PDA

View Full Version : Cricket HTC Touch Pro Rom



Dex
01-30-2010, 04:41 PM
This is a rom i created for the Touch Pro a long time ago it runs well and is Cricket Ready just Unlock Flash and Enjoy

PLEASE MAKE SURE U ARE REGISTERED WITH PPCGEEKS B4 Clicking on the links for Hard SPL below



Hard SPL for Sprint/Others ([Only registered and activated users can see links])

Hard SPL for VZW Touch Pro ([Only registered and activated users can see links])

Dex's Cricket Touch Pro Rom Verssion 1 ([Only registered and activated users can see links])

[Only registered and activated users can see links]

whitey10tc
01-30-2010, 05:08 PM
Hey Dex,
Is this WM 6.1 or 6.5? Good work,
I've got another two weeks before I release my TP and Diamond WM 6.5.3 cricket ROMS.

Dex
01-30-2010, 05:11 PM
Its Windows Mobile 6.1 this was just an intial release i made almost a year ago for my wifes TP im currently tryin to find the right combo on the 6.5 roms and will release one here within a week

ownmart
02-05-2010, 04:20 PM
sweet,so just hard spl and rom it and its good to go? good. kickin energy rom to the curb :) thanks, gonna try on my sprint touch pro as well as the verizon

note:
PST settings still need to be done with reauthenticate etc. correct? no cabs needed?

Dex
02-05-2010, 06:01 PM
yes u need to do pst settings

Laderius
02-08-2010, 03:02 AM
Thanks Dex any news when an updated rom will be released? 6.5 and tweaked out like this great 6.1 one?

Dex
02-09-2010, 12:45 AM
well that 6.1 rom was old lol it worked and the 6.5 got postponed since i sold my TP and upgraded to the Touch Pro 2 and that rom is in the works as we speak not to mention my wife has a TP so i will use hers for testing if i dont die from testin on it lol

bawanyh
03-03-2010, 08:18 PM
Is this Touch Pro rom gonna work on alltell pro?

Thanks

whitey10tc
03-03-2010, 08:31 PM
Is this Touch Pro rom gonna work on alltell pro?

Thanks
Unless Dex wrote some code in it for a specific device ID, it will. The only difference is with the Verizon TP and that one requires a different unlocker than the others. Verizon id is Raph500 and the others device id is raph800 if that's any help.

bawanyh
03-04-2010, 07:53 PM
Are you sure it needs a different unlocker because I did some diamonds on alltel and I unlocked them with the unlocker that I have which is for the sprint one and it unlocked it fine. It even flashed the rom on it to but the only problem that I am having is pic msg and int is not working. any suggestions?

Thanks

whitey10tc
03-04-2010, 08:01 PM
Are you sure it needs a different unlocker because I did some diamonds on alltel and I unlocked them with the unlocker that I have which is for the sprint one and it unlocked it fine. It even flashed the rom on it to but the only problem that I am having is pic msg and int is not working. any suggestions?

Thanks For Verizon you may need a different unlocker, here is the link for the TP [Only registered and activated users can see links] all other use the Sprint unlocker. For the MMS what exactly is it doing/ not doing?

bawanyh
03-04-2010, 08:12 PM
it just doesn't go through it gives me username and password not correct error

whitey10tc
03-04-2010, 08:21 PM
it just doesn't go through it gives me username and password not correct errorStart by checking your EPST setting, Security tab username and pass, MIP default tab Default profile username and passwords. and you said this was an alltel, Right? There could be some other thing hanging up and reverting. But give it a try.

bawanyh
03-05-2010, 07:09 PM
Thanks I will do that. I will try flash another phone lets see how it goes.

thanks

Dex
03-06-2010, 12:53 PM
This rom should work on all versions of the Touch Pro including VZW i dont mess with pagepool so its set right for all devices enjoy

bigglou23
03-11-2010, 04:59 AM
Very nice rom Dex, tried it today for the first time :)

eric303
03-11-2010, 01:32 PM
[Only registered and activated users can see links]

eric303
03-11-2010, 02:18 PM
K i just reflashed the whole thing and it worked like a charm, so maybe somthing got hung up.

