Key Down+Ok

Picture Token: ##25327+Ok+Key Down+Ok

Unknown Code: ##5282277+Ok+Key Down+Ok

(SPC=000000, FSC=040793)

Sanyo scp-A011, smp-A017, etc Nam Programming :

Nam Set: F9(3 beep) + 0*72696#767

<<AUDIOVOX / UTSTARCOM>>

Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming :

Power the phone ON and wait until the little light on top goes out, then press:

Nam Set: 289,Fcn, #,1

Service menu: Fcn,0,0, FSC

Power the phone ON and press:

Test Mode: Hold (2,*,Rcl) + Power

Test Mode Commands:

99 - download - flash phone
124 - inam data write
125 - version
126 - get ESN
127 - get SPC
128 - get User lock

129 - is WFTV data write
137 - get FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range

Audiovox (Hyundai) cdm-100, 130, 135, 8300, 8500, 8600, 8910, etc Nam Programming :

Nam Set: ##20022002, end

Read user lock: #5625*, end

Port settings: ##7678, end

DM baud rate: ##2283, end

DM mode enable: **1004, end

DS mode enable: **1005, end

Misc. Test: ##27752345, end

S/W Test1: ##27732726, end

S/W Test2: ##2240, end

Debug screen: ##2773, end

Clear MRU: ##6782, end

Rfnu_Contents: ##2250, end

?????: ##1133, end

?????: ##1144, end

P_Rev: ##7738, end

GPS Test: ##4771, end

A-Key: 2538**

SMS Eng: ##767364, end

Battery_adc: ##2768, end

Tests: ##1122, end

Audiovox 8610, 8910, etc Nam programming :

Name Set: ##847446, end, 111111

Cricket 8910: 20022002+end

Audiovox pcx-3500xl Nam Programming :

Nam Set: ##2726+Send+1998+1+Spc+1

Audiovox-107 Nam Programming :

Nam Set: 45680*47*869#1

Audiovox CMP-3 Nam Programming :

Nam Set: 45680*47*869#1

Dm Mode: Menu, 6, 6

Audiovox 9950 Nam Programming :

Nam Set: ##3282

Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming :

Nam Set: m + # + envelope key + * + 1

Audiovox Thera (Toshiba 2032) Nam Programming :

Thera Nam Programming User Manual - nam_thera.pdf

Audiovox (UTStarcom) PPC 6600, 6700, etc Nam Programming :

Nam Set: ##778+ Send

Nam Set: #*#SPC + Send

Nam Set: ##778#

DM mode: ##3424 + Send

DM mode: #*#3424 + Send

DM mode: ##3424#

Programming User Manual - programming_instructions.pdf

UTStarcom TXT 8010 Nam Programming :

DM mode enable: *#6870

DM mode disable: *#6871

<<MOTOROLA>>

Motorola 7760, 7860, 2260, 8160, etc Nam Programming :

Nam Set: Fcn,0000000000000, Rcl

Nam Set: 74663#, Fcn, Fcn

Test Mode: Fcn, 00**83786633, Sto

Motorola v60c, v120c etc Nam Programming :

Nam Set: 74663#, Menu, Menu, Spc

Nam Set: Menu, 073887, * (type quickly)

Test Mode: Menu, 073887*, Spc

Debug Mode: ##33284

Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to "PrefMod"

4) RIGHT Softkey (Change) until you see "DigOnly"

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it correctly)

Motorola Razr V3C Nam Programming:

Nam Set: 74663 # clr clr

Nam Set: #073887* , then SPC

Motorola Q Nam Programming:

Nam Set: [Send] + 074663 + [Send] + [Send], Selecct NAM#
Service programing: ##073887* +Send

Newer VZW Motorolas: ##PROGRAM + Send

Motorola t182, c210, etc Nam Programming :

Nam Set: ##298645665, end

Short Nam: ##073887, sto

Debug Menu: ##1111, end

Service Menu: ##2222, end

Sound NS/EC on/off switch: ##1113, end

Motorola v710, v730, v740, ms150, etc Nam Programming :

Nam Set: 8378*# + press 3 times NATE (spc - 071082)

Test Mode: Menu, 073887*, Spc

Service Menu: #758353266#646#

Motorola StarTac 2004 Nam Programming :

Nam Set: 5759789*#, press "Rec" button 3 times, (spc - 915037)

Motorola ms200, ms400, ms800, etc Nam Programming :

Nam Set: 5759789*#, press "Camera" button 3 times, (spc - 915037)

Nam Set: 246791538*#, press "Camera" button 3 times, (spc - 915037)

Motorola v6060 Nam Programming :

Nam Set:147*369#456*0#

MOTOROLA TEST MODE :

v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to "Enter a Security Code", press 000000, OK

3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"

choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of the screen.