Dex
03-11-2010, 02:42 PM
u must make sure u delete the alltel iota stuff but this rom was made from scratch so alltel settings shouldnt be there at all unless something else is done

GT*Superbee
03-28-2010, 03:20 PM
Thanks dex, yo da mannnn

GT*Superbee
03-29-2010, 02:02 PM
Excellent touch pro rom, one of the best for sure, only downfall is the phone is a little slow..

thesmitty68521
04-01-2010, 03:08 PM
I use this and it fails. I get this error:

Error 262 Update Error: Update utility has encountered communication errors during the update process.

Did a search on this and nothing helped. Appreciate any help I can get on this

thephoneguy913
04-01-2010, 03:43 PM
Make sure the phone is recognized for ActiveSync...also,make sure the phone is not in Diagnostic mode...

whitey10tc
04-01-2010, 05:42 PM
Place the phone in to bootloader mode and plug into PC and wait till serial changes to USB at the bottom. Also make sure that you have the correct SPL unlocker installed.

thesmitty68521
04-01-2010, 06:15 PM
How do you get this here thing in bootloader mode? lol

whitey10tc
04-01-2010, 06:24 PM
How do you get this here thing in bootloader mode? lol
Try this you have to hold volume up and power at the same time, and use the stylus to perform a soft reset but it should trigger it to bootloader
I would also do this while ur phone is off since i don not believe you can get into manual bootload while it is on.

If that doesn't work there is a cab on ppcgeeks that TMZ posted a while back that will do it also.

thesmitty68521
04-01-2010, 07:02 PM
The utility is putting it into bootloader and it is showing a progress bar. It stays at 0% for about three or four minutes then says the 262 error. Am I not putting the rom in the correct folder? I just have everything on my desktop and then go from there.

I appreciate all the help I am getting so far.

whitey10tc
04-01-2010, 07:16 PM
The utility is putting it into bootloader and it is showing a progress bar. It stays at 0% for about three or four minutes then says the 262 error. Am I not putting the rom in the correct folder? I just have everything on my desktop and then go from there.

I appreciate all the help I am getting so far.
OK post the following:
Everything it says in the tricolored bootloader screen.
What ROM are you flashing
What is the radio version of the phone.
Also who is the original carrier?

thesmitty68521
04-01-2010, 08:54 PM
I am using Dex's ROM from this thread.
It is a US Cellular phone
The radio version on the phone now is: 1.07.06F
The current ROM version is: 1.08.573.1

On the bootloader screen it says:

RAPH800
SPL-0.40.0000
MicroP-Hermann (LED) v0c85
MicroP-Hermann (KEY) V0685
PSOC-Raph STAGE_EVT v20

At the bottom it says
Serial

whitey10tc
04-01-2010, 09:16 PM
OK, The reason you are unable to flash a custom ROM is the SPL 0.40 is a stock SPL, you will first need to unlock it using the .37 unlocker from here
[Only registered and activated users can see links]
then you can flash custom ROMS.
Your radio is a GPS radio and it appears you are running a stock WM 6.1 ROM currently.

thesmitty68521
04-01-2010, 11:15 PM
Worked like a charm. I was able to load the ROM to it. Thanks Whitey!

However, now I am unable to shut down the phone. It says "Shortcut invalid" I tried to do a soft reset thinking that would work but it didn't.

whitey10tc
04-01-2010, 11:50 PM
Worked like a charm. I was able to load the ROM to it. Thanks Whitey!

However, now I am unable to shut down the phone. It says "Shortcut invalid" I tried to do a soft reset thinking that would work but it didn't.
I had similar issues in the past try a hard reset, if that doesn't solve it re-flash the ROM.

Dex
04-02-2010, 01:15 AM
no its the rom the power button dont work but u might be able to find a cab to get it too its the build base i used i has never worked

whitey10tc
04-02-2010, 01:30 AM
Well if thats the case smitty install this [Only registered and activated users can see links]

Dex
04-02-2010, 02:20 AM
HA HA HA thanks whitey i think u saved smittys life on that one lol

visions
08-04-2010, 05:57 PM
I ran the unlocker...but what should my SPC be? how can i find SPC for HTC PRO RAPH100 SPRINT?

thanks

whitey10tc
08-04-2010, 06:03 PM
I ran the unlocker...but what should my SPC be? how can i find SPC for HTC PRO RAPH100 SPRINT?

thanksGoogle bafs msl grabber or check in the HTC/windows mobile cabs and OEM sub forum it might be there. But really bafs or CDMA WS are the easiest way to get it.

sinewaves
01-17-2011, 01:40 AM
I do a factory reset to the phones first thing before I install the hspl and rom works flawless everytime. E)