5) To toggle between regular mode and test mode: Press MODE then

quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then follow

the above sequence and scroll down to where it says "DISABLE" instead of

"ENABLE" and choose select.

Motorola Bible (old models) - bible.txt

<<NOKIA>>

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming :

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

Esn Number: *#92772689#

Restart Phone: *#75681#

Restart Phone: *#75682#

Nokia 8887 Nam Programming :

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#8378#

Esn/Data/Timer: *#92772689#

SID: *#743#

Nokia 8587 Nam Programming :

Nam Set: *#626#7764726#

A-Key: #8159357022#4579# (26 digits)

A-Key: #8159357022#4547# (20 digits)

Version: *#0000#

Version: *#837#

Vocoder: *#3872#

Change language: Menu 5, 3, 1

Change DM mode: *#7678#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#

SPC Unlock, Factory Reset :

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC)

NOKIA TEST MODE:

51xx, 61xx, 71xx, 3285, 63xx, etc :

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 0 0 and then choose OK.

3360, 6360, etc :

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.

<<LG>>

LG LX, VX, PM-series, VX4400, VX6000, VX8550, PM225, etc Nam Programming :

Nam Set: ##Spc(#)

Nam Set: Menu, 0

Nam Set for VX8550: ##77647268550 + Send

Advanced Settings: ##2342(#)

Vocoder: ##8626337,ok(#)

CAI Change: ##7738,ok(#)

Enable TTY: ##889,ok(#)

A-key: ##2539,ok(#)

A-key: 2539**

Feature: ##3328873 + Send

Service Info: #4357*4357

gps Air Test: #477247

Reset (Life time, Clear Memory, etc): ##786,ok(#)

Service Programing New LGs:##PROGRAM(model #) +send i.e. ##PROGRAM10000 +send

lgc-300, etc Nam Programming :

Nam Set: Menu, 9, Spc

A-key: Press "Sto" 3sec, 2539**

lgc-330w, etc Nam Programming :

Nam Set: Menu, 4, 0, Spc

A-key: 2539**

lgc-510, v111, etc Nam Programming :

Nam Set: Menu, 3, 0, Spc

A-key: 2539**

lgc-500, 800w, etc Nam Programming :

Nam Set: Menu, 9 , 0, Spc

Debug Mode: Menu, 7, 0, Fsc

Debug Mode: Menu, 8, 0, Fsc

A-key: 2539**

<<ERICSSON / SONY-ERICSSON>>

SonyEricsson T608, etc Nam Programming :

Nam Set: 923885, joystick >, 111111

Nam Set shot: 987, joystick >, 111111

Nam Set long: 222652, joystick >, 111111

Vocoder: ##8626337, joystick >, 111111

Debug screen: ##33284, joystick >

Life Timer: ##786, joystick >

SW ver: 9#4#3#, joystick >

Edit Profile: ##3282, joystick >

Service menu: *#06*

Ericsson A1228c, T61, etc Nam Programming :

Short NAM: 987+Menu

Long NAM: 923885+Menu+Spc

CDMA Mode: 904093+Menu

Analog Mode: 904095+Menu

QNC: 904097+Menu

Debug Screen: 904090+Menu

DM Mode: 904050+Menu

<<EPSILON / COMPAL>>

Epsilon vc-5x, Compal 1100, etc Nam Programming :

Nam Set:: **321456987##

Short Nam: **147258963##

Service Menu 1: **1232580##

Service Menu 2: **078987##

Service Menu 3: **1234756##

Show SPC: **3214569871472365##

Version: **1470963##

Debug: **000000##

A-key: 2539**

Reset: **14789##

<<SK TELETECH>>

Sky All Models Nam Programming :

Nam Set: #7583538324#626#

Nam Set: *759#364*7388464#

Min simple mode: #758353266#646#

Irm simple mode #758353266#476#

Voice memo: #8767#277#

Test Mode: #7583538324#8378#

A-key: #758353266#2539#

Service Menu: Menu+4+0+Spc

Service Menu: Menu+5+0+Spc

<<WITHUS / MODOTTEL>>

Withus wce-100, 200, 300, etc Nam Programming :

Nam Set: ##948487+Save

Nam Set: ##948482+Save

ESN write: ##66835+Save (wce200 only)

SMS Settings: ##76766

NVM Rebuild: ##777464

<<GTRAN>>

Gtran gcp-2000 Nam Programming :

Nam Set: 01#737+Spc

Debug Menu: 01#324+Spc

Debug Mode: 01#727

Test Mode: 01#764+Spc

System Test Mode: 01#768+Spc

Gtran gcp-5000 Nam Programming :

Debug Mode: 01#727+Spc

Test Mode: 01#765

<<HYUNDAI>>

Hyundai hwp-110 Nam Programming :

Nam Set: #86904**89397#

DM Mode: ##2740*

(Open phone, inter code, close phone)

Hyundai hgc-120, 130, 200 Nam Programming :

Nam Set: #86904**89397#

Hyundai hgc-310, 600, 610 Nam Programming :

Nam Set: ##20022002, end, 1, Spc Code

Field Test: ##20022002, end, 1, Master Code

Hyundai Curitel h100, 150, hx510b, 520, etc Nam Programming :

Nam Set: ##20022002, end, 1, Spc Code

Field Test: ##20022002, end, 1, Master Code

A-key: 2539**

Debug Menu: ##27732726, end

Sar Test: ##27752345, end

Baud Rate: ##36**, end

DM mode enable: **1004, end

DS mode enable: **1005, end

Test Bell/Voice/Led/Dot: ##1122, end

RF Mode: ##2240, end

Ras Ram: ##2774, end

Cmux1: **0481, end

Cmux2: **0482, end

RX Mode Fax: **0492, end

RX Mode Data: **0491, end

RX Mode Reset: **0490, end

<<HUAWEI>>

Huawei ETS-668, 678, 688, etc Nam Programming :

Debug Mode: ##44+Menu

Debug Screen: ##33+Menu

CDG2 Test enable: ##234+Menu

CDG2 Test disable: ##432+Menu

China Lang Select: ##123+Menu

Blocking Debug Code: ###888+Menu

Home System Only On: ##461+Menu

Home System Only Off: ##460+Menu

Master Code for all Huawei models is - 309296

<<PANTECH / CURITEL>>

Pantech hx-525b, 550, 570, 575, etc Nam Programming:

Nam Set: ##13*92*#62* + Pwr

Debug Mode: ##*193*762534#* + Pwr (R-UIM mode disable)

Debug Mode: ##27732726 (R-UIM mode enable)

DM Mode Enable: ***18*#826*

Full Reset: ##03*934#9367*192#397#7412569746 + Pwr

MultiTest: ##22635*262* + Pwr

Cmux1: ***12*#811# + Pwr
Cmux1: ***37*#922* + Pwr
RX Mode Data: ***83*#247 + Pwr
RX Mode Reset: ***64*#133# + Pwr
DS Mode On: ***12045#*# + Pwr
RF NV Init: ##0*#*63861829372# + Pwr
RAS_RAM: ##3*13091#1279#* + Pwr

<<TREO>>

Palm One Treo 600, 650, 700, etc Nam Programming :

Nam Set: ##SPC + Send

Nam Set: #*#SPC + Send

Nam Set: ##SPC#

DM mode: ##3424 + Send

DM mode: #*#3424 + Send

DM mode: ##3424#

Debug: ##33284

Programming User Manual - programming_instructions.pdf

Resetting Treo - resetting_treo650.doc

<<BLACKBERRY>>

BlackBerry Nam Programming :

Nam Set: ##SPC + Send

Service screen1: #4357* + Send

Service screen2: hold down Alt+Shift , then press "H"

<<AXESSTEL>>

P800, T800, P1900, T1900, etc Nam Programming :

Nam Set: 47*68#47*869#

DM mode: ##9* + Send

Data cable select: menu + 7 + 1 + #

Data Manager: **##11

Data (Internet): **##13

Data USB: **##32

<<VK MOBILE>>

VK-100C, 110C, 200C, etc Nam Programming :

Nam Set: 153147539741593

Test Mode: 153147539123258 (88 - clear efs (set language to korean before))

<<GIGA TELECOM>>

Z510, Z710i(gcd-456) Nam Programming :

Nam Set: Menu+0+Spc

<<AnyDATA>>

AMC450 Nam Programming :

Nam Set: *74269#*748#96148063+SEL

<<ZTE>>

ZTE C150, C160, C170, C180, C220, etc Nam Programming:

Nam Set: *983*3641# (R-UIM mode)

Nam Set: #1463*389*

ZTE C201 Nam Programming:

Nam Set: *983*7358#

<<UBIQUAM>>

U100, U105, U200, U300, etc Nam Programming :

Nam Set: ##3435871

BREW Set Menu: ##8242739

System Test: ##33582

Handset Test: ##3435873

Handset Test: ##3435875

Factory Test Mode: ##3435874

<<SYNERTEK>>

Synertek S200 Nam Programming :

Nam Set: Menu+0+Spc

A-Key: 2539**+Save

Test vibro/rx/tx: ##5555+Save

Debug Screen: ##33+Save

Debug Screen: ##523+Save

RF Test: ####+Save

LCD type: ##325+Save

Synertek S500 Nam Programming :

SAR Test Strife test: *#0000#
Debug screen: *#8378#
Clear LCD: *#848378#
Debug menu: *#443336# (R-UIM mode)
CDG , Service option: *#234#
Function Test, LCD Contrast: *#878#

<<SONY>>

Sony CM-M1300, 3300, Z200 Nam Programming :

Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